Download as pdf or txt
Download as pdf or txt
You are on page 1of 14

INTRODUCTION ........................................................................................................................................................

FAN CLUTCH INSPECTION ..................................................................................................................................... 4

TROUBLESHOOTING ............................................................................................................................................... 5

FAILURE MODES ..................................................................................................................................................... 8

®
BEARING FAILURE (DriveMaster )..................................................................................................................... 8

®
EXCESSIVE CYCLING (DriveMaster ) ................................................................................................................ 8

FRICTION LINER ISSUES ..................................................................................................................................... 9

HEAT SLIP ............................................................................................................................................................. 9

CONTROLS.......................................................................................................................................................... 10

®
AIR CARTRIDGE (DriveMaster and HT/S) ...................................................................................................... 11

CONTAMINATION ............................................................................................................................................... 11

SEAL or O-RING DAMAGE ................................................................................................................................ 12

®
INCORRECT KIT INSTALLATION (DriveMaster ) ............................................................................................ 12

NON-HORTON PARTS ........................................................................................................................................ 13


 .
BEARING FAILURE (DriveMaster®)

(DriveMaster®)
FRICTION LINER ISSUES

SLIP
AIR CARTRIDGE (DriveMaster® and HT/S)
or O-RING DAMAGE

Check for proper operation to


determine the correct

Cut or nicked seal. Check for proper seal


Possibly due to improper orientation and proper operation
installation or seal to determine the correct
orientation.

INCORRECT KIT INSTALLATION (DriveMaster®)

You might also like