Professional Documents
Culture Documents
Kaztec Fabrication Yard, Snake Island: Job Safety Analysis (JSA)
Kaztec Fabrication Yard, Snake Island: Job Safety Analysis (JSA)
Kaztec Fabrication Yard, Snake Island: Job Safety Analysis (JSA)
Sequence of Basic Job Steps Potential Accidents OR Hazards Recommended Safe Job Procedure
Overload of lift Never exceed the posted lift capacity (including worker,
Fall hazards material, and tools).
Pinch Points
Ensure personnel working in basket are tied off using full
Potential for roll over
body safety harness
Electrical hazards
Dropping tools on personnel Never work or walk under loads
Strains and Sprains
Only use lift on flat level ground
Keep hands free from pinch points and wear appropriate
hand gloves
Do not use lift within 10ft of energized power lines
Tie off tools or otherwise secure them from falling below
Tape off or barricade work area
Personnel must always stand firmly on the floor of the
basket, not sit or climb on the edge of the basket or planks,
or other devices for a work position.
Avoid over-reaching, hyper-extending, location/position of
extremities.
Transfer of roofing material Fall hazards Never work or walk under loads
top roof Pinch Points
Only use lift on flat level ground
Potential for roll over
Electrical hazards Keep hands free from pinch points and wear appropriate
Dropping tools on personnel hand gloves
Strains and Sprains Do not use lift within 10ft of energized power lines
Tie off tools or otherwise secure them from falling below
Tape off or barricade work area
Personnel must always stand firmly on the floor of the
basket, not sit or climb on the edge of the basket or planks,
or other devices for a work position.
Avoid over-reaching, hyper-extending, location/position of
extremities.