Professional Documents
Culture Documents
Epojet LV - 365 7 2013 PDF
Epojet LV - 365 7 2013 PDF
t
IN COMPLIANCE WITH
EUROPEAN STANDARD
e
EN 1504-5
oj
CONCRETE INJECTION
Ep
Two-component epoxy
resin, with very low
viscosity for injection
in microcracks
• Repair of architectural concrete, wall coverings Epojet LV meets the requirements defined by
and architectural elements that are crumbly. EN 1504-9 (“Products and systems for the
protection and repair of concrete structures -
• Structural consolidation and restoration definitions, requirements, quality control and
of civil and industrial road constructions evaluation of conformity - General principles
and underground works that show signs for the use of products and systems”) and the
minimum requirements claimed by EN 1504-5
of microcracking.
(“Concrete injection”).
• Sealing of cracks in cementitious screeds. RECOMMENDATIONS
• Do not use Epojet LV at temperatures below
• Restoration, by injection, of concrete structures +10°C.
damaged by earthquakes, settlements or
impacts. • Do not apply Epojet LV on wet surfaces.
Ep
its preparation with a suitable pump,
•D
o not use Epojet LV for sealing starting from the lowest tube. Inject
expansion joints. until the resin overflows out of the
next tube. Close the lower tube and
APPLICATION PROCEDURE continue injecting until the entire crack is
Preparation of the substrate completely sealed. Horizontal cracks can
Before injecting Epojet LV, the concrete be sealed simply by pouring Epojet LV
surface must be perfectly solid and clean. directly into the crack.
PRODUCT IDENTITY
component A component B
Setting time:
– at +23°C: 7-8 hours
– at +30°C: 5-6 hours
FINAL PERFORMANCE
Bond due to tensile strength: EN 12618-2 cohesive failure of substrate meets specifications
Bond due to inclined shear strength: EN 13618-3 monolithic failure meets specifications
oje container unguarded until it is completely must ensure beforehand that it is suitable
Ep
empty. for the envisaged application. In every
For further and complete information case, the user alone is fully responsible
about the safe use of our product please for any consequences deriving from the
refer to the latest version of our Material use of the product.
Safety Data Sheet.
Please refer to the current version of
MY(09/2013)
PRODUCT FOR PROFESSIONAL USE. the Technical Data Sheet, available
from our website www.mapei.com
WARNING
Although the technical details and
recommendations contained in this
product data sheet correspond to the
best of our knowledge and experience, All relevant references
all the above information must, in every for the product are available
case, be taken as merely indicative and upon request and from
subject to confirmation after long-term www.mapei.com
practical application; for this reason,