Professional Documents
Culture Documents
PC H3 50th
PC H3 50th
Instrumentation
Locations Description Channels
Head: 3 Accelerometers in a triaxial array Ax, Ay, Az(HIC)
Up to 15 Accelerometers 5X Ax, Ay, Az Head Rotation
Neck: Six-Axis Upper Neck Load Cell Fx, Fy, Fz, Mx, My, Mz
Six-Axis Lower Neck Load Cell Fx, Fy, Fz, Mx, My, Mz
Clavicle: Biaxial Load Cell (Left and Right) Fx, Fz
Humerus:Four-Axis Load Cell (Left and Right) Fx, Fy, Mx, My
Thorax: 3 Accelerometers in a triaxial array Ax, Ay, Az (Chest Accel)
Chest Displacement Transducer Dx (standard equipment)
Four-Axis Rib/Spine Load Cells Fx, Fy, Fz, My
Five-Axis Thoracic Spine Load Cell Fx, Fy, Fz, Mx, My
Lumbar Spine: Three-Axis Lumbar Spine Load Cell Fx, Fz, My
Pelvis: 3 Accelerometers (or triax pack) Ax, Ay, Az
Submarining Load bolts Fx (3 per side)
Femur: Uniaxial Femur Load Cell Fx (per leg)
or Six-Axis Upper Femur Load Cell Fx, Fy, Fz, Mx, My, Mz (per leg)
Knee: Knee Displacement Dx (per knee)
Lower Legs*: Biaxial Knee Clevis Load Cell Fz (per leg)
Biaxial Upper Tibia Load Cell Mx, My (per leg)
Three-Axis Lower Tibia Load Cell Fy, Fz, Mx (per leg)
Or Biaxial Knee Clevis Load Cell Fz (per leg)
Four-Axis Upper Tibia Load Cell Fx, Fz, Mx, My (per leg)
Four -Axis Lower Tibia Load Cell Fx, Fy, Mx, My (per leg)
Ankle: Five-Axis Load Cell Fx, Fy, Fz, Mx, My, Mz (per leg)
Toe: Toe Load Cell Fz (per foot)
*Special four channel configurations are available in the upper and lower tibia load cells.
Test Equipment External Dimensions
The following FTSS fixtures are required to calibrate and set
up the Hybrid III 50th Percentile Dummy. Dimension In. Tol. +/- mm Tol. +/-
Head TE-100 Head Drop Total Sitting Height 34.8 0.2 883.9 5.1
Neck TE-207 Neck Pendulum Shoulder Pivot Height 20.2 0.3 513.1 7.6
185-0000 Neck CompressionTool H-Point Height 3.4 0.1 86.4 2.5
Thorax TE-325 Thorax Pendulum H-Point from Seat Back 5.4 0.1 137.2 2.5
83-5006-007 Chest Depth Gage Assembly Shoulder Pivot from Backline 3.5 0.2 88.9 5.1
Knee TE-550 Knee Impact/Knee Sheer Test Thigh Clearance 5.8 0.3 147.3 7.6
TE-512-109 Bracket to test Ball Bearing Knee Elbow to Wrist Pivot 11.0 0.3 297.2 7.6
Pelvis 270-0000 Femur Range of Motion Skull Cap to Backline 1.7 0.1 43.2 2.5
187-0000 Lumbar Bracket Tool Shoulder to Elbow 13.3 0.3 337.8 7.6
TE-2505 H-Point Locator Elbow Rest Height 7.9 0.4 200.7 10.2
78051-532 Pelvis Angle Gage Buttock to Knee 23.3 0.5 591.8 12.7
Foot 320-0000 Foot Compression Fixture Popliteal Height 17.4 0.5 442.0 12.7
TE-5000 Eurofoot Fixture Knee Pivot to Floor 19.4 0.3 492.8 7.6
Ex. Dim TE-1000 External Dimensions Seat Buttock Popliteal Lgth. 18.3 0.5 464.8 12.7
Chest Depth 8.7 0.3 221.0 7.6
Assembly Weights Part Lbs. Tol. +/- Kgs. Tol. +/- Foot Length 10.2 0.3 259.1 7.6
Head Assembly 10.0 0.1 4.54 0.05 Foot Width 3.9 0.3 99.1 7.6
Neck Assembly 3.4 0.1 1.54 0.05 Shoulder Width 16.9 0.3 429.3 7.6
Upper Torso 37.9 0.3 17.19 0.36 Hip Width at H-Point 14.3 0.3 363.2 7.6
