The process path provides the incubated environment for chemical reactions on the Architect i1000SR. It contains a heated circular track that rotates a disk holding reaction vessels every 18 seconds to different locations for liquid handling, mixing, washing, and reading reactions. The path allows various sub-assemblies to access the vessels to perform the steps of the assay sequence and drive the reaction process.
The process path provides the incubated environment for chemical reactions on the Architect i1000SR. It contains a heated circular track that rotates a disk holding reaction vessels every 18 seconds to different locations for liquid handling, mixing, washing, and reading reactions. The path allows various sub-assemblies to access the vessels to perform the steps of the assay sequence and drive the reaction process.
The process path provides the incubated environment for chemical reactions on the Architect i1000SR. It contains a heated circular track that rotates a disk holding reaction vessels every 18 seconds to different locations for liquid handling, mixing, washing, and reading reactions. The path allows various sub-assemblies to access the vessels to perform the steps of the assay sequence and drive the reaction process.
i1000SR Service & Support Manual Revision Log Process Path Proprietary Info 1 General Data Overview How To Use This Manual The Architect i1000SR process path provides i1000SR Module Overview the incubated environment for the reaction Assay Pipetting Protocols process to occur. Reaction vessels containing sample and reagent are held in a disk that sits Card Cage on top of a circular, heated track. This disk CMIA Optics rotates in a counter-clockwise direction, moving one position every 18 seconds. The Fluidics and Vacuum process path provides access points for Liquid Level Sense and Pressu various sub assemblies to perform steps involved in the assay sequence and reaction Power Supply and Distribution process. These include loading the RV into the Process Path path, liquid aspiration and dispense locations, mixing (vortexing) locations, a reaction mixture Reaction Vessel Loader washing location, the optics reading location Reagent Management and unloading the RVs to waste. Robotic Sample Handler Temperature and WAM ARM Overview SCC Overview 2 Troubleshooting Knowledge Management eSolutions Block/Functional Diagrams