This document is a test certificate for steel bars that were produced according to IS 1786 standard. It provides the results of tests on a batch of 45.65 metric tons of 10mm TMT steel bars. The bars met all requirements for chemical composition, mechanical properties like yield strength and tensile strength, bend and rebend tests according to the IS 1786:2008 specification for Fe 500D grade steel. The steel bars were produced via the blast furnace, basic oxygen furnace, ladle furnace, continuous casting, and bar mill process route.
This document is a test certificate for steel bars that were produced according to IS 1786 standard. It provides the results of tests on a batch of 45.65 metric tons of 10mm TMT steel bars. The bars met all requirements for chemical composition, mechanical properties like yield strength and tensile strength, bend and rebend tests according to the IS 1786:2008 specification for Fe 500D grade steel. The steel bars were produced via the blast furnace, basic oxygen furnace, ladle furnace, continuous casting, and bar mill process route.
This document is a test certificate for steel bars that were produced according to IS 1786 standard. It provides the results of tests on a batch of 45.65 metric tons of 10mm TMT steel bars. The bars met all requirements for chemical composition, mechanical properties like yield strength and tensile strength, bend and rebend tests according to the IS 1786:2008 specification for Fe 500D grade steel. The steel bars were produced via the blast furnace, basic oxygen furnace, ladle furnace, continuous casting, and bar mill process route.
This document is a test certificate for steel bars that were produced according to IS 1786 standard. It provides the results of tests on a batch of 45.65 metric tons of 10mm TMT steel bars. The bars met all requirements for chemical composition, mechanical properties like yield strength and tensile strength, bend and rebend tests according to the IS 1786:2008 specification for Fe 500D grade steel. The steel bars were produced via the blast furnace, basic oxygen furnace, ladle furnace, continuous casting, and bar mill process route.
IISCO STEEL PLANT BURNPUR - 713325, WEST BENGAL, INDIA (Registered Office: Ispat Bhawan, Lodi Road, New Delhi - 110003) CM/L-0183135 TEST CERTIFICATE FOR HIGH STRENGTH DEFORMED STEEL BARS AND WIRES FOR CONCRETE REINFORCEMENT
TEST CERTIFICATE NO. : TC_8000051153 TC DATE : 22.11.2020 Page No. : 1 of 1
SHIPPING ADVICE NO. : 8000051153 SHIPPING DATE : 22.11.2020 CONSIGNEE NAME & ADDRESS : VENKATESH STEEL INFRA PVT. LTD. WAGON/TRAILER NO. : NL01G2298 2ND FLOOR, 205, AVALON APARTMENT M.G ROAD ,NEW MANGLAPURI ,NEW DELHI -110030 It is certified that the material described below fully conforms to IS 1786 : 2008. Chemical composition and Mechanical properties of the product, as tested in accordance with the Scheme of Inspection and Testing contained in the BIS Certification Marks Licence No. CM/L-0183135 are as indicated below against each Order/Cast No. (Please refer to IS 1786 : 2008 for details of specification requirements) TEST RESULTS Order / MP No. & Date : 1500080374 (18.11.2020) Total weight : 45.650 MT Material : TMT BAR Nominal Size : 10 mm, Length : 12 m Grade and Quality : IS 1786 : 2008 Fe 500D Brand Name : SAIL TMT EQR CAST NO QTY Chemical composition (MT) C% Mn% S% P% S+P% Si% Al% Cu% Cr% Cu+Cr% Nb% V% Ti% B% Nb+V+ Mo% N2 CE% Ti+B% (ppm) Specification Min - - - - - - - - - - - Max 0.25 - 0.040 0.040 0.075 - - - - 0.30 0.50 32008648 45.650 0.22 0.87 0.012 0.027 0.039 0.17 NS 0.01 0.01 0.02 NS NS NS NS Tr NS NS 0.37
Cast No. Mechanical Properties
YS ( N/mm2) min YS ( N/mm2) max Tensile Strength TS/YS ratio Elongation % (Std GL) Total elongation at Bend Test Rebend Test N/mm2 maximum force % Specification 500 min 565 min 1.10 min 16.0 min - 3d min 6d min 32008648 556 573 640 1.15 16.7 6 OK OK
Surface Defects (Piping / Other Defects): Absent
The material supplied conforms to the standard rolling and mass tolerance. Process Route : BF-BOF-LF-CC-Bar Mill
Remarks: Chemical Composition reported is Ladle Analysis. AUTHORISED SIGNATORY
Legend (where applicable) : NS/- = Not Specified; Tr = Traces; YS = Yield Strength; TS = Tensile Strength; Std GL = Standard Gauge Length CE = C + Mn/6 + (Cr + Mo + V)/5 + (Cu + Ni)/15