Lower Torso 50.8 0.3 23.04 0.36 Chest Circumference 38.8 0.6 985.5 15.2
Upper Arm, Left or Right 4.4 0.1 2.0 0.05 Waist Circumference 33.5 0.6 850.9 15.2
Lower Arm/Hand, L or R 5.0 0.2 2.27 0.09 Ref. Location for
Upper Leg, Left or Right 13.2 0.2 5.99 0.09 Chest Circumference 17.0 0.1 431.8 2.5
Lower Legs/Feet, L or R 12.0 0.3 5.44 0.14 Ref. Location for
Total Dummy Weight 171.3 2.6 77.70 1.18 Waist Circumference 9.0 0.1 228.6 2.5
IF-604 Uniaxial Femur Force Load Cell, 350 ohm (one per leg) 2
or
IF-602 Uniaxial Femur Force Load Cell, 120 ohm (one per leg) 2
IF-604 Uniaxial Femur Force Load Cell, 350 ohm (one per leg) 2
or
IF-602 Uniaxial Femur Force Load Cell, 120 ohm (one per leg) 2
IF-157 Free Motion Headform Modified for 12 Accel (7264C and 7267A) 1
IF-205J Six-Axis Upper Neck Load Cell, Wired to SAE J211 Sign Convention, 350 ohm 1
or
IF-206J Six-Axis Upper Neck Load Cell, Wired to SAE J211 Sign Convention, 120 ohm 1
IF-207 Six-Axis Upper Neck Load Cell, Low Capacity, 350 ohm 1
or
IF-208 Six-Axis Upper Neck Load Cell, Low Capacity, 120 ohm 1
IF-256 Four-Axis Upper Neck Load Cell, Low Capacity, 350 ohm 1
or
IF-257 Four-Axis Upper Neck Load Cell, Low Capacity, 120 ohm 1
IF-433 Rib Spine Box Load Cell with (6) Four-Axis Rib Load Cells and (1) Six-Axis
Thoracic Load Cell, 350 ohm 1
IF-443 Four-Axis Rib Load Cell, 350 ohm 6
IF-319 Six-Axis Thoracic Spine Load Cell, 350 ohm 1
IF-447 Four-Axis Spine Box Rib Load Cell Assembly, 350 ohm 1
or
IF-446 Four-Axis Spine Box Rib Load Cell Assembly, 120 ohm 1
IF-501C Strain Gage Load Bolts in the Pelvis (three per side) Unit Price is Set of Six 1
or
IF-502C Strain Gage Load Bolts in the Pelvis (three per side) Unit Price is Set of Six 1
IF-628 Six-Axis Femur Load Cell w/out end caps, 350 ohm 2
or
IF-629 Six-Axis Femur Load Cell w/out end caps, 120 ohm 2
79051-29 Requires one (1) linear potentiometer for knee slider testing on the Hybrid III Adult dummies 1
270-0000-DAS Hip Range of Motion Test Fixture with DAS - 110 volt 1
or
270-0000-DAS-E Hip Range of Motion Test Fixture with DAS - 220 volt 1
- Includes: stepper motor, actuator, control indexer, frame,
load cell, two (2) tilt sensors and mounting hardware for the H3-50th dummy.
Also includes an 8-channel DTS lab data acquisition system (DAS), pc and software.
- Fixture dimensions: 42 in. L x 28 in W x 62 in H
IE-116-33 One (1) Uniaxial 7264C-2000 Accelerometer , Full Bridge, 33' Cable 1
required, but not included
TE-7104 Data Acquisition and Analysis Windows Software for the Hybrid III Fiftieth Male - V2.0 1
The Ball Bearing Knee Slider Assemblies are direct replacements for the standard knee sliders
that are supplied with the complete dummy. They are sold as complete assemblies, which include
knee assemblies, rotary potentiometers, modified knee caps. The sliders are made out of hardened,
high strength steel and natural rubber with chrome steel ball bearings.
