Professional Documents
Culture Documents
Modification Bulletin No. 69 Page 1 of 3 ISSUED ON: July 31, '91
Modification Bulletin No. 69 Page 1 of 3 ISSUED ON: July 31, '91
Reason for
To continue supplying parts
Modification
A.B.C. Inter- Part needed for replacement by new part Parts Catalog
Draw Old Parts New Parts Q’ty Used
Description change-
No. No. No. Old → New
Rank ability Part No. Description Index No. Page
* New Index
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 69 Page 2 of 3 ISSUED ON: July 31, ’91
DETAILS OF MODIFICATION
According to the M2 MB No.62, the following parts were changed to standardize with the M210.
X/X
P/N 52163180 P/N AD031130
O/O (As a set)
X/X
P/N 52163141 P/N A0273141
However, P/N 52163180 (black development roller) is no longer available. To continue supplyi ng parts to the
field, P/N 52169505 has been registered as a service part instead of P/N 52163180.
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 69 Page 3 of 3 ISSUED ON: July 31, ’91