Professional Documents
Culture Documents
Eriks - Rubber Mouldings PDF
Eriks - Rubber Mouldings PDF
Eriks - Rubber Mouldings PDF
RUBBER MOULDINGS
Aflas® 223002 Aflas® FEPM 75° General purpose quality black -10/+250
EPDM 559302 EPDM 70° Food-Pharma industry FDA-USP XXIII black -55/+150
class VI
EPDM 559306 EPDM 75° For contact with KTW, DVGW, black -55/+150
potable water WRC, W-270
Genuine Viton® GLT 514115 FKM 70° Original Viton GLT for black -40/+200
®
Low temperatures
Genuine Viton® A 51414 black FKM 75° General purpose black -20/+200
®
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
1
RUBBER TECHNOLOGY
RUBBER MOULDINGS
Genuine Viton® A 51414 green FKM 75° General purpose green -20/+200
®
Genuine Viton® GF 514141 FKM 75° Original Viton GF- black -10/+200
®
Terpolymer
Genuine Viton® GFLT 514712 FKM 75° Good low temperature and black -40/+200
®
Extra clear
Extreme ETP 514016 FKM 80° Paint and solvent industry black -20/+200
®
Genuine Viton® A 514680 FKM 80° Food & Pharma / FDA 177.2600 black -20/+200
®
Extraction tested
FKM 514676 FKM 75° Very low compression set FDA 177.2600 white -20/+200
USP Class VI
Kalrez® Spectrum™ 6375 FFKM 75° Excell. chemical resistance/ black 275
High temperature stability
Silicone 714742 VMQ 40° Food & Pharma / FDA 177.2600 white -60/+200
Extraction tested
Silicone 714762 VMQ 60° Food & Pharma / FDA 177.2600 white -60/+200
Extraction tested
Silicone ST-EC-60-001 VMQ 60° Standard quality FDA 177.2600 Transl. -60/+200
Peroxide cured
Silicone 714177 VMQ 70° General purpose quality FDA 177.2600 red -60/+200
Silicone 714787 VMQ 80° Food & Pharma / FDA 177.2600 transl. -60/+200
Peroxide cured /
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
2
RUBBER TECHNOLOGY
RUBBER MOULDINGS
A f l a s ® 7 5 - c o m p o u n d 2 2 3 0 0 2 - Te c h n i c a l D a t a S h e e t
1. Introduction
Aflas® 223002 is made of Aflas® FA-100H, a FEPM rubber. Peroxide cured.
This material has excellent resistance to acids, steam, hot water, hydraulic and
brake fluids.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
3
RUBBER TECHNOLOGY
RUBBER MOULDINGS
N e o p re n e ® 7 0 - c o m p o u n d 3 2 9 0 6 - Te c h n i c a l D a t a S h e e t
1. Introduction
The ERIKS Neoprene® 70 32906 compound is made of Polychloroprene-Neoprene.
It is a standard moulding quality with good ozone and weathering resistance.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
4
RUBBER TECHNOLOGY
RUBBER MOULDINGS
N B R 7 0 - c o m p o u n d 3 6 6 2 4 - Te c h n i c a l D a t a S h e e t
1. Introduction
NBR 70-compound 36624 is a Nitrile compound with medium percentage of
acrylonitrile. Standard compound with good compression set values for contact
with hydraulic fluids.