The Ball Bearing Knee Slider Assemblies are tested and certified to the same performance
corridors as the standard knee slider assemblies. To calibrate the Ball Bearing Knee Sliders, a New
Load Distribution Bracket (Part Number TE-512-109) is required.
Listed below are the purchasing options for the Ball Bearing Knee Slider Assemblies:
OPTION #1 This option includes the complete inboard and outboard assemblies right
and left, rotary potentiometers and new knee caps.
OPTION #2
79051-KIT-1 Ball Bearing Knee Slider Assemblies 1 pair
79051-KIT-2 Right and Left, less Knee Caps
This options includes the complete inboard and outboard assemblies
right and left and the rotary potentiometers. FTSS will supply a drawing
for the knee cap (79051-22) for customer to modify.
Customer will have the responsibility to modify the knee caps and
test the complete Ball Bearing Knee Slider Assembly.
1039006 Neck Shield (for Airbag Testing, Optional) Low Density Foam Construction 1
ATD-7799 Neck Shield (for Airbag Testing, Optional) High Density Foam Construction 1
with outer skin surface
78051-622 Hybrid III 50th 45 Degree Foot Assembly, Left modified for 1
7264A/B-2000 Accelerometers
78051-623 Hybrid III 50th 45 Degree Foot Assembly, Right modified for 1
7264A/B-2000 Accelerometers
78051-622-EU Hybrid III 50th 45 Degree Foot Assembly, Left modified for 1
7264A/B-2000 Accelerometers - Tested to European Specs
78051-623-EU Hybrid III 50th 45 Degree Foot Assembly, Right modified for 1
7264A/B-2000 Accelerometers - Tested to European Specs
78051-624 Hybrid III 50th 45 Degree Foot Assembly, Left modified for 1
Kyowa ASM-200BA/1KBBV Accelerometers
78051-625 Hybrid III 50th 45 Degree Foot Assembly, Right modified for 1
Kyowa ASM-200BA/1KBBV Accelerometers
78051-624-EU Hybrid III 50th 45 Degree Foot Assembly, Left modified for 1
Kyowa ASM-200BA/1KBBV Accelerometers - tested to European Specs
78051-625-EU Hybrid III 50th 45 Degree Foot Assembly, Right modified for 1
Kyowa ASM-200BA/1KBBV Accelerometers - tested to European Specs
78051-630 Hybrid III 50th 45 Degree Foot Assembly, Left modified for 1
7264-2000 Accelerometers
78051-631 Hybrid III 50th 45 Degree Foot Assembly, Right modified for 1
7264-2000 Accelerometers
78051-630-EU Hybrid III 50th 45 Degree Foot Assembly, Left modified for 1
7264-2000 Accelerometers - Tested to European Specs
78051-631-EU Hybrid III 50th 45 Degree Foot Assembly, Right modified for 1
7264-2000 Accelerometers - Tested to European Specs
78051-632 Hybrid III 50th 45 Degree Foot Assembly, Left modified for 1
7264A/B-2000 Accelerometers
78051-63 Hybrid III 50th 45 Degree Foot Assembly, Right modified for 1
7264A/B-2000 Accelerometers
78051-632-EU Hybrid III 50th 45 Degree Foot Assembly, Left modified for 1
7264A/B-2000 Accelerometers - Tested to European Specs
78051-633-EU Hybrid III 50th 45 Degree Foot Assembly, Right modified for 1
7264A/B-2000 Accelerometers - Tested to European Specs
TE-650-430 ATD Support Bracket to be used on the TE-650 (Specifically for the ATD's) 1
This pelvis is available for use on the Hybrid III 50th Percentile
Dummy.
