Professional Documents
Culture Documents
Configuracion Lector CB SAT LI102W
Configuracion Lector CB SAT LI102W
: SAT LI102W
1 Scanner overview 3 Cable connection guide 4 Scanning method and distance
1D Barcode Scanner
LED Indicator (1)USB Data cable
Quick Start Guide Buzzar Scanning window
Scanner
Trigger Bu on
1D Cradle LED
Indicator
Cardle 5CM
e6 ~1
st anc
Contents:● Barcode Scanner ●Cradle
● Quick Start Guide
2 Cable plug&Unplug (2)RS232 Data cable The
bes
t di
Correct Wrong
② Press the buckle click, NOTE: LED beam should be full coveraged
① Plug as picture above
then pull out the cable on the bar code
② Note: Upload data: Bar code data will transmit to terminal once
Real me mode: Scan and transmit data will automa cally lost scan this bar code.
if upload failed. Date sum: Scan “Data sum”bar code to check the scanner
Cache mode: Same as real me mode if connec on normal. restore data sum.
Scan bar codes will be automa cally restore if connec on Clear data: Scan“Clear data” and clear all the restore
failed. Will upload one by one if connec on return as normal. data in scanner
Inventory Mode : Scanning bar codes will be restored without
upload.
Pair in one step Will upload once scan “Upload data”barcode.
Will clear once scan“Clear data”.
Will check sum once scan”Data sum” .
Wierless Settings ③ Suffix
Set up process:
④Sleep Time Setting Light
This part is valid for wireless se ngs only The sleep me means the me between the last opera on move and
LED Status Descrip on
①Defaults Parameter ❶Scan the bar code of“Enter Setting”.
auto turn off the scanner. User able to scan the corresponding bar code
of the sleep me which is needed to accomplish the sleep me se ng. Scanner
The default se ng allows the scanner to be restored
Set up process: Green light on Power on/ Working normally
to the factory se ng state. Enter Se ng ❶Scan the bar code of“Sleep Time”. Red light blinks Pairing match
❷Scan the bar code of "Custom Suffix".
Set up process: Green light blinks once Upload successfully
❶Scan the bar code of“Enter Setting”.
Sleep Time Green light blinks twice Upload failed
❷Scan one of the bar code below as sleep me. Red light on Low ba ery
Custom Suffix
Blue light on Charging normal
Enter Se ng ❸Scan one of bar code below as suffix
Green light on Charging complete
❷Scan the bar code of “Restore Defaults”. 20S
Green light blinking Pairing unsuccessful
60s
None
Restore Defaults
3min
❸Scan the bar code of "Exit and Save". *0x0D (CR)
5min Cradle
Green light blinks 30s Pairing state
Exit and Save 0x0A (LF) 15min Red light on USB iden fy failed
②Numeric Keypad TAB 30min
Green light blinks once Uploaded successfully
Configura on method: Scan the func on bar code directly. ❹Scan the bar code of “Exit and Save”. None sleep Green light on Working normally
❸Scan the bar code of “Exit and Save”.