Professional Documents
Culture Documents
WATER TECHNOLOGY and WATER TREATMENT COO PDF
WATER TECHNOLOGY and WATER TREATMENT COO PDF
WATER
based on specialty chemicals, and this
invaluable handbook contains
TECHNOLOGY &
information on chemical formulations and
programming, considered “taboo” and
WATER TREATMENT
never published before.
FIREWORKS
TECHNOLOGY
COOLING TOWER
PERFORMANCE
DONALD R. BAKER
452 pages, Illustrations
Hardcover
$ 90.00
£ 55.00
ISBN 0-8206-0300-7
HANDBOOK OF PYROTECHNICS
KARL O. BRAUER
416 pages, Illustrations
Paperback
$ 75.00
£ 45.00 HARRY’S COSMETICOLOGY,
ISBN 0-8206-0349-X 8th Edition
Now a 2 Volume Set
This handbook provides extremely useful DR. MARTIN M. RIEGER,
data and information about theory and Editor-in-Chief
industrial applications that formerly were 996 total pages, 2nd Impression 2009
limited to applications in military Hardcover
ordnance, fireworks, and rock blasting.
These “civilian” applications include ISBN 978-0-8206-0000-0 (Vol 1)
spacecraft, aircraft, underwater vehicle Volume 1 $ 195.00
systems, metal forming, cladding, riveting Volume 1 £ 118.00
and some other production methods.
Twenty-one chapters contained in six ISBN 978-0-8206-0001-7 (Vol 2)
parts: Explosive Materials, Explosive- Volume 2 $ 195.00
Actuated Devices, Pyrotechnic Systems, Volume 2 £ 118.00
Reliability and Testing, Explosive
Production Methods and Appendix. ISBN 978-0-8206-0002-4 (2 Vol Set)
Contains numerous charts, graphs and Set $ 390.00
illustrations as useful aids. Set £ 236.00
TECHNOLOGY
Rotary Kilns; Chain Systems Designs;
Cooler Air Balance Technical
& ENGINEERING
Investigation of Grinding Circuits; Ball
Charges; Grinding Aid Solutions; Useful
Formulas in Stearn Engineering Electrical
Engineering; Fan Engineering; Fluid Flow;
Physical Chemistry; Heat Transfer and
Dust Collection; Fundamental Formulas
in Algebra; Trigonometry; Statistics;
Finances; Safety and Geometry;
Conversion Factors for all Units.
CEMENT MANUFACTURER’S
HANDBOOK
KURT E. PERAY
408 pages
Paperback
$ 75.00
£ 45.00 THE ROTARY CEMENT KILN
ISBN 0-8206-0368-6 2nd Edition
KURT E. PERAY
This unique handbook contains the most
396 pages, Illustrations
essential engineering formulas used in
Paperback
the cement manufacturing process. All
$ 80.00
formulas are presented in both English
£ 48.00
and metric systems of units. Examples are
ISBN 0-8206-0367-8
given to familiarize the reader with the
usefulness of these formulas. The book
This is an indispensable reference source
can be used as a text manual for courses
and training tool not only for kiln
in cement technology, and as a reference
operators, but for supervisors and
for solving operating problems. The book
management staff as well. Extensive
is equally valuable for the manager
discussions on pre-heater and pre-calciner
supervisor, chemist, and operator as it is
operations are included. The appendix
to the cement plant engineer.
includes a section with conversion tables,
definitions of common terms relating to
CONTENTS: Cement Chemistry and
rotary kilns, and a suggested outline for a
Quality Control; Kiln Feed Mix
training program for new operators.
Calculations; Chemical and Physical
Properties of Materials; Technical
CONTENTS: History; Types of Rotary
Investigations of Kiln Performance; Heat
Kilns; Refractories; Fuels; Combustion;
The Flame; Heat Transfer; Heat Balances; their manufacture and use. It will be of
The Chemistry of Kiln Feed and Clinker, great interest not only to the chemist
Reaction Zones in the Rotary Kiln; involved in the science and technology of
Coating and Ring Formation in a Rotary silicate materials but also to those using
Kiln; The Air Circuit in a Rotary Kiln: concrete in building and civil engineering
Movement of the Material Through The construction. Attention is given to
Kiln; Kiln Operating and Control problems arising in the use of concrete,
Methods; Instrumentation; Burning Zone from the suitability of materials, to the
Control; Fuel Systems; Clinker cooler conditions under which concrete may
Control; Kiln Exit-Gas Temperature deteriorate and the precautionary or
Control; Feed-Rate Control; Kiln Starts remedial measures that can be adopted. It
and Shutdowns; The 27 Basic Kiln is well illustrated with line drawings,
Conditions; Kiln Emergency Conditions; tables and photographs.