2. Product Description
Chemical Composition : Acrylonitrile / Butadiene Rubber
Physical form : Mouldings
Colour : Black
Odour : None
Storage stability * : ± 7 years
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
5
RUBBER TECHNOLOGY
RUBBER MOULDINGS
N B R 7 0 - c o m p o u n d 3 6 6 4 7 0 - Te c h n i c a l D a t a S h e e t
1. Introduction
NBR 70-compound 366470 is an FDA Nitrile compound with medium percentage of
Acrylonitrile.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
6
RUBBER TECHNOLOGY
RUBBER MOULDINGS
N B R 9 0 - c o m p o u n d 4 7 7 0 2 - Te c h n i c a l D a t a S h e e t
1. Introduction
NBR 90-compound 47702 is a Nitrile compound with medium percentage of
Acrylonitrile. Standard compound with good compression set values for contact
with hydraulic fluids.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
7
RUBBER TECHNOLOGY
RUBBER MOULDINGS
N B R 9 0 - c o m p o u n d 3 6 6 4 9 0 - Te c h n i c a l D a t a S h e e t
1. Introduction
NBR 90-compound 366490 is a Nitrile compound with medium percentage of
Acrylonitrile. In conformity with FDA 177.2600.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
8
RUBBER TECHNOLOGY
RUBBER MOULDINGS
H N B R 7 0 - c o m p o u n d 8 8 6 2 5 - Te c h n i c a l D a t a S h e e t
1. Introduction
HNBR 70-compound 88625 is a hydrogenated Nitrile compound of standard quality
for use in the industry. This compound has good chemical and mechanical properties.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
9
RUBBER TECHNOLOGY
RUBBER MOULDINGS
E P D M 7 0 - c o m p o u n d 5 5 6 4 1 - Te c h n i c a l D a t a S h e e t
1. Introduction
EPDM 70-compound 55641 is a standard EPDM Terpolymer, Peroxide cured.
It has a good compression resistance.
2. Product Description
Chemical Composition : Ethylene / Propylene / Diene Terpolymer - Peroxide cured
Physical form : Mouldings
Colour : Black
Odour : None
Storage stability * : 7 years
3. Physical Properties
10
RUBBER TECHNOLOGY
RUBBER MOULDINGS
E P D M 7 0 - c o m p o u n d 5 5 9 1 4 - Te c h n i c a l D a t a S h e e t
1. Introduction
EPDM 70-compound 55914 is an EPDM Terpolymer sulphur cured.
It is the industrial standard EPDM moulding compound.
2. Product Description
Chemical Composition : Ethylene / Propylene / Diene Terpolymer
Physical form : Mouldings
Colour : Black
Odour : None
Storage stability * : ± 7 years
3. Physical Properties
5. Chemical Resistance
Air : excellent 7. Other Information
Alcohol : excellent • See also our compound 55914PC
Alkali : excellent for better steam and temperature
Fats : unsatisfactory resistance.
Hydrocarbons : unsatisfactory
Ethers : excellent
Esters : unsatisfactory
Acids : fair
Oils : unsatisfactory
Water : excellent
Steam : good
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
11
RUBBER TECHNOLOGY
RUBBER MOULDINGS
E P D M 7 0 - c o m p o u n d 5 5 9 1 4 P C - Te c h n i c a l D a t a S h e e t
1. Introduction
EPDM 70-compound 55914 PC is an EPDM Terpolymer Peroxide cured. It is a high
performance EPDM compound.
2. Product Description
Chemical Composition : Ethylene / Propylene / Diene Terpolymer
Physical form : Mouldings
Colour : Black
Odour : None
Storage stability * : 10 years
3. Physical Properties
12
RUBBER TECHNOLOGY
RUBBER MOULDINGS
E P D M 7 0 - c o m p o u n d 5 5 9 2 7 3 - Te c h n i c a l D a t a S h e e t
1. Introduction
EPDM 70-compound 559273 FDA-USP is an EPDM Terpolymer Peroxide cured,
specially designed for use in the food & pharma industry and in conformity with FDA
