Professional Documents
Culture Documents
What Is Rating Protection Devices and Explain.
What Is Rating Protection Devices and Explain.
Home Electrical
*Short circuit can produce cough thermal and electromagnetic forces to destroy any protective device.
*When selecting a protective device, it is very important to consider the available short circuit amperage, or
SCA, which is the potential amperage at any site in the system.
* The SCA will be measured at the equipment terminals, the utility transformer and the distribution panel.
The highest value will be the power transformer
The conductivity of the material, its size and its length will reduce the SCA down the line from the
transformer. The correct size over current protection device can be chosen when the system’s SCA is
known. SCAs are measured in amperes.
Fuses and circuit breakers are assigned an amperage interrupting capacity, or AIC, which indicate the SCA
that be can sustained before tripping. Unless otherwise designated, fuses are rated 10,000 AIC and circuit
breakers are rated 5,000 AIC.
Protection devices are rated to manage both the normal maximum load and the potential short circuit
amperage at any given part of the system.
Equipment controls should have a short circuit rating that enables them to absorb current while the
protective device clear the circuit. If the rating of the controller is lower, a fast-clearing fuse with a lower
rating than the controller should be used
What is short circuit protective devices What is reactive power& also explain in detail.
Leave a Reply
Your email address will not be published. Required fields are marked *
Comment
Name *
Email * Website
Save my name, email, and website in this browser for the next time I comment.
POST COMMENT
Recent News
Follow Us
Browse by Category
Recent News
“Gravity die casting has no future due to emergence of pressure die casting” it’s true? /
Can the ferrous metals be cast by die casting method If yes, then how? / Home 1 / Home 2 / Home 3 / Home 4 /
Home 5 / Home 6 / Sample Page / The Principle of Operation of Diesel Engine. /
What Are The Different Characteristics Of Powder In Welding / What is Flow Control Strategies /
Why is aluminum preferred to be done by cold chamber die casting than hot chamber die casting?
Notice: ob_end_flush(): failed to send buffer of zlib output compression (0) in /home/zillionsbuyer/public_html/blog/wp-
includes/functions.php on line 4673