Professional Documents
Culture Documents
Diaphragm Design Manual: Fourth Edition
Diaphragm Design Manual: Fourth Edition
s
INSTITUTE
Add a t to equation 6.6-3 on page 6-7 (Section 6 | Alternate Fasteners) as shown below:
and
1.25 inch
Sf = , (Eqn. 6.6-5)
1000 t kip
36 mm
S f = ,
1000 t kN
Where:
t = base steel thickness, inches
Hilti X-ENP-19L15
[Applicable for 1/4 inch and thicker support steel]
and
0.75 inch
s = ,- (Eqn. 6.6-3a)
f 1000.Jt kip
S _ 21.6 } mm
{ r - 1000.ft' ' kN
Where:
t = base steel thickness , inches
{ P01 = 1071(1-
6 _~ 5 J}, kN
Where:
t = base steel thickness, inches
and
S = 1.25 inch
(Eqn. 6.6-5)
t 1ooo.Jt · kip
s _ 36 } mm
{ t - 1000.[t' ' kN
Where:
t = base steel thickness , inches
6-7a