Professional Documents
Culture Documents
EC I Unit Test 3 RETEST
EC I Unit Test 3 RETEST
PART B (2×12=24)
(ANSWER ALL QUESTIONS “EITHER” OR “TYPE”)
7. a) Using bypass resistor explain in detail about the small signal analysis of common source amplifier . (12) (U)
(OR)
b) Construct BICMOS amplifier and investigate Transconductance, advantages and different types of (12) (C)
BICMOS amplifier.
8 a) Test small signal model of common gate amplifier and find out gain, input and output impedances. (12) AN)
(OR)
b) Sketch the circuit diagram and explain the small signal analysis of source follower Amplifier. (12) (A)
PART C (1×14=14)
(OR)
Evaluate the small signal voltage gain for the voltage divider biased JFET with R 1=420
9. b) KΩ,R2=180 KΩ,RC=2.7 KΩ,RS=2.7 KΩ,RL=4 KΩ,VDD=20V,IDSS=12mA,VP=4V, (14)(AN)
λ =0.008V-1.
Prepared By HOD
[P.MANOJ]
Students will be able to design various biasing circuits for all the
EC8351.1
type of transistors to keep the operating point Stable .
EC8351.2 Students will be able to design and analyze the small signal
equivalent circuits of BJT Amplifiers
EC8351.3 Students will be able to design and analyze the small signal
equivalent circuits of FET Amplifiers
EC8351.4 Students will be able to design and analyze the Frequency
Response of Amplifiers
EC8351.5 Students will be able to design and analyze the different types of
power supplies
EC8351.6 Students will be able to troubleshoot and fault analysis of power
supplies.
Cos / Marks in
EC8351.3 Marks
Level percentage
R 1,3,6 6
20%
U 7a 12
A 2,8b, 14
48%
AN 5,8a,9b 28
E 4 2
32%
C 7b,9a 26
Marks 88