Endevco
7264-2000 1032011 1032015 1032047 1032059 1032051 1032055 1032313
7264C-2000
Endevco
7264A-2000
7264B-2000 1032108 1032109 1032119 1032120 1032121 1032122 1032314
Endevco
7267A 1032012 1032016 1032048 1032060 1032052 1032056
Endevco
7265AM3
Kyowa
AS-A 1032013 1032017 1032049 1032061 1032053 1032057
Kyowa
AS-HA 1032013 1032017 1032049 1032061 1032053 1032057
Kyowa
AS-HAM 1032013 1032017 1032049 1032061 1032053 1032057
Kyowa
AS-TA
Kyowa
ASM-200BA 1032038 1032039 1032239 1032240 1032241 1032242 1032315
Kyowa
ASM-1KBBV 1032287 1032288 1032268 1032269 1032316
Entran
EGE-73C-50-750 1032010 1032014 1032046 1032058 1032050 1032054
Entran
EGE-73BE0-50-2000 1032011 1032015 1032047 1032059 1032051 1032055
Entran
EGE-73C-750
Entran
EGE-73BM-50-2000
Entran
EGE-73B4-50-2000H 1032108 1032109 1032119 1032120 1032121 1032122
Entran
EGE3-73E0-50-1500 1032012 1032016 1032048 1032060 1032052 1032056
78051-229 78051-220
Cap Skin Skull Cap, Machined
78051-77XB
(4) 78051-94 Skull, 6 Axis Machined Assembly
Screw, SHCS
1/4-20x5/8,
Nylok
78051-228
Head Skin
*Accelerometer Mount
Refer to Accelerometer
Mount Matrix
78051-383X
Structural Replacement
6 Axis Neck Transducer (2) 9000452
78051-339 Screw, SSCP 8-32 x 1/4
Neck Transducer Pivot Pin (4) 9000677
(2) 78051-253 1/4 x 3/8 x 1/16 Stripper Bolt Shim
Nodding Joint Washers
(4) 9000264
Screw, SHCS 1/4-28 x 7/8
*The Complete Head Assembly is supplied with an accelerometer mount kit free of charge. Please specify
the type required when placing order.
78051-322
78051-297 Nodding Joint Neck Bushing
Nodding Joint Assembly
78051-301
Neck Cable
78051-336
Neck Molded, 78051-307
Tested/Certified Upper Neck Bracket
(4) 78051-252
Flat Washer, Neck Bracket
9001260
Washer
(4) 78051-94
78051-64 Screw, SHCS 1/4-20 x 5/8, Nylok
Nut, Hex Jam 1/2-20
*The Complete Upper Torso Assembly is supplied with an accelerometer mount kit free of charge.
Please specify the type required when placing order.
(6) 78051-304
Rib Rear Support
78051-9
(12) 78051-118 Sternum Stop
Screw, BHCS
10-32 x 1/2
78051-RS
Rib Set Complete
(2) 78051-234
Front Rib End
Strip Threaded 78051-232 (2) 78051-356
Sternum Sternum Stop (2) 78051-233
Front End Stiffener Plate
*The Complete Upper Torso Assembly is supplied with an accelerometer mount kit free of charge.
Please specify the type required when placing order.
*The Complete Upper Torso Assembly is supplied with an accelerometer mount kit free of charge.
Please specify the type required when placing order.
01339 78051-235
78051-249 (2) 78051-241 Shoulder
asher
Spring Clavicle Spacer Bumper
78051-249 Washer
Spring Washer 78051-245 78051-93 78051-240 78051-189
78051-200 Stop, 78051-247 Screw, SHCS Clavicle Spring Right
Upper Arm Pivot Shoulder Shoulder Yoke 1/4-20 x 3/8 Stop Clavicle Link
Washer Yoke Pivot Washer
78051-242
78051-246 Stop, Shoulder
78051-199 78051-255 Shoulder Yoke Yoke Pivot
Upper Arm Pivot Upper Arm
Bushing Pivot Bushing
Pivot Nut
*The Complete Upper Torso Assembly is supplied with an accelerometer mount kit free of charge.
Please specify the type required when placing order.
