Professional Documents
Culture Documents
Onduline Ploče Postavljane
Onduline Ploče Postavljane
[Nominal]
Sheet Size:- 2.000 x 0.950m
Weight:- 6.4kg
Corrugation size:- 9.5 x 3.8cm
Thickness:- 3mm
12.5cm Colours:- (PP Prepigmented) Black, Green, Red, Brown.
Fixing Guide
(PF Painted Finish) Slate.
Note: take care to fix Black Onduline sheets the correct way up.
The underside is easily identified by its dappled surface finish.
12. RIDGE UNIT FIXING 13. HIP DETAIL 14. VERGE FIXING 15. VERGE FIXING Ridge
Battens/Purlins
Rafters
Start fixing the ridge at the opposite Fix hips before ridge. Lay support Fasten timber barge board level with Alternatively, fix barge board level
end of the roof from prevailing winds, boards and trimming purlins. Nail the top of finished Onduline roof. The with the underside of the Onduline Verge
and form a 12.5cm overlap. Use a ridge units to trimming purlins, cut Onduline verge units are then overlaid corrugation and overhang corruga-
string line to align, and nail at every and dress units and overlay with and nailed into position. tion. Fold down and nail in position.
corrugation. ridges.
“No other roofing
material is so
Eaves
easy to
Fascia board handle and
CAUTION
Covering of roofs can be a hazardous operation. All works should so simple
be carried out with due regard to health and safety regulations.
to fix.”
MAINTENANCE
To ensure long life the roof should be cleared of leaves and
16. SIDE WALL ABUTMENT 17. ABUTMENT FLASHING 18. ROOF LIGHTS 19. ROOF WINDOW debris and gutters cleaned regularly.
Form side wall flashing to Onduline Use Onduline pre-formed apron Onduline PVC roof lights are easily Provides illumination and ventilation
roof, using Onduline flashing tape flashing to seal end wall abutments. fixed for natural illumination. They but does not reduce the thermal insu-
Use separate cover flashing to the require pre-drilling before nailing into lation performance of the roof. Cut
ONDULINE SYSTEMS PRODUCTS & ACCESSORIES
or similar, and fix separate cover
flashing to the wall. wall to allow for movement. position. opening in sheet and nail in position.
In a leaflet of this size it is not possible to include full details of
all our products, but comprehensive literature is available giving
full details of the range of Onduline products, and conditions of
use. The Technical Sales department will be pleased to supply
you with copies, or assist you in specific enquiries.
7.5cm
NF ISO 9002
Onduline International S.A. ONDULINE PRODUCTION SARL
FRANCE
20. ROOF VENTILATOR 21. ONDULINE VALLEY 22. CURVED ROOF DETAIL 23. ONDULINE TILE EFFECT Tel: (33) 1 53 81 95 10 Certificate No 40381
Issued 26 April 1997
Roof ventilators are available in two LINING UNITS Use full Onduline sheet at ridge fixed Cutting Onduline sheets into 50cm Fax: (33) 1 44 09 81 48/1 44 09 85 03
sizes to provide increased ventilation. Fix valley boards / trimming purlins on purlins at 42.5cm centres with lengths and fixing with a 20cm over- Website: http://www.onduline.com
BBA
BRITISH
Simply cut opening in sheet and nail 30cm sheet end lap and double lap easily creates a pleasing tile
BBA
BRITISH
and line with either Onduline, metal, or E-mail: export@onduline.com BOARD OF BOARD OF
in position. GRP preformed liner units. The vertical corrugation side lap. The purlin effect shadow line.
AGREMENT
CERTIFICATE NO. 87 / 1823 / C
AGREMENT
10,000/TW/1098 CERTIFICATE NO. 87 / 1823 / C
valley depth should be 7.5cm. centres on side walls revert to 61cm.
Introduction ROOF SUPPORT STRUCTURES
91
01
Onduline is easy to handle and so simple to fix. The design
guide sets out the correct fixing method, and illustrates how
It is essential that the correct support be given to
Onduline sheets. Use these tables to avoid problems. First
establish the roof pitch. You can then check if a decking is
Fixing 1
56
7
8
1
Guide
Onduline accessories can be used to provide simple solutions required, or at what centres the purlins should be fixed. 2
to your design requirements. 3
Finally note the sheet end and corrugation side lap. 4
ONDULINE MATERIAL COMPOSITION