Professional Documents
Culture Documents
Remote Control Manual
Remote Control Manual
Receiver module (KR2202-4 ) * 1pcs ( include Shell )
Remote Control * 5pcs (include battery )
Technical Data: Switch Output:
Input Power:AC 85V-250V NO: normal open
Standby Current:<8.5MA COM: common
RF Frequency: 433M NC: normal close
RF working mode: superheterodyne
Receive sensitivity: > 97 dbm Wire port :
Transmitting distance: More than 15 meters NO: normal open
Decoding mode: MCU software decoding COM: common
Learnable Transmitters: 1-16 transmitters NC: normal close
Support remote type: Learning code (1527)
Switching Modes:
Both Momentary & Toggle
Wiring type:fixed terminal
Switch Output : normally open & normally closed.
Dimension of PCB (L,W,H)
35*30*18mm 1 3/8 * 1 3/16 * 11/16"
HOW TO USE:
On this products details page, there is a demonstration video available.
You can also see the video at this URL:
https://youtu.be/k06q76qthBw
Working Modes explanation:
Momentary Mode:
Push the remote button , the relay activates, release the remote button the relay deactivates.
Toggle Mode:
Push and release the remote button , the relay activates.
Push and release the remote button again and the relay deactivates.
Clearing All Stored Transmitters:
**Note**
After clearing the stored transmitters, all transmitters will need to be relearned by the receiver.
Push the learning button on the receiver 8 times , and the codes will be cleared .
Please note