78051-174
Upper Arm Assembly Flesh
78051-126
Screw, SHSS 3/8 x 1-1/2
78051-128
78051-191 Screw, SHSS 1/2 x 1-1/4
Upper Arm Lower 78051-243
Part Weldment Washer, Flat
78051-255 78051-249
Nut, Upper Arm Pivot Washer, Spring
78051-125
78051-204 Screw, SHSS 3/8 x 1
Lower Arm Lower Part Weldment 78051-214
Wrist Pivot Screw
78051-208
Left Hand Assembly
78051-174
Upper Arm Assembly Flesh
78051-200
Upper Arm Elbow Pivot Washer
78051-126
Screw, SHSS 3/8 x 1-1/2
78051-128
78051-191 Screw, SHSS 1/2 x 1-1/4
Upper Arm Lower Part Weldment
78051-243
Washer, Flat
78051-255
Nut, Upper Arm Pivot 78051-249
Washer, Spring
(2) 78051-198
Lower Arm Stop 78051-199
Upper Arm Elbow
Pivot Bushing
78051-194
Lower Arm Assembly Flesh 78051-125
Screw, SHSS 3/8 x 1
78051-204
Lower Arm Lower Part Weldment 78051-214
Wrist Pivot Screw
78051-209
Right Hand Assembly
(2) 78051-64
(2) 78051-65 1/2-20 Hex Jam Nut
1/2-20 Hex Nut
78051-66
(2) 78051-69
Lumbar Spine
Lumbar Cable
(3) 78051-94 78051-53
Screw SHCS 1/4-20 x 5/8, Nylok Lumbar Spine Bracket
(2) 78051-97 (2) 78051-102
Screw SHCS 3/8-16 x 3/4 Nylok Screw, SHCS 3/8-16 x 1-1/4 Nylok
*Accelerometer Mount 78051-52
Refer to Accelerometer Abdominal Insert
Mount Matrix
(2) 78051-259
(4) 9000624 Femur Friction Plunger
Screw, SHCS 10-24 x 1/2 Assembly
78051-60
Pelvis
(6) 78051-95
78051-13
Screw, SHCS 1/4-20 x 3/4, Nylok
Pelvic Instrument Cavity Cover
78051-110
(2) 9000063 Femur & Flange Assembly, Left
Screw, SHSS 5/8 x 1-3/4
78051-111 78051-498-1
78051-498-2 Femur Bumper, Left
Femur & Flange Femur Bumper,
Assembly, Right Right (2) 9000345 (2) 9000345
Screw, BHCS 8-32 x 3/8 Screw, BHCS 8-32 x 3/8
*The Complete Lower Torso and Complete Pelvis Assembly is supplied with an accelerometer mount kit free of
charge. Please specify the type required when placing order.
78051-99
Screw, SHCS 3/8-16 x 1-3/4, Nylok
78051-41 78051-100
Thigh Flesh, Left Screw, SHCS 3/8-16 x 2, Nylok
78051-43
78051-319 Upper Leg Bone Weldment, Left
Load Cell Simulator (4) 79051-17A
Screw, SHCS 8-32 x 1/2 (two on each side)
(8) 9000313
Screw, FHCS 1/4-28 x 3/8 78051-5
79051-66 79051-22 Knee Flesh, Left
Knee Slider Assembly, Left Knee Cap (4) 9000115
78051-27 Screw, SHCS 1/4-
Knee Insert 28 x 1/2
87051-110-C
Left Knee Clevis
78051-73S
Lower Leg Flesh, Left
C-1877-1
Non-instrumented
Tibia, Left
A-1887
Ankle to Leg Attachment
B-1889 Bolt
Ankle Rotation Assembly
78051-610 A-1886
Ankle Bumper (Rubber) Screw, SHSS 1/4 x 3/4
Modified
(7) 9000076
Screw, BHCS 8-32 x 1/2 78051-600
78051-608 45 Degree Foot, Left
Heel Pad Foam
78051-42
78051-99 Right Thigh Flesh
78051-44
Screw, SHCS 3/8-16 x 1-3/4,
Upper Leg Bone Weldment Right