Safety and Accident Prevention;
Appendix: A KILN OPERATOR’S QUIZ; PARTIAL CONTENTS: History of
Glossary; Conversion Tables; Index. calcareous cements; Classification of
cements; Portland cements: Raw materials
and manufacturing processes; Cement
components and their phase relations;
Cementing qualities of the cement
compounds; Constitution, burning,
proportioning, hydration and setting and
hardening of Portland cement; Structure
of cement compounds; Action of acid and
sulphate waters of Portland Cement;
Physical and mechanical properties of
Portland Cement, Pozzolanas and
F. M. LEA’S Pozzolanic cements; Cements made from
blast furnace slag; High Alumina cement,
CHEMISTRY OF CEMENT AND some special cements and cement
CONCRETE 3rd Edition. properties; Concrete aggregates;
F.M. LEA Resistance of Concrete to various organic
740 pages, Illustrations and inorganic agents; Examination of
Hardcover concrete failures.
$ 115.00
£ 69.00
ISBN: 978-0-8206-0212-7
Hausner’s handbook covers the entire This book of formulas is a tool for anyone
field of powder metallurgy with its who must turn out quality paints without
various branches and refinements, while finance to develop and test completely
at the same time remaining within the new, untested prototypes. Most of the
bounds of manageable size and formulas are starting point preparations
readability. It is a concise presentation that do require refining. The chapters are
concentrating on graphical presentations built on: Use (primer, enamel, ext./int.
and tables to explain basic relationships paint, luminescent, etc.) Special
between the principles and technology of Characteristics, Vehicle (oil, alkaloid,
powder metallurgy. This book is a epoxy, etc.) and Color.
valuable guide not only for students and
teachers but also for the practical powder
metallurgists involved in research,
development and production of P/M parts
and compounds.
CONTENTS: Principles of; Powder
Mixing; Sintering of Metal Powders;
Alloy Formation by Powder Metallurgy;
Hot Pressing; Powder Metallurgy of Iron
and Iron Alloys, Copper and Copper
Alloys, Light Metals and Refractory
Metals; Electrical Applications; Porous
Metals.
A FORMULARY OF ADHESIVES A FORMULARY OF DETERGENTS
AND SEALANTS AND OTHER CLEANING
Ed. M & I ASH AGENTS
412 pages Ed. M & I ASH
Paperback 360 pages
$ 65.00 Paperback
£ 39.00 $ 65.00
ISBN: 0-8206-0366-X £ 39.00
ISBN: 0-8206-0369-4
This collection of formulas covers a wide
range of applications in adhesive This is a collection of formulas devoted
technology. The major industries entirely to products that serve as cleaning
involved in the manufacture of adhesive agents for personal hygiene, household
ingredients have contributed uses, and industrial maintenance. All
experimental and starting-point formulas are systematically presented first
formulations to this work. All the by application and then classified by their
formulas are categorized into chapters chemical constituents. The formulas
according to their principal applications. include instructions for preparation.
The formulas are then divided into Because of the broad spectrum of cleaning
sections based on their chemical agents included in the book it will be
constituents. Instruction for preparation valuable to both the industrial and home
are included. chemists with formulas geared to the
professional and the hobbyist.
PARTIAL CONTENTS: Hot-Melt
Adhesives; Pressure-Sensitive Adhesives; PARTIAL CONTENTS: Hygienic
Construction Adhesives; Laminating Cleansers; Solvent Cleaners; Industrial
Adhesives; Furniture and Appliance Floor Cleaners; General Industrial
Adhesives; Foam Rubber Adhesives; Cleaners and Detergents; Household
Wood and Plastic Assembly Adhesives; Cleaners; Dry Cleaning Agents;
Newspaper and Printing Adhesives; Miscellaneous.
Sealants; Binders; Caulks.
