Professional Documents
Culture Documents
Code - Aster: TPLS100 - Infinite Plate Subjected To Antisymmetric Flows
Code - Aster: TPLS100 - Infinite Plate Subjected To Antisymmetric Flows
Code_Aster default
Titre : TPLS100 - Plaque infinie soumise à des flux antisy[...] Date : 12/12/2011 Page : 1/7
Responsable : HAELEWYN Jessica Clé : V4.03.100 Révision :
ec141ab1fe57
Summary:
The purpose of this test is to test the model of thermal hull linear with three fields (MODELING: ‘HULL’ or
‘COQUE_PLAN’) by comparison with an analytical solution, for an infinite plate subjected to a couple of
stationary antisymmetric heat flows on its two half-faces, in stationary mode.
The equation of heat is solved in hover, with a linear, isotropic, homogeneous conduction.
Two modelings: With for the finite elements of surface hull (triangles) and B for the linear elements (segments).
One simultaneously tests in each modeling the elementary orders and the total order THER_LINEAIRE.
Warning : The translation process used on this website is a "Machine Translation". It may be imprecise and inaccurate in whole or in part and is
provided as a convenience.
Copyright 2020 EDF R&D - Licensed under the terms of the GNU FDL (http://www.gnu.org/copyleft/fdl.html)
Version
Code_Aster default
Titre : TPLS100 - Plaque infinie soumise à des flux antisy[...] Date : 12/12/2011 Page : 2/7
Responsable : HAELEWYN Jessica Clé : V4.03.100 Révision :
ec141ab1fe57
1 Problem of reference
1.1 Geometry
z
y
F E D
O x
b
A B C
L
Length: L=20mm
Width: b=2mm
Thickness: h=4mm
Warning : The translation process used on this website is a "Machine Translation". It may be imprecise and inaccurate in whole or in part and is
provided as a convenience.
Copyright 2020 EDF R&D - Licensed under the terms of the GNU FDL (http://www.gnu.org/copyleft/fdl.html)
Version
Code_Aster default
Titre : TPLS100 - Plaque infinie soumise à des flux antisy[...] Date : 12/12/2011 Page : 3/7
Responsable : HAELEWYN Jessica Clé : V4.03.100 Révision :
ec141ab1fe57
2 Reference solution
For more details to refer to the document [R3.11.01] and the note [bib1].
Warning : The translation process used on this website is a "Machine Translation". It may be imprecise and inaccurate in whole or in part and is
provided as a convenience.
Copyright 2020 EDF R&D - Licensed under the terms of the GNU FDL (http://www.gnu.org/copyleft/fdl.html)
Version
Code_Aster default
Titre : TPLS100 - Plaque infinie soumise à des flux antisy[...] Date : 12/12/2011 Page : 4/7
Responsable : HAELEWYN Jessica Clé : V4.03.100 Révision :
ec141ab1fe57
3 Modeling A
3.1 Characteristics of modeling
y
Warning : The translation process used on this website is a "Machine Translation". It may be imprecise and inaccurate in whole or in part and is
provided as a convenience.
Copyright 2020 EDF R&D - Licensed under the terms of the GNU FDL (http://www.gnu.org/copyleft/fdl.html)
Version
Code_Aster default
Titre : TPLS100 - Plaque infinie soumise à des flux antisy[...] Date : 12/12/2011 Page : 6/7
Responsable : HAELEWYN Jessica Clé : V4.03.100 Révision :
ec141ab1fe57
4 Modeling B
4.1 Characteristics of modeling
N201 N1 N71
x
–10 +10
0
Cutting: 28 linear elements in length, (even progression of meshs that in the grid of modeling A).
Warning : The translation process used on this website is a "Machine Translation". It may be imprecise and inaccurate in whole or in part and is
provided as a convenience.
Copyright 2020 EDF R&D - Licensed under the terms of the GNU FDL (http://www.gnu.org/copyleft/fdl.html)
Version
Code_Aster default
Titre : TPLS100 - Plaque infinie soumise à des flux antisy[...] Date : 12/12/2011 Page : 7/7
Responsable : HAELEWYN Jessica Clé : V4.03.100 Révision :
ec141ab1fe57
In modeling A with meshs TRIA6, one notes that the variations on flows are lower than 1%, except in
the zones where those are very weak.
Warning : The translation process used on this website is a "Machine Translation". It may be imprecise and inaccurate in whole or in part and is
provided as a convenience.
Copyright 2020 EDF R&D - Licensed under the terms of the GNU FDL (http://www.gnu.org/copyleft/fdl.html)