Professional Documents
Culture Documents
Cad-Cut Flock: Application Instructions For
Cad-Cut Flock: Application Instructions For
Cad-Cut Flock: Application Instructions For
2216
International: StahlsInternational.com • 586.772.5551
Canada: Stahls.ca • 800.521.5255
CAD-CUT ® FLOCK
FEED PREHEAT & Recommended Fabrics
MATERIAL— POSITION— Cotton
into cutter Preheat garment for 10 Polyester
so that the seconds, prior to appli- Sublimated Polyester
carrier is on cation. Position weeded
Due to the combination of fabrics, weaves,
the bottom. design on garment. coatings and dyes used in the textile industry,
Place cover sheet over Stahls’ recommends and provides samples
of our materials and medias for testing.
graphic.
Accessories Required
Kraft Paper or Reusable Cover Sheet
EZ Weeder® or Tweezers
Multi-Color Designs
WEED away PEEL COLD— Apply background for 2 seconds, peel
excess material Allow to cool completely COOL, place foreground and heat apply
leaving only before peeling. at 320˚ medium pressure for 12 seconds,
the desired peel COOL.
graphic on the
carrier. Storage
Store flat, in a cool, dry area, away from
direct heat and sunlight.
CUTTER GUIDELINES
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance for
conditions not under manufacturer's control. Before using, please determine the suitability of product for its intended use. The user assumes all
risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such
quantity of the product proved to be defective by manufacturer.
CAD-CUT & Hotronix are trademarks & ® trademarks of trademarks of STAHLS’ with one or more patents or patents pending.
STAHLS’® 2014 - All International Rights Reserved
05/14