The reverse channel in CDMA operates in the 869-894 MHz frequency band with 1.25 MHz channels for mobile-to-cell communication. It uses OQPSK modulation and spreads data symbols with 42-bit PN codes that are further scrambled in the in-phase and quadrature phases by additional PN spreading codes, rather than separating symbols with orthogonal codes like the forward channel.
The reverse channel in CDMA operates in the 869-894 MHz frequency band with 1.25 MHz channels for mobile-to-cell communication. It uses OQPSK modulation and spreads data symbols with 42-bit PN codes that are further scrambled in the in-phase and quadrature phases by additional PN spreading codes, rather than separating symbols with orthogonal codes like the forward channel.
The reverse channel in CDMA operates in the 869-894 MHz frequency band with 1.25 MHz channels for mobile-to-cell communication. It uses OQPSK modulation and spreads data symbols with 42-bit PN codes that are further scrambled in the in-phase and quadrature phases by additional PN spreading codes, rather than separating symbols with orthogonal codes like the forward channel.
The Reverse channel is the mobile-to-cell direction of communication or the uplink
path. CDMA reverse channel uses frequency band of 869-894 MHz, Bandwidth of each channel is 1.25 MHz. The reverse link is separated from forward link by 45 MHz. Modulation scheme used is OQPSK (Orthogonal Quadrature Phase Shift Keying). There is no spreading of the data symbols using orthogonal codes instead orthogonal codes are used for waveform encoding. Spreading is carried out by 42-bitlong PN codes. After spreading they are further scrambled in phase and Quadrature phase by PN spreading codes.