ENGINEERS’ ILLUSTRATED METRIC CONVERSION
THESAURUS HANDBOOK
HERBERT HERKIMER M.H. GREEN
592 pages, Illustrations 236 pages
Paperback Paperback
$100.00 $ 45.00
£ 60.00 £ 27.00
ISBN: 0-8206-0379-1 ISBN 0-8206-0351-1
HANDBOOK OF LABORATORY
SOLUTIONS
M.H. GABB, W.E. LATCHAM
128 pages
Paperback
$ 55.00
£ 33.00
THE CHEMICAL ANALYSIS OF ISBN 0-8206-0365-1
ELECTROPLATING SOLUTIONS
TERRANCE H. IRVINE A concise and handy guide to the
192 pages, Illustrations numerous “recipes” for chemical
Paperback solutions used in laboratories. In each
$ 60.00 chapter, preparations of one particular
£ 36.00 use, or related uses, are grouped
ISBN 0-8206-380-5 alphabetically. Where appropriate, the
use of the solutions are stated and cross
A unique text/reference which gives the reference made. Should meet most of the
procedures for all analysis needed to everyday requirements of chemistry,
control any phase of electroplating. All physics, biology and engineering
theories behind these analyses are laboratories.
explained in detail. Better analytical
technique and therefore better product, CONTENTS; Solutions-Basic Definitions;
will result from the thorough Solutions-Handling Techniques;
understanding of the chemistry involved. Solutions for Titrations; Bench Solutions;
Indicators; Organic Reagents; Solutions in
PARTIAL CONTENTS: Analytical Histology; Physiological Salines and
Techniques; VI-B Group-Chromium Culture Solutions; Miscellaneous
Solutions; VII-B Group; VIII Group-Iron; Solutions.
Rhodium; Nickel; Palladium; Platinum
Solutions; I-B Group-Copper; Silver; Gold
Solutions; II-B Group-Zinc; Cadmium
Solutions III-A Group-Indium Solutions;
I V-A Group-Tin Lead Solutions; V-A
Group-Arsenic; Antimony Solutions;
Alloy Plating Baths; Analytical
Instrumentation.
updated chapters on PROCESSING
(Compression and Transfer Molding,
Extrusion, Injection Molding and Blow
Molding, Thermoforming, Powder
Coating, Miscellaneous Processing
Techniques) take account of developments
in Powder Coating, Coextrusion, Injection
and Blow Molding, Solid Phase Pressure
Forming, and Theroforming (including
blister and skin packaging). The
POLYMER TECHNOLOGY,
TESTING Chapter (Physical and
3rd Edition Chemical Testing of Plastics) as well as
D.C. MILES, J.H. BRISTON the APPLICATION aspects are updated
728 pages, Illustrations and expanded to include Water Vapor.
Hardcover The section on Optical Tests has also been
$ 171.00 updated and enlarged.
£ 103.00
ISBN 0-8206-0344-9
This is a practical, quick reference guide The second edition of this popular
for those who are actively involved in formulary contains the entire spectrum of
protecting the health of the worker. It is confectionery and chocolate products.
organized for rapid access, clarity and New formulas as well as formulas for
conciseness. Contents refer to various low-calorie candy have been added to
chemicals, drugs, insecticides and other reflect consumers’ changing preferences.
compounds. The entries are listed by Additional chapters deal with Hazard
their most familiar names from ABRIN to Analysis Critical Control Point (HACCP),
ZIRCONIUM. Each entry contains all the U.S. Labeling Laws, Storage and Color
data that the seeker needs to know- Addition. Formulas are presented in a
synonyms, all aspects of toxicity. clear and precise manner, including the
Threshold Limit Values, tests, treatment, ingredients for their manufacture and the
and precautions to be observed. The step-by-step procedure.
appendix contains an extensive Mr. Harris is a former U.S. Army Natick
bibliography. Research at the Development &
Engineering Center. Mr. Crespo is a Vice
President-Technical Emeritus for Wilbur
Chocolate Co.
SPICES,
2 Volumes
J. W. PARRY
232 pages (Vol 1)
256 pages (Vol 2)
Paperback
$ 45.00 each Volume
MODERN DAIRY PRODUCTS 3rd £ 27.00 each Volume
Edition ISBN 0-8206-0350-3 (Vol 1)
LINCOLN M. LAMPERT ISBN 0-8206-0378-3 (Vol 2)
448 pages
Paperback These books are a excellent reference
$ 65.00 source for those who need to understand
£ 39.00 spices. Vol. I covers the history of spices
ISBN 0-8206-0360-0 from ancient times to the modern world,
description of spices, as well as an outline
This book presents reliable information, of trends in the spice industry. An
in a non-technical manner, on the Appendix, in alphabetical order, details
composition, nutritive value, the origins and nature of the spices
manufacture, chemistry, and bacteriology described and additional information on
of milk and dairy products. The book essential oils of the spices. Glossary.
introduces the reader to the broad aspects Vol. II describes the morphology and
of the dairy industry and the possibilities histology of spices as well as their
of bringing in new techniques. chemical composition.