Nylok
78051-100 (8) 9000313
Screw, SHCS 3/8-16 x 2, Nylok Screw, FHCS 1/4 - 28 x 3/8
78051-319 79051-16-2
Load Cell Simulator Right Knee Slider Assembly
(4) 79051-17A 78051-6
Screw, SHCS 8-32 x 1/2 Knee Flesh Right
(two on each side) 79051-22
79051-27 (4) 9000115
Knee Cap
Knee Insert Screw, SHCS 1/4-28 x 1/2
87051-111-C
78051-74s Right Knee Clevis
Lower Leg Flesh Right
C-1877-2
Non-instrumented Tibia,
Right
B-1889
A-1887 Ankle Rotation Assembly
Ankle to Leg Attachment Bolt
(7) 9000076
78051-610
Screw, BHCS 8-32 x 1/2
Ankle Bumper (Rubber)
A-1886
78051-601
Screw, SHSS 1/4 x 3/4
45 Degree Foot Right
Modified 78051-608
Heel Pad Foam
9000022 Washer 4
78051-322 Bushing, Nodding Joint, Neck 1
9000032 Screw, SSCP 4-40 x 3/8 1
9000034 Screw, SSCP 4-40 x 3/16 3
9000017 Screw, FHCS 1/4-20 x 3/4, Nylok 4
78051-339 Pivot Pin, Neck Transducer 1
78051-356 Stop, Sternum 2
78051-366 Transducer Arm Ball 1
78051-377 Pin, Slotted Spring Modified 1
78051-387 Transducer Arm 1
78051-498-1 Femur Bumper, Left 1
78051-498-2 Femur Bumper, Right 1
78051-608 Heel Pad Foam 2
78051-610 Ankle Bumper (Rubber) 2
9000018 Nut, Hex Jam 1/2-20 3
9000057 Nut, Hex 1/2-20 2
78051-85 Torso Flexion Stop, molded 2
78051-9 Stop, Sternum 1
9000041 Screw, SHCS 1/4-20 x 3/8, Nylok 2
9000005 Screw, SHCS 1/4-20 x 5/8, Nylok 15
9000009 Screw, SHCS 1/4-20 x 3/4, Nylok 10
9000059 Screw, SHCS 3/8-16 x 3/4, Nylok 3
9000021 Screw, SHCS 3/8-16 x 1, Nylok 1
9000083 Screw, SHCS 3/8-16 x 1-3/4, Nylok 2
9000516 Screw, SHCS 8-32 x 1/2 12
79051-19 Pin, Potentiometer Shaft 2
79051-30 Screw, SHSS 3/8 x 3/8 Machined 4
79051-32 Washer, Sliding Knee 2
79051-33 Compression Washer 2
79051-34 Rotation Stop Cover 2
79051-35 Rotation Stop Arm 2
9000011 Screw, SSCP 10-32 x 1/4 4
9000041 Screw, SHCS 1/4-20 x 3/8, Nylok 2
9000063 Screw, SHSS 5/8 x 1-3/4 2
9000072 Pin, Dowel 3/16 x 1/2 2
9000073 Screw, SSCP 5/16-18 x 3/8 2
9000076 Screw, BHCS 8-32 x 1/2 14
9000115 Screw, SHCS 1/4-28 x 1/2 8
9000264 Screw, SHCS 1/4 - 28 x 7/8 4
9000313 Screw, FHCS 1/4-28 x 3/8 16
9000345 Screw, BHCS 8-32 x 3/8 4
9000407 Screw, BHCS 1/4-20 x 1/2 1
9000433 Screw, SHCS 5/16-24 x 7/8, Nylok 4
9000452 Screw, SSCP 8-32 x 1/4 2
9000487 Screw, SHCS 10-24 x 3/8 4
9000577 Hex Key Wrench, Ball End Set 1
9000624 Screw, SHCS 10-24 x 1/2 4
9000630 Small Parts Cabinet 18-Drawer Metal 1
9000643 Screw, FHCS 1/4-20 x 5/8, Nylok 3
9000677 Stripper Bolt Shim, 1/4 x 3/8 x 1/16 4
9000765 Soldering Iron Tip 2
9001260 Washer, 1.06 OD x .53 ID x .06 Cad Plate 2
A-1672 Stop Pin Retainer 2
A-1886 Screw, SHSS 1/4 x 3/4 Modified 2
A-1887 Ankle to Leg Attachment Bolt 2
A-1888 Ankle Friction Pad 2