Professional Documents
Culture Documents
Iridex Group Plastic S.R.L.: B-Dul Eroilor 6 - 8, Cod 077190, Voluntari, Ilfov E-Mail: Website
Iridex Group Plastic S.R.L.: B-Dul Eroilor 6 - 8, Cod 077190, Voluntari, Ilfov E-Mail: Website
DECLARATIE DE CONFORMITATE
NR. 1251 DATA 23.09.2020
Informatii suplimentare:
Declaratie de Performanta (anexat)
Certificat de conformitate (anexat)
Director Departament
Tudor MARINESCU-FRASINEI
PPC-MCMS-02-IL-03-4, ver. 1
2) Type, batch or serial number or any other element allowing identification of the construction product as
required under Article 11(4):
Geogrid SS30 – Batch number is provided on the product packaging
3) Intended use or uses of the construction product, in accordance with the applicable harmonised
technical specification, as foreseen by the manufacturer:
For use in construction of roads, railways, earthworks, foundations and retaining
structures, erosion control, reservoirs and dams, canals, solid waste disposal and liquid
waste containment.
Intended use: Reinforcement
4) Name, registered trade name or registered trade mark and contact address of the manufacturer as
required under Article 11(5):
Manufactured in Factory A Manufactured in Factory B
Tensar Manufacturing Limited Tensar Geosynthetics (China) Limited
Sett End Road West 289 Checheng Avenue
Shadsworth Business Park Wuhan Economics Development Zone
Blackburn Hanyang District
BB1 2PU Wuhan
United Kingdom China 430056
Tel: +44 (0) 1254 262431 Tel: +86 27 8423 6370
Fax: +44 (0) 1254 266867 Fax: +86 27 8423 6381
E-mail: sales@tensar.co.uk E-mail: marketing@tensar.com.cn
7) Declared performance:
Harmonised Technical
Performance Related Physical Properties of the Geogrid
Specification
Essential characteristic Performance
Product characteristic Unit of Declared Value Tolerance
characteristic
Tensile Strength (EN kN/m MD – 32 CMD -2
ISO 10319) – 32 -2
Elongation at Maximum % MD – 12,1 CMD ± 4,5
Load (EN ISO 10319) – 11,0 ± 2,5
Static Puncture (CBR kN NPD NPD
test) (EN ISO 12236) a EN13249:2016
EN13250:2016
Dynamic Perforation mm NPD NPD EN13251:2016
Resistance (cone drop EN13253:2016
test) (EN ISO 13433) a EN13254:2016
Damage During % Retained Strength EN13255:2016
Installation >90% EN13257:2016
-0
(EN ISO 10722-1) EN13265:2016
Dangerous substances (National Regulations Less than required by national
in force in EU Member States) regulations in EU Member States
Durability Statement (EN 13249, Annex B)
To be covered within 1 month after installation. Predicted to be durable for up to 50 years in
natural soils with 4 ≤ pH ≤ 9 and soil temperatures ≤25°C on the basis of the results of test
method B.4.2 for 56 days.
a
This test is not applicable for geogrids.
8) The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point
7. This declaration of performance is issued under the sole responsibility of the manufacturer in point 4. Signed for
and on behalf of the manufacturer by:
Signature:
Whilst the durability statement made in the table above is the maximum allowed under the constraints of the relevant CE marking
procedures as defined in the appropriate hEN standards and/or EAD, Tensar are confident that no deterioration in properties will occur
for a period in excess of 120 years in soil conditions between pH3 and pH 12 at a temperature of 20°C and would expect no loss of in-
situ performance when stored outdoors for a period of 1 year prior to installation
Ref. IB_Biaxial_Durability Tensar is a registered trade mark
Kiwa
Certificat de conformitate
a controlului productiei in fabrica
0799-CPR-110
In conformitate cu Regulamentul UE 305/ 2011 al Parlamentului European si Consiliului din 9 martie 2011 (Regulamentul
pentru Produse de Constructii sau CPR), acest certificat se aplica materiale de constructii :
Prezentul certificat atesta faptul ca toate prevederile referitoare la evaluarea si verificarea constantei performantei
descrisa in Anexa ZA a standardelor
Acest certificat a fost eliberat prima data pe 22.01.2008 si va ramane valabil atât timp cât standardele
armonizate, produsul in sine, metodele EVCP si nici conditiile de producer in fabrica nu sufera modificari
semnificative, cu exceptia cazului cand este suspendat sau retras de catre organismul notificat de
certificare a controlului productiei in fabrica .
Greven, 06.04.2020
…………………………………..
i.V. Dipl.–ing.Zori Bronstein
- Sef adjunct Organism Certificare -