This study is limited to using specific sensors and components to construct and test a safe-breaker alarm system using an Arduino and PIR sensor with GSM module. It utilizes 4 trials at different distances (1m, 2m, 3m, 4m) to determine the speed of the alarm's response to an intruder's distance and time of detection. The study was conducted from July to August 2019 under supervision and with assistance, testing the system in Jaena Norte, Jamindan, Capiz and computing formulas to quantify the collected speed data.
This study is limited to using specific sensors and components to construct and test a safe-breaker alarm system using an Arduino and PIR sensor with GSM module. It utilizes 4 trials at different distances (1m, 2m, 3m, 4m) to determine the speed of the alarm's response to an intruder's distance and time of detection. The study was conducted from July to August 2019 under supervision and with assistance, testing the system in Jaena Norte, Jamindan, Capiz and computing formulas to quantify the collected speed data.
This study is limited to using specific sensors and components to construct and test a safe-breaker alarm system using an Arduino and PIR sensor with GSM module. It utilizes 4 trials at different distances (1m, 2m, 3m, 4m) to determine the speed of the alarm's response to an intruder's distance and time of detection. The study was conducted from July to August 2019 under supervision and with assistance, testing the system in Jaena Norte, Jamindan, Capiz and computing formulas to quantify the collected speed data.