21 CFR 177.2600 and USPXXV class VI.
2. Product Description
Chemical Composition : Peroxide cured, Terpolymer of Ethylene / Propylene and Diene
Physical form : Mouldings
Colour Black
Storage stability * : ± 10 years
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
13
RUBBER TECHNOLOGY
RUBBER MOULDINGS
E P D M 7 0 - c o m p o u n d 5 5 9 3 0 2 b l a c k - Te c h n i c a l D a t a S h e e t
1. Introduction
EPDM 70-compound 559302 is an EPDM Terpolymer Peroxide cured. It is a high
performance EPDM compound. Conform to FDA 177.2600, 3A Sanitary Standards
class I and USP XXIII class VI. Certified by Toxicon Laboratory.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
14
RUBBER TECHNOLOGY
RUBBER MOULDINGS
E P D M 7 5 - c o m p o u n d 5 5 9 3 0 6 b l a c k - Te c h n i c a l D a t a S h e e t
1. Introduction
EPDM 75-compound 559306 is an EPDM Terpolymer Peroxide cured. It is a high
performance EPDM compound. This compound has most certificates for contact
with potable water.
2. Product Description
Chemical Composition : Ethylene / Propylene / Diene Terpolymer
Physical form : Mouldings
Colour : Black
Odour : None
Storage stability * : 10 years
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
15
RUBBER TECHNOLOGY
RUBBER MOULDINGS
G e n u i n e Vi t o n ® 7 0 G LT- c o m p o u n d 5 1 4 1 1 5 - Te c h n i c a l D a t a S h e e t
1. Introduction
Original Viton® GLT 514115-compound is based on 100% Genuine Viton® GLT.
Products out of this compound are being made according to strict guidelines of
®
DuPont Performance Elastomers. This guarantees a constant high quality level. All
products carry the specific, easy recognizable emblem on their package.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
16
RUBBER TECHNOLOGY
RUBBER MOULDINGS
G e n u i n e Vi t o n ® 7 0 - c o m p o u n d 5 1 4 6 7 0 - Te c h n i c a l D a t a S h e e t
1. Introduction
Original Viton® 514670-compound is based on a 100% Genuine Viton® polymer.
Products out of this compound are being made according to strict guidelines of
DuPont Performance Elasomers. This guarantees a constant high quality level.
®
All products carry the specific, easy recognizable emblem on their package.
In conformity with FDA 177.2600.
2. Product Description
Chemical Composition : Dipolymer of Hexa-Fluoropropylene and Vinylidene Fluoride,
plus cure chemicals with 66% Fluorine
Physical form : Mouldings
Colour : Black
Odour : None
Solubility : Low molecular weight Esters and Ketones
Storage stability * : Excellent
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
17
RUBBER TECHNOLOGY
RUBBER MOULDINGS
G e n u i n e Vi t o n ® 7 5 - c o m p o u n d 5 1 4 1 4 - Te c h n i c a l D a t a S h e e t
1. Introduction
Original Viton® 51414-compound is based on a 100% Genuine Viton® polymer.
Products out of this compound are being made according to strict guidelines of
®
DuPont Performance Elasomers. This guarantees a constant high quality level.
All products carry the specific, easy recognizable emblem on their package. ERIKS
standard original Viton® compound for mouldings.
2. Product Description
Chemical Composition : Copolymer of Hexa-Fluoropropylene and Vinylidene Fluoride,
plus cure chemicals
Physical form : Mouldings
Colour : Black
Odour : None
Solubility : Low molecular weight esters and ketones
Storage stability * : Excellent
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
18
RUBBER TECHNOLOGY
RUBBER MOULDINGS
G e n u i n e Vi t o n ® 7 5 - c o m p o u n d 5 1 4 1 4 g re e n - Te c h n i c a l D a t a S h e e t
1. Introduction
Original Viton® 51414 green-compound is based on a 100% Genuine Viton® poly-
mer. Products out of this compound are being made according to strict guidelines
of DuPont Performance Elasomers. This guarantees a constant high quality level.
®
All products carry the specific, easy recognizable emblem on their package.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
19
RUBBER TECHNOLOGY
RUBBER MOULDINGS
1. Introduction
Original Viton® GF 514141-compound is a polymer with 70% Fluorine content.
Cure system is Peroxide.
