Professional Documents
Culture Documents
AFPM - Odds and Ends - Review
AFPM - Odds and Ends - Review
1. T F Thermo Gravimetric Analysis (TGA) of flexible graphite materials shows the importance of
utilizing only high-purity graphite in critical, high-temperature refinery applications.
3. List one of the reasons that Mica-based sealing products are ineffective in providing an oxidation
barrier to protect flexible graphite in high-temperature services. _____________________________
__________________________________________________________________________________
7. Briefly, in what way is using too little anti-seize worse than using none at all? _________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
9. The standard finish for exchangers and pipe flange sealing surfaces is __________________.
___________________________________________________________________________________
___________________________________________________________________________________
12. If a nubbin cannot be removed, what gasket style should be used, and why? ________________
___________________________________________________________________________________
13. While the recommended maximum gasket seating stress for KAG gaskets is 40,000-psi, it has been
used effectively at much higher stresses. What is the upper limit supported by field experience?
___________________________________________________________________________
14. State just one of the arguments against the use of Belleville washers on heat exchangers. ______
___________________________________________________________________________________
15. T F High-pressure applications require the use of high-tensile strength gaskets such as KAG
gaskets.