AFNOR NF Cu-b2 NF A51-050 is a copper alloy with a minimum copper content of 99.9% and maximum phosphorus content between 0.004-0.012%. It has mechanical properties including a minimum yield strength of 637 MPa, minimum tensile strength of 936 MPa, and minimum impact strength of 22J. The alloy is commonly used in buildings, infrastructure, tools, ships, automobiles and machines due to its high strength and low cost.
AFNOR NF Cu-b2 NF A51-050 is a copper alloy with a minimum copper content of 99.9% and maximum phosphorus content between 0.004-0.012%. It has mechanical properties including a minimum yield strength of 637 MPa, minimum tensile strength of 936 MPa, and minimum impact strength of 22J. The alloy is commonly used in buildings, infrastructure, tools, ships, automobiles and machines due to its high strength and low cost.
AFNOR NF Cu-b2 NF A51-050 is a copper alloy with a minimum copper content of 99.9% and maximum phosphorus content between 0.004-0.012%. It has mechanical properties including a minimum yield strength of 637 MPa, minimum tensile strength of 936 MPa, and minimum impact strength of 22J. The alloy is commonly used in buildings, infrastructure, tools, ships, automobiles and machines due to its high strength and low cost.
Application: Copper and alloys. Classification of coppers.
Heat treated: 1585°C - 1524°C.
AFNOR NF Cu-B2 NF A51-050 Chemical
AFNOR NF Cu-b2 NF A51-050 is an alloy of iron and carbon and other elements. Because of its high tensile strength and low cost, it is a major component used in buildings, infrastructure, tools, ships, automobiles, machines, appliances. The AFNOR NF Cu-b2 NF A51-050 chemical composition determined by ladle analysis shall comply with the specified values of the following table.
Element Min Max
P 0.0040 0.0120 - Cu 99.9000 - - AFNOR NF Cu-B2 NF A51-050 Mechanical What is the chemical composition of AFNOR NF Cu-b2 NF A51-050 steel? For AFNOR NF Cu-b2 NF A51-050 Hardness, AFNOR NF Cu-b2 NF A51-050 steel tensile strength, yield strength,elongation, please see the following table.
Impact Elongatio Reduction in cross
Yield Tensile KV/Ku n section on fracture As-Heat-Treated Condition Rp0.2 (MPa) Rm (MPa) (J) A (%) Z (%) Solution and Aging, Annealing, 637 (≥) 936 (≥) 22 42 22 Ausaging, Q+T,etc AFNOR NF Cu-B2 NF A51-050 Physical Basic Physical Properties of AFNOR NF Cu-b2 NF A51-050 Steel
Mean coefficient of Specific Specific
Temperatur Modulus of Thermal Den thermal expansion 10- thermal electrical e elasticity conductivity (kg 6/(°C) between 20(°C) capacity resistivity (°C) (GPa) (W/m·°C) and (J/kg·°C) (Ω mm²/m) 43 - - 0.32 - 546 838 - 14.3 344 - 719 - 32 32.2 311 AFNOR NF Cu-B2 NF A51-050 Equivalent
Grade Standard Area Content
NF A51- Cu-a1 France Copper and alloys. Classification of coppers 050 Grade Standard Area Content NF A51- Cu-b1 France Copper and alloys. Classification of coppers 050 NF A51- Cu-a2 France Copper and alloys. Classification of coppers 050 NF A51- Cu-c2 France Copper and alloys. Classification of coppers 050 NF A51- Cu-c1 France Copper and alloys. Classification of coppers 050 NF A51- Cu-b2 France Copper and alloys. Classification of coppers 050 NF A51- Cu-a3 France Copper and alloys. Classification of coppers 050