®
2. Product Description
Chemical Composition : Terpolymer with 70% Fluorine, Peroxide cured
Physical form : Mouldings
Colour : Black
Odour : None
Storage stability * : Excellent
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
20
RUBBER TECHNOLOGY
RUBBER MOULDINGS
G e n u i n e Vi t o n ® 7 5 G F LT- c o m p o u n d 5 1 4 7 1 2 - Te c h n i c a l D a t a S h e e t
1. Introduction
Original Viton® GFLT 514712-compound is based on 100% Genuine Viton® GFLT.
Products out of this compound are being made according to strict guidelines of
®
DuPont Performance Elastomers. This guarantees a constant high quality level.
All products carry the specific, easy recognizable emblem on their package.
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
21
RUBBER TECHNOLOGY
RUBBER MOULDINGS
G e n u i n e V i t o n ® 7 5 S C V B R - c o m p o u n d S e m i c o n - Te c h n i c a l D a t a S h e e t
1. Introduction
Original Viton® SVCBR-compound is a Genuine Viton® FKM-compound. Products
out of this compound are being made according to strict guidelines of DuPont
Performance Elastomers. This guarantees a constant high quality level. All products
®
carry the specific, easy recognizable emblem on their package.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
22
RUBBER TECHNOLOGY
RUBBER MOULDINGS
G e n u i n e Vi t o n ® 8 0 E T P E x t re m e 5 1 4 0 1 6 - Te c h n i c a l D a t a S h e e t
1. Introduction
Original Viton® 80 ETP Extreme 514016 is a specially formulated fluorpolymer for
paint spray industries. Products out of this compound are being made according
to strict guidelines of DuPont Performance Elastomers. This guarantees a constant
®
high quality level. All products carry the specific, easy recognizable emblem on their
package.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
23
RUBBER TECHNOLOGY
RUBBER MOULDINGS
G e n u i n e Vi t o n ® 8 0 - c o m p o u n d 5 1 4 6 8 0 - Te c h n i c a l D a t a S h e e t
1. Introduction
Original Viton® 514680-compound is based on a 100% Genuine Viton® polymer. Products
out of this compound are being made according to strict guidelines of DuPont Performance
Elasomers. This guarantees a constant high quality level. All products carry the specific,
®
easy recognizable emblem on their package. In conformity with FDA 177.2600.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
24
RUBBER TECHNOLOGY
RUBBER MOULDINGS
G e n u i n e Vi t o n ® - c o m p o u n d 5 1 4 3 2 0 - Te c h n i c a l D a t a S h e e t
1. Introduction
Original Viton® 514320-compound is based on a 100% Genuine Viton® polymer.
Products out of this compound are being made according to strict guidelines of
DuPont Performance Elasomers. This guarantees a constant high quality level. All
®
products carry the specific, easy recognizable emblem on their package.
2. Product Description
Chemical Composition : Copolymer of Hexa-Fluoropropylene and Vinylidene Fluoride,
plus cure chemicals
Physical form : Mouldings
Colour : Black
Odour : None
Solubility : Low molecular weight Esters and Ketones
Storage stability * : Excellent
3. Physical Properties
5. Chemical Resistance
Concentrated acids : excellent 7. Safety and Handling
Acetone : bad Read and be guided by the
Hydroxides : excellent recommendations in the DuPont
Benzene : excellent Performance Elastomers techni-
Crude oil : excellent cal bulletin H-71129-02, ‘Handling
Toluene : excellent Precautions for Viton® and Related
Fuel C : excellent Chemicals’.
