BENCHMARK
; |. 7.010 +3383 —=|
GPmark™ DETAIL Xmark™ DETAIL (80x CONNECTION LENGTH)
See BENCHMARK —
0.063
See Note 2
3.000 Min.
T PRIMARY MAKE-UP SHOULDER =| Pit Free Zone -—
(sal) See Note 6
Bevel da, --
2} (0s ~ } ——" Lh LZ A
See Note 2 7 —
6.469 Hota fae Note
Bevel Dia. SECONDARY MAKE-UP SHOULDER
ECHANICAL STOP
6313 Min 5.698 40.031 Q ) \ 5.122 Ret.
NOTES: Outside Dia. Chore Dia Oyfindrical Dia]
1. Lead tolerance: See Note 4
a. For 2 inches 40.006 inch
b. Recut threads if stretch exceeds 0.006 inch in 2 inches.
2. Either benchmark ‘ype is applicable but not both
a, GPmark: 0.125 is new conion, shall be 0.062 min, after refacing
b. Xmark 0.065 is new contin. Ate rfacng a vise step
on the benchmark shal remain on the primary shoulder.
Rethreading is required if there is no visible Benchmark
3, At Outside Diameter less than 631, Bevel Diameter is void
and 1/32" x 45° becomes effective 1 0" won oe bel
4, Winimam 01. bosed on wal thickness ot countrbore. Larger 0.0 lit x Ret
may be required for spectc grade performance ce Note
5. Surface frsh requirement oly oppies during refacng operation.
6, Area of the connection where iting is not permitted inthe thread roots,
Thread taper 0.750" per ft.
3.5 Threads per inch
Suet 3 5 Bese 4] |Grant Prideco, ji fncrs ue ron XT™ 54. Box
a REFERENCE FIELD INSPECTION DIMENSIONS
By: _| BSaee INFORMATION. ONLY
7 =|= ae TEM. ‘9/6/01 coy se re
Oates KE Liste wel” (ESOT [ro [05