Professional Documents
Culture Documents
Fosroc Data Sheet 350 DIS
Fosroc Data Sheet 350 DIS
Fosroc Data Sheet 350 DIS
Auramix 350 DIS is a high performance super plasticizer Fosroc provides technical advisory service for on-site assis-
suitable for low and high grade concrete and intended for tance and guidance on mix design, optimum dosage evaluation
applications where high water reduction and long workability of trials.
retentions are required.
Properties
Auramix 350 DIS developed to use in:
Appearance : Light Brown Liquid
Long workability retention concrete.
pH : Minimum 6.0
Pumpable Concrete.
Volumetric mass @ 250 C : 1.08 ± 0.02 kg / litre
High performance concrete
Chloride content : Nil to IS:456
Advantages
Alkali content : Typically less than 1.5 g
Low viscosity admixture suitable for pumping different grades
Na 2O equivalent / litre of
of concrete to greater heights.
admixture.
Suitable for concrete having cement replacements and low
Workability Retention : 2 hours and more
water cement ratio.
Depending on Dosage
Provides higher strength without increase in cement content
or reduction in workability. Ideal for precast concrete
production.
Packaging:
as a light brown liquid, instantly dispersible in water.
Auramix 350 DIS is available in 200 kg drums and bulk tankers.
Auramix 350 DIS disperses the cement particles effectively in
Storage
the concrete mix and hence exposes a larger surface area to
the hydration process. This effect is used either to increase Auramix 350 DIS has a minimum shelf life of 12 months pro-
the strength or to produce high workability concrete or reduce vided the temperature is kept within range of 2 0C and 500C.
cement content of concrete or to retard the setting time of
concrete.
page 1 of 2
Auramix 350 DIS
Health and safety instructions Spillages of Auramix 350 DIS should be absorbed onto sand,
earth or vermiculite and transferred to suitable containers.
Remnants should be hosed down with large quantities of water.
of current regulations. However, it should not be swallowed
or allowed to come into contact with skin and eyes. The disposal of excess or waste material should be carried
out in accordance with local legislation under the guidance of
Suitable protective gloves and goggles should be worn.
the local waste regulatory authority.
Splashes on the skin should be removed with water. In case
Additional information
of contact with eyes rinse immediately with plenty of water and
seek medical advice. If swallowed seek medical attention im- The Fosroc range of associated products includes high strength
mediately - do not induce vomiting. cementitious, epoxy grout, polyester resin based mortar for
rapid pre-setting of steel shims to level or for direct bedding
Fire
of small base plates; Resin Anchoring systems for same day
anchoring of bolts in drilled holes in concrete or rock. Also avail-
able a range of products for use in construction; viz., curing
Important note :
Fosroc products are guaranteed against defective materials and manufacture and are sold
subject to its standard terms and conditions of sale, copies of which may be obtained on
or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either
Fosroc Chemicals directly or indirectly arising from the use of its products whether or not in accordance with
(India) Pvt. Ltd.
telephone fax e-mail
“Sapthagiri Palace”, No.38,
II & III Floor, 12th Cross, ++91 80-42521900 ++91 80-23551510 enquiryindia@fosroc.com
CBI Road, Ganganagar North,
Bangalore 560 024
www.fosroc.com
page 2 of 2 INDIA/2017/0142/A