Gasoline : very good
BTM oil 3 : excellent
Methylene chloride : very good 8. Other Information
MEK : bad • Can be formulated to meet FDA
MTBE : bad 177.2600 compliance,
Water < 100°C : very good Mil-R-83248B and AMS7276D
Steam > 120°C : bad
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
25
RUBBER TECHNOLOGY
RUBBER MOULDINGS
F K M 7 5 - c o m p o u n d 5 1 4 6 7 6 - Te c h n i c a l D a t a S h e e t
1. Introduction
FKM 514676 is a copolymer formulated in compliance with FDA 177.2600 and USP
class VI regulations.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
26
RUBBER TECHNOLOGY
RUBBER MOULDINGS
V M Q S i l i c o n e 7 1 4 7 4 2 - Te c h n i c a l D a t a S h e e t
1. Introduction
Silicone compound 714742 is in compliance with FDA 177.2600 for food and
pharma. Peroxide cured.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
27
RUBBER TECHNOLOGY
RUBBER MOULDINGS
V M Q S i l i c o n e 7 1 4 7 6 2 - Te c h n i c a l D a t a S h e e t
1. Introduction
Silicone compound 714762 is in compliance with FDA 177.2600 for food and
pharma. Peroxide cured.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
28
RUBBER TECHNOLOGY
RUBBER MOULDINGS
V M Q S i l i c o n e S T- E C - 6 0 - 0 0 1 - Te c h n i c a l D a t a S h e e t
1. Introduction
Silicone compound ST-EC-60-001 is in compliance with FDA 177.2600, USP VI and
BGVV for food, pharma and medical applications. Peroxide cured. Standard cord
quality compound.
2. Product Description
3. Physical Properties
7. Other Information
• Tolerances in compliance with ISO
3302-1E2 / DIN 7715 E2
• Other colours on demand
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
29
RUBBER TECHNOLOGY
RUBBER MOULDINGS
V M Q - S i l i c o n e c o m p o u n d 7 1 4 1 7 7 - Te c h n i c a l D a t a S h e e t
1. Introduction
Silicone compound 714177 is a general purpose silicone with excellent physical and
temperature resistance up to 220°C. Standard compound for mouldings.
2. Product Description
Chemical Composition : Silicone Rubber having both Methyl and Vinyl groups on the
Polymer Chains
Physical form : Mouldings
Colour : Red
Odour : None
Storage stability * : 10 years
3. Physical Properties
5. Chemical Resistance
Air : excellent 7. Other Information
Alcohol : satisfacory • AS dimensions are available in FDA
Hydrocarbons : unsatisfactory 177.2600 compliant quality (class 1).
Fats : good • Other colours on demand.
Vegetable oils : good • Platinum cured USP class VI on
Silicone oils : good demand.
Ethers/esters : unsatisfactory
Acids : good
Steam : poor at high
temperatures;
OK up to 130°C
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
30
RUBBER TECHNOLOGY
RUBBER MOULDINGS
V M Q - S i l i c o n e c o m p o u n d 7 1 4 0 0 2 - Te c h n i c a l D a t a S h e e t
1. Introduction
Peroxide cured, translucent silicone rubber, 714002. Silicone rubber having both
Methyl and Vinyl substituent groups on the polymer chain. Silicone compound from
GE BAYER in conformity with USP XXIII class VI. Formulated using only those ingre-
dients authorised by BGVV XVA and FDA CFR21 Section 177.2600. Also KTW and
WRAS approved.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
31
RUBBER TECHNOLOGY
RUBBER MOULDINGS
V M Q S i l i c o n e 7 1 4 7 8 7 - Te c h n i c a l D a t a S h e e t
1. Introduction
Silicone compound 714787 is in compliance with FDA 177.2600 for food and
pharma. Peroxide cured.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
32
RUBBER TECHNOLOGY
RUBBER MOULDINGS
FVMQ Silicone 80 6 1 4 0 1 0 b l u e - Te c h n i c a l D a t a S h e e t
1. Introduction
Silicone compound 614010 blue is a low compression set Fluorsilicone moulding
material with good chemical and fysical resistance at high temperatures up to
220°C, short term even up to 280°C.
2. Product Description
3. Physical Properties
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples. 01.02.2006
01.04.2006
33