Professional Documents
Culture Documents
Timken Part Number 47688 - 47623A, Tapered Roller Bearings - TS (Tapered Single) Imperial
Timken Part Number 47688 - 47623A, Tapered Roller Bearings - TS (Tapered Single) Imperial
Timken Part Number 47688 - 47623A, Tapered Roller Bearings - TS (Tapered Single) Imperial
Timken Part Number 47688 - 47623A, Tapered Roller Bearings - TS (Tapered Single)
Imperial
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts:
the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Speci cations | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Speci cations
Series 47600
2.3 Kg
Bearing Weight
5.2 lb
Dimensions
11/3/2019 | Page 2 of 4
83.345 mm
d - Bore
3.2813 in
136.525 mm
D - Cup Outer Diameter
5.3750 in
33.338 mm
B - Cone Width
1.3125 in
44.450 mm
C - Cup Width
1.7500 in
44.453 mm
T - Bearing Width
1.7501 in
Ab - Cage-Cone Frontface 3 mm
Clearance 0.12 in
Aa - Cage-Cone Backface 2 mm
Clearance 0.08 in
-4.3 mm
a - Effective Center Location3
-0.17 in
11/3/2019 | Page 3 of 4
58900 lbf
C0 - Static Radial Rating
262000 N
Factors
K - Factor7 1.44
instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
1.7500
0.12
1.3125
5.3750
3.2813
4.72
4.40
3.82
1.10
-0.17
IMPERIAL UNITS
ISO Factor - e 0.4
ISO Factor - Y 1.48 47688 - 47623A
Bearing Weight 5.2 lb TS BEARING ASSEMBLY
Number of Rollers Per Row 23
Effective Center Location -0.17 inch
K Factor 1.44
Dynamic Radial Rating - C90 12500 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 8640 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 58900 lbf
Dynamic Radial Rating - C1 48100 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY