Professional Documents
Culture Documents
Thermodynamics-Full-Catalogue PDF
Thermodynamics-Full-Catalogue PDF
Thermodynamics-Full-Catalogue PDF
Fluid Machines
Fans &
Water &
Blowers
Oil Pumps
Air Compressor
Oleodynamics &
Pneumatics
Heat Exchangers
Heat Generators
WHAT IS In our modern world dominated by the energy The principles of fluid mechanics, fluid power and
FLUID MACHINES? problem, fluid machines are essential for industrial, heat transfer find their application in different types
social and personal use, since they allow to of fluid machines; these machines can employ
generate, transform, transport and exploit many pressurized or unpressurized fluids, such as water,
forms of physical and chemical energy not directly air and oil, using different energy sources, such as
available from natural sources. solar energy, electricity, coal, gas and other fuels.
Many applications of fluid machines are present
around us; they include heat generation, heat The main topics to be treated in a training course on
transfer, water transportation, distribution and fluid machines are the following:
management for personal, collective and industria • Principles of fluid mechanics
needs, and the transformation of mechanical and • Principles of thermodynamics
electrical power by means of turbines, pumps, • Fluid circuits, components and machines
compressors, blowers and heat exchangers. • Thermodynamics systems, components and
The new generation of technicians must acquire a machines
deep know-how on the principles and the • Maintenance and troubleshooting
characteristics of fluid machines.
Teaching and Learning
Fluid Machines
Theoretical lessons
must provide the students with basic knowledge
of the physical principles governing fluid dynamics.
A modern generation
and pumping plant with Pelton turbines
• to acqui re a pract ical understanding of the Training equipment can be chosen as a separate
hydrostatics, hydrodynamics and thermodynamics components or can be integrated with other elements
principles; to build different types of laboratories in fluid
• to understand the basic properties of hydraulic and machines.
thermodynamic circuits; • basic level
• to become familiar with the operating principles of • intermediate level
different fluid machines; • advanced level
• to learn the relevant design principles; • tailored on customers requirements
• to become skilled at managing fluid machine
plants;
• to improve the capabilities on the maintenance of
fluid components, machines and plants;
• to become able in fluid equipment troubleshooting;
• to acquire skills in plumbing.
FLUID MACHINES
Equipment
Full-Scale Cutaways
Instrumentation
Components
FLUID MACHINES
Instrumentation
Accessories and
Complements
Laboratory and
Workshop Furniture
DETAILED DESIGN
The general design is translated into
GENERAL DESIGN detailed parts, including layouts,
technical data and specifications, and PRODUCTION
The project objectives are specified and The production of the equipment is
form the basis for technical discussions teaching aids.
carefully controlled to assure the
between the customer and the project . highest quality standards.
FEASIBILITY STUDY
Interviews with the customer allow to DELIVERY
identify his needs and other Each part is carefully packaged,
informations important for the project including all references for easy
definition. identification once reaching the final
destination. All deliveries are monitored
by computers for prompt orders
execution.
FLUID MACHINES
Turn-Key Solutions
Regional offices and local agents assure a In order to insure a satisfactory and long-lasting
prompt and professional attention to the request operation of the equipment, a number of
of our clients. dedicated after sale and support services has
been developed, that include:
Furthermore, our commercial department keeps
customers regularly posted on the latest • laboratory installation, start-up and testing,
technological innovations concerning their field • equipment maintenance programs,
of interest and our lines of production, so that • supply of spare parts and consumables for a
they can keep their laboratories continuously easonable number of years,
updated. • training and continuous education.
FLUID MACHINES
After-Sale Training
and Continuous
Education Programs
“Knowledge” must be constantly joined to “ability”
all through the “learning process”.
Technology is advancing at an exponential pace,
thus requiring a continuous and life-long process
of technical education.
FLUID MACHINES
FLUID MACHINES THERMODYNAMICS
Turn-key Laboratories
PRODIT philosophy is centered on the customers’ needs, and therefore teaching solutions are usually designed and implemented according
to customers’ requirements.
When customers prefer standard solutions, PRODIT is able to provide turn-key laboratories complete with instrumentation, machines,
accessories and complements, audiovisual aids, consumables, furniture and electrical plant.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING SpA
Thermodynamics
▸
SF15380309/E
pag.
XII
Basic level: To acquire basic skills and capabilities and expand their knowledge
package
OP0305/000/097N Closed circuit operation module X X 6
GR0305/000/035 Double pipe water/water heat exchanger test units X X 7
Quantity of each item is to be tailored as a function of the number of students foreseen for each laboratory
GR0305/000/098 Evaporative cooling towers X X 8
GR0305/000/148 Boiling and condensing heat transfer apparatus X X 9
Turn-key Laboratories
GR0305/000/011 Dynamic behaviour of a plate heat exchanger X X 9
GR0305/000/099 Modular system for heat transfer laws demonstration X X 10
GR0305/000/099A Free and forced heat convection training module X X 10
GR0305/000/149 Thermal radiation and natural convection heat transfer apparatus X X 11
GR0305/000/077 Instantaneous electric steam generators X X 11
GR0305/000/144 Pressure/temperature relationship of saturated steam (marcet boiler) X X 11
GR0359/000/009 CP/CV determination apparatus X X 12
GR0310/000/147 Calorimeter berthelot-mahler X X 12
GR0305/000/039 Temperature measurement and calibration bench X X 12
GR0305/000/141 Mechanical equivalent of heat apparatus X X 12
GR0305/000/140 Thermal radiation laboratory (stefan - bolzmann law) X X 13
GR0305/000/024 Laboratory steam generator for low temperature works X X 13
GR0305/000/096 Tray drier X X 14
GR0305/000/500 Heating systems technology X X 15
GR0305/000/014 Heating plant trainers X 16
GR0305/000/025 Heating plant circulation pump study unit with single pump and/or two pumps operating in series/parallel X X 17
GR0305/000/026 Heating plants distribution and mixing study unit with three-way and four-way valves X X 17
GR0316/000/014D Thermal energy traning unit X 18
Complementary Studies X X
SE0105/000/001 Impulse type steam turbine X X 25
SE0105/000/004 Oil and gas burner X X 25
SE0105/000/011 Multi-stage centrifugal high pressure pump for boiler water feeding X X 26
SE0105/000/013 Steam injector with automatic priming for boiler emergency water feeding X X 26
SE0105/000/020 Bourdon type spring gauge X X 27
SE0105/000/025 Spring type safety valve X X 27
SE0105/000/030 Vapour tension thermostatic steam trap X X 28
SE0105/000/032 Steam trap-turned over pail (bucket) type X X 28
SF15380309/E
◂
pag.
XIII
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Basic level: To acquire basic skills and capabilities and expand their knowledge
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING SpA
MO0205/000/8650 Steam engine instructional model with centrifugal governor X X 33
MO0205/000/002 Model (1:5) of a horizontal smoke tubes steam boiler, enbloc type complete with super heater and all X X 33
accessories for automatic operation
MO0205/000/017A Steam generator model with vertical water tubes and two cylindrical bodies X X 34
Quantity of each item is to be tailored as a function of the number of students foreseen for each laboratory
MO0206/000/8350 Small model of an axial type turbojet engine X X 34
Turn-key Laboratories
pag.
XIV
Basic level: To acquire basic skills and capabilities and expand their knowledge
Quantity of each item is to be tailored as a function of the number of students foreseen for each laboratory
AV15UN/A45/007 Slide projectors X X 54
AV15UN/A40/018B Digital Reflex Camera X X 55
Turn-key Laboratories
AV15UN/A43/015A Digital Video Camera X X 55
AV15UN/A43/009A Web Cam X X 55
MA0922/A92 Colour scanner X X 56
AV53 Series Set of didactic poster in manu different technical fields X X 56
AV53UN Series Set of poster in security X X 56
MA0903/G04/001 Automatic pumping units for water supply X X 59
MA0903/U16/006 Portable threading machine X X 59
MA0903/F07/004 Hot air welding device X X 60
MA0903/U68/001 Pipe and drain cleaners X X 60
MA0903/U68/002 Drain cleaners X X 60
MA0909/E09/001 Band saws heavy-duty type X X 60
MA09UN/E09/002 Circular cut-off sawing machine X X 61
MA09UN/U68/003 Electric pipe cutting machine X X 61
MA09UN/E25/005 Heavy duty angle grinding cutting machines X X 61
AC1111/A09/001 Single-seat self-operated fume suction unit X X 61
MA09UN/E03/003 Bench drill X X 62
MA09UN/E03/016 Column drilling machines X X 62
MA09UN/E12/001 Grinding machines with grinding wheels X X 62
MA09UN/E11/002 Grinding machine for twist drill column type X X 63
MA09UN/E25/037 Portable electric drill X X 63
MA09UN/F04/001 Portable ac welders X X 63
MA09UN/E12/003 Column sanding and cleaning machines X X 64
MA09UN/E24/024 Air compressor units X X 64
MA2303/G04/005 Water supply and drainage module X X 64
ST10UN/S17/015 U-tube manometers X X 67
GR0329/000/040 Adjustable slope micromanometer X X 67
OP0303/000/031N-O-T Multimanometers X X 67
SF15380309/E
◂
pag.
XV
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Basic level: To acquire basic skills and capabilities and expand their knowledge
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING SpA
ST10UN/S17/022 Flow monitors and transmitters X X 71
ST10UN/S17/016 Flowmeter axial - flow type X X 71
Quantity of each item is to be tailored as a function of the number of students foreseen for each laboratory
ST1003/S17/001 Cold and hot water meter X X 71
ST1003/S17/021 Variable area flowmeters X X 72
Turn-key Laboratories
pag.
XVI
Basic level: To acquire basic skills and capabilities and expand their knowledge
Quantity of each item is to be tailored as a function of the number of students foreseen for each laboratory
Vernier calipers and micrometers X X 90
Ruler X X 91
Turn-key Laboratories
Socket wrench and spanner set X X 92
Wrenches X X 93
AC11UN/U10/021 Allen keys X X 94
AC11UN/U67/012 Scissors X X 94
Pliers and nippers X X 95
Mechanical tools X X 96
AC11UN/U52/003 Three-jaws outside pullers X X 97
AC11UN/U16/013 Tap and die assortment X X 97
AC11UN/U32/022 Tools assortments for industry X X 97
AC11UN/U32/012 Tool bags for electricians X X 98
AC1108/W18/008 Cable terminal assortment X X 98
AC11UN/U66/004 Grinding wheel dressers X X 98
AC11UN/U38/002 Drill bits set X X 99
AC11UN/U20/001 Pump oiler99 X X 99
AC11UN/U21/999 Magnifying lenses X X 100
AC11UN/U59/070 Professional levels X X 100
AC11UN/A17/999 Ladders X X 101
AC11UN/U06/003 Safety equipment X X 101
AR0500/A06/001 Series Workbench for servicing, maintenance and assembling practice on refrigeration systems X X 105
AR05UN/A06/010 - Workbenches X X 105
AR05UN/A06/011 Series
AR05UN/A06/002 Series Workshop steel tables with cabinet and drawers base units for large storage capacity X X 106
AR63UN/A05/020 Series Powered top laboratory X X 106
AR05UN/A15/019 Series Service tables X X 107
AR05UN/A06/016 Wheeled service benches with wooden top X X 107
AR05UN/A01/009 Series Cabinet swinging door style X X 107
AR05UN/A03/001 Cabinets sliding doors type X X 107
AR63UN/A20/008 Series Two Seats Classroom Benches X X 108
SF15380309/E
◂
pag.
XVII
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Basic level: To acquire basic skills and capabilities and expand their knowledge
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING SpA
AR05UN/A23/003 Series Service trolleys X X 111
AC11UN/A23/004 Series Heavy duty trolleys X X 111
Quantity of each item is to be tailored as a function of the number of students foreseen for each laboratory
AR05UN/A01/005 Storage bin X X 112
AR05UN/A01/010 Bin cabinet for laboratory components X X 112
Turn-key Laboratories
Electrical Plant X X
▸
SF15380309/E
pag.
XVIII
INDEX
Electrotechnology
Surveying and Civil
Engineering
Drilling
Sciences
Renewable Elergies
Aeronautics
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING SpA
General
Agriculture Mechanics
and Food
Technology
Industrial
Process
Control
Textile &
Garments
Mechatronics and
Robotics
Material
Testing
Metallurgy
Refrigeration &
Air Conditioninig
SE - Full-Scale Cutaways for Training Purposes for Fluid Machines Thermodynamics . . . . . . . . . . . . . . .page 23
◂
pag.
XIX
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
INDEX
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING SpA
ST - Instrumentation for Fluid Machines Thermodynamics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 65
AR - Laboratory and Workshop Furniture for Fluid Machines Thermodynamics . . . . . . . . . . . . . . . . . . .page 103
▸
SF15380309/E
pag.
XX
GR0305
EDUCATIONAL AND
TRAINING EQUIPMENT
FOR FLUID MACHINES
THERMODYNAMICS
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Educational and Training Equipment
The form in which energy circulates from one system to another when they are at two different
temperatures is called heat.
Work, instead, is the form in which energy circulates from one system to another by using a
mechanical device.
In order to analyze the various forms of energy and the ways in which it transforms itself, specific
apparatuses are needed.
To this purpose, Prodit has designed and manufactured a series of fully instrumented training units
that allow demonstration and investigation around thermodynamics topics and make thus possible a
complete understanding of the various aspects that characterize this complex but fascinating field.
Vocational and technical schools have at their disposal a wide selection of didactic equipment to
complete or set up their thermodinamics laboratory.
▸
SF15380309/E
pag.
2
STEAM BOILER/TURBINE
The complete modular steam plant includes: •steam boiler; •water feeding and treatment; •preheater; •steam accumulator; •steam superheater;
•steam flow meter; •desuperheater; •pressure reduction group; •steam turbine; •steam condenser; •condensate accumulator; •cooling tower.
Options available include: •computerized data acquisition and processing; •fault simulation; •steam characteristics determination equipment;
•smoke temperature measurement; •burner air intake flow measurement device.
These boilers are extremely compact, they require the minimum of installation and generate steam in a very short time after light-up.
Experimental range:
•Heat balance determination; •Turbine power output calculation; •Power curve measured by dynamometer; •Heat generator and turbine
efficiency; •Fuel and operating fluid specific consumption; •Plant overall efficiency determination; •Cooling tower performances when varying the
following parameters: water flow rates, air flow rate, heating power; •Calculation of the water specific heat cp as a function of the temperature;
•Pressure/temperature relationship of saturated stream investigation; •Plot the cycle (T against S and H against S); •Flue gas analysis; •Water
treatment (softening, pre-filtering and reduction); •The most common faults occurring in this kind of plants can be simulated for an accurate
troubleshooting; •Investigation on how to increase the plant efficiency: vaporisation pressure and overheating (superheating) temperature
increase, effects of turbine discharge pressure on efficiency, pre-heating, steam accumulator utility, atmospheric turbine discharge.
For further information please ask for the relevant Technical Description.
◂
pag.
3
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Apparatus to investigate the behaviour of a steam condenser
Educational and Training Equipment
For the determination of the dryness fraction of steam. This prearranged for parallel flow and counterflow. Cooling water is
apparatus comprises two calorimeters: measured by a flowmeter and condensate flow is measured by a
- in the first one the water content of wet steam is separated by volumetric tank.
inertia an the water volume determined by a gauge glass.
- in the second one, the relatively dry steam delivered from the Thermometers are fitted at in and out of water and steam circuit.
separating calorimeter is subjected to adiabatic throttling and the Heat removed by cooling water and steam entalphydrop can be
original dryness fraction one can be calculated from the degree to determined.
superheat of the steam in its low pressure phase.
For further information please ask for the relevant Technical For further information please ask for the relevant Technical
Description. Description.
Apparatus to investigate the principle of using steam to lift cold water A battery of four steam pipe are arranged vertically and supplied with
for boiler feed or other purposes. To compare the flow of water steam from the top. Provision are made for collection of condensate at
through the injector with the consumption of live steam, supplied at the bottom. One pipe has a bare metal surface and three are lagged with
various pressure. the injector consists essentially in a nozzle through different materials, which are specified. The effectiveness of the lagging
which steam passes acquiring high velocity and condensing tube. may be directly observed by comparing the quantity of condensate
That creates a partial vacuum into which the water flow through the collected from each pipe. Other experimental steam equipment include:
supply pipe. Thanks to this principle water is pressurized some bar •Marcet Boiler to investigate the relationship between pressure and
above te boiler pressure. temperature of saturated steam; •flow through a convergent-divergent
nozzle to investigate around pressure variation along the length of the
For further information please ask for the relevant Technical system related to the flow; •flow through-convergent nozzle apparatus;
Description. •pressure temperature of wet steam apparatus; •apparatus to
demonstrate the laws governing compressible flow in nozzles.
▸
Code: GR0305/000/032 SERIES
SF15380309/E
The unit has been designed to give students a low cost, simple
and reliable apparatus for comprehensive tests on heat
exchangers. It consists of a table top frame mounting up to four
water/water heat exchangers of different type.
Suggested experiments:
• Temperature reading by means of digital instruments
• Parallel and counter flow tests of the four heat exchangers available
• Calculation of the total exchange coefficient for the four types of heat exchangers
• Determination of the heat exchangers efficiency
• Calculation of the logarithmic average temperature difference that represents the effective temperature differential
• Plotting of the curves of the heat transferred Q against various flow-rates of one of the two fluids, keeping constant the flow rate of the second
fluid (and vice-versa) and under various inlet temperature differences of both fluids.
• Plotting of curves similar to the previous ones, but against the logarithmic average difference and verification of the difference compared with
previous case
• Plotting of the curves showing the inlet and outlet temperatures of both fluids under conditions of parallel flow and counterflow for the different
exchangers
• Drawing up of the test sheet and calculation of the different exchange parameters under various conditions
• Plotting of the curves related to head losses when crossing heat exchangers
Available options:
- Additional forced air/water heat exchanger to study heat transfer in radiators, condensers, evaporators etc.
- Computerized Data Acquisition and Processing
For further information please ask for the relevant Technical Description.
◂
pag.
5
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
straightener used together with the GR0305/000/097 series Heat
Educational and Training Equipment
For further information please ask for the relevant Technical Code: OP0305/000/097P
Description.
Code: OP0305/000/097M
pag.
6
Experimental features
The unit allows to perform the following experiments:
• Reading temperature on digital electronics thermometers
• Test procedure for heat exchanger testing, the problem of the temperature stabilizing in heat exchanger testing
• Parallel flow heat exchanger testing. Heat exchanged against waterflow rate
• Counter flow heat exchanger testing. Heat exchanged against waterflow rate.
• Mean temperature difference under parallel flow conditions
• Mean temperature difference under counter flow conditions
• Overall heat transfer coefficient
• Theoretical calculation of the overall heat transfer
• Heat convection coefficient determination
• Efficiency of heat exchanger
• Head losses in water flow related to flow rates at various Reynolds number rates.
• Effects of turbulators on heat exchange efficiency.
Available options:
- (2+2) of smooth surface double pipe (coaxial) heat exchanger
- 2m smooth plus 2m turbulated double pipe heat exchanger
- Highly powered unit for high difference o temperature between the two fluids
- Additional length (2+2)m of double heat exchanger with further different type of turbulator
- Laminar/turbulent flow test unit
- Diathermic Oil or lubricant oil/water heat exchanger option
- Computerized data acquisition and processing.
For further information please ask for the relevant Technical Description.
◂
pag.
7
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
EVAPORATIVE COOLING
Educational and Training Equipment
TOWERS
Experimental range:
Available options:
For further information please ask for the relevant Technical Description.
▸
SF15380309/E
pag.
8
This apparatus has been developed in order to allow students to perform experiments on heat transfer from a solid surface to the surrounding
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
For further information please ask for the relevant Technical Description.
Heating power is measured with V/Ammeter, water flowmeter for cooling flow rate determination.
Experimental range:
• study of heat transfer from a solid surface to the surrounding liquid under various conditions
• effect of film/nucleate boiling on heat transfer
• variation of Nusselt number with temperature
• visual observation of convection current, film boiling and nucleate boiling
• visual observation of film condensation and drop condensation
Top bench demonstration unit, it consists of a plate heat exchanger with transparent end plates.
Plate heat exchanger are high efficiency exchangers because of their construction that produce high turbulence in the flow paths. Plate
exchangers are very diffused in industries.
The two fluids are differently coloured and pumped in the two circuits in such a way that turbulent flow generation and dynamic behaviour of the
exchanger can be shown and efficiency become evident.
For further information please ask for the relevant Technical Description.
◂
pag.
9
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
The modular system has been conceived to give students a better understanding of the heat transfer phenomena. The units have been designed
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
in order to permit an easy and clear monitoring of all features regarding the physical phenomena of the heat conduction, convection and radiation
Educational and Training Equipment
with the main object to verify the laws governing them. Available options include: •Radial conduction - heat transfer module; •Linear conduction-
heat transfer module; •Extended surface heat transfer module; •Computerized data acquisition and processing. Experimental tests: -Application
of the Fourier Law for the calculation of the thermal flow by steady-state conduction through solid materials; -Measurement of the temperature
distribution for steady-state conduction (radial and linear thermal flow ) and plotting of the graphic temperatures against radial coordinates or
distance for linear heat conduction module; -Calculation of the thermal conductivity of the material and plotting of the graphic thermal
conductivity against temperatures; -Study of a mathematical model to represent the law (T); -To calculate the heat transfer from an extended
surface coming from both free convection and radiation modes and comparing the obtained values with a theoretical analysis; -To plot the
temperature distribution along an one-dimensional extended surface (rod or pin) by measuring the temperature at regular intervals along the
rod length and comparing the result with a theoretical analysis.
The unit consists in a module compatible with the heat transfer control unit intended to provide all the basic demonstrations that the students
have to perform in a practical training course; Designed to demonstrate convective heat transfer coefficients, temperature profiles and heat flux
in air duct. The unit consists of a centrifugal fan connected to a round vertical outlet duct which mounts a bank of heated surface cylinders. This
bank can be operated in free convection or forced convection mode. Forced convection is obtained activating the fan that produces a stream of
moving air. In order to investigate about the influence of the geometrical parameters, different lay-outs can be arranged with the heated cylinder
bank. The cylindrical heater supplied are four, they can be arranged and powered in various geometrical lay-outs as single, double, triangular
or square configuration in order to obtain perpendicular or parallel flow, rotated, in-line or triangular lay-outs. For all above lay-outs the
measurement of the electric power supplied together with the surface temperature allows the effects of the tube geometrical arrangement to be
demonstrated. In the meantime when used with a single heater the unit allows to compare the effects of radiation and convection evidencing
the dominance of convection at lower surface temperatures and the dominance of radiation at higher surface temperatures. •Study on the effect
of forced convection on the heat transfer from a cylinder under variable air velocities conditions. •Study of the effect of forced convection on the
heat transfer with different geometrical arrangement of 4 heaters (cylinder) such as parallel, perpendicular, triangular, square, quinconce lay-out
at varying air velocities.•Same studies of previous points for natural convection conditions.•Determination of the domination of the convective
heat transfer coefficient at low surface temperature of the heater and prevailing of the radiation heat transfer coefficient at high surface
temperature.•Determination of the total heat transfer, obtained combining radiation and convection, under various conditions of power inputs, in
▸
SF15380309/E
This training unit has been designed to investigate the most important phenomena concerned to the thermal radiation and the natural convection
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
are concerned. To give a complete knowledge of these phenomena, the group allows the variations of both the pressure inside the test chamber
◂
pag.
11
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
The unit allows to determine the rate of Cp and Cv measuring the two The “Berthelot-Mahler” Calorimeter is fit for the determination of
Educational and Training Equipment
values of heat necessary to raise the temperature of a mass of air (or combustion heat of solid and liquid matters, according to Standars
other gas, through one degree). The two conditions of test ASTM and DIN 51708.
performable by the unit allow the determination of the rate between The unit consist of:
the specific heat capacity at constant pressure and the specific heat •Thermostatic chamber, water jackted, of considerable thickness
capacity at constant volume. sheet-stainless steel, with inside tank of nickel-plated copper, (for the
best heat conductivity) where calorimetric bomb is housed, insulated
on the bottom; •Combustion bomb, closing automatically, made out
For further information please ask for the relevant Technical of a stainless steel equipped with proper connectors for oxigen
Description. charge; •Pellets press, fitted for the preparation of test pellets having
built-in ignition wire; •Coil; •Manometers; •Thermometer by
Berthelot-Mahler with sliding magnifying lens for reading.
Code: GR0359/000/009 SERIES
Code: GR0310/000/147 SERIES
Benches and trainers designed for studying and demonstrating the This unit provides and updated version of one of Joule’s most
various methods of temperature measurement in order to highlight important experiments: linking mechanics and thermodynamics, by
the accuracy, calibration and error sensitivity of each in a variety of establishing the equivalence of work and heat.
working conditions.
Experimental tests allow to find the most suitable measuring device For further information please ask for the relevant Technical
for particular applications. Description.
Available in different versions with basic or advanced set of
equipment. Code: GR0305/000/141 SERIES
▸
Code: GR0305/000/039 SERIES
SF15380309/E
pag.
12
Bench type apparatus for a complete investigation around thermal radiation phenomena. The core of the unit is the Thermal Radiation Cube,
For further information please ask for the relevant Technical Description.
Compact laboratory electric steam generator for low temperature works, they are designed to produce dry and saturated steam. Suitable for any
kind of laboratory where steam is needed.
For further information please ask for the relevant Technical Description.
◂
pag.
13
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Educational and Training Equipment
TRAY DRIER
Industrial driers consist often in hot air stream passing over a tray
where wet materials are held.
Tray driers are typical batch driers consisting of a rectangular
chamber of sheet metal containing supporting racks. Each rack
carries a number of shallow trays which are loaded with the
material to be dried. A stream of heated air circulated over the
stack of trays.
This type of drier is used in small-scale and pilot plant scale
operations mainly to get dry fruits and vegetables.
The unit is composed of an insulated tunnel, trays, and a heat source for circulating the heated air. Variable speed fan for air circulation allows
air velocities typical for tray driers.
Experimental Range:
For further information please ask for the relevant Technical Description.
▸
SF15380309/E
pag.
14
The current method used for the study of residential or commercial heating systems and hot water production has been developed in modular
units. Such modules are organic blocks that allow technologically advanced heating plants, both collective and individual, to be designed with
extreme flexibility of interconnection.
The system's extreme flexibility allows various types of plants, components, circuits, regulation systems, connections, and devices to be used
from time to time as required by the design.
The system's modularity therefore lets every module adapt to the demands of the circuit. In particular, heating element and manifold modules
are integrated with wall-floor simulation for real execution of heat distribution networks.
A wide range of accessories is used to adapt circuit components to main modules; •boiler modules; •blown air burner modules, •instrument
holder module; •safety and control instrument kit (floor boilers); •circuit filling modules; •modules for primary distribution systems with circulation
pump; •manifold modules for network and zones;•”all materials” circuit modules; •end modules for single users; •terminal heat regulation module;
•module for computation of heat; •climatic control unit; •modular power supply module; •chimney modules; •flue gas analyzer with dial
thermometer in chimney module; •fuel supply module; •fuel flow rate metering modules; •modules for the metering of the air flow rate.
Analysis and testing of: •Computation of energy distributed to the various units; •Highlighting of design parameters and checking of their
influence on plant performance; • Comparison of different plants and systems with regard to performance and cost; •Evaluation with regard
to energy saving and economy of management of: Noise, Room comfort, Atmospheric pollution
The plant provides: •Practical construction of a series of heating plants featuring: design variables (plant types); configuration variables
(component types); circuit variables (circuit types); regulation variables (regulation system types); construction variables (connection system
and/or component types); measurement variables (instrument and regulation types)
Testing and study: •of differences in performance of different circuits; •of differences in performance of different components; •of differences in
performance of different regulation systems.
For further information please ask for the relevant Technical Description.
Code: GR0305/000/500
SF15380309/E
◂
pag.
15
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Educational and Training Equipment
Mounted on wheeled steel frame the unit carries the boiler for
heat generation, the heat distribution system of both 3-way or 4-way types, a selection of different thermal loads (radiator and convectors), the
instrument board with water flow meters, digital thermometers, oil consumption measurement device, and the heating regulation devices.
Ambient temperature is simulated through potentiometer in order to run the unit in any ambient condition.
The unit is available in different versions and has been conceived in such a way that many different situations recurring in the field of heat
technology can be easily and realistically reproduced.
Available options:
Experimental range
For further information please ask for the relevant Technical Description.
▸
SF15380309/E
pag.
16
HEATING PLANT CIRCULATION PUMP STUDY UNIT WITH SINGLE PUMP AND/OR TWO
PUMPS OPERATING IN SERIES/PARALLEL
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Available options:
- single pump and/or two pumps unit
- computerized data acquisition and processing
For further information please ask for the relevant Technical Description.
HEATING PLANTS DISTRIBUTION AND MIXING STUDY UNIT WITH THREE-WAY AND
FOUR-WAY VALVES
This plant makes it possible to study the operation, water distribution and mixing in heating plants by means of three-way and four-way mixing
valves.
Water flows in the different circuit branches are clearly shown by instantaneous indicator instruments.
Hot water is produced by a unit with resistors, whereas the plant thermal load is simulated by a water-water heat exchanger.
The unit is supplied on a wheeled frame for easy transport inside the laboratory.
For further information please ask for the relevant Technical Description.
◂
pag.
17
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Educational and Training Equipment
This training unit is conceived in order that students can practice with a typical solar thermal energy collection and storage systems.
The purpose of this training unit is to make practice with the assembling, start-up and control of a typical solar thermal energy collection and
storage systems. Two types of flat solar thermal collectors are provided (one without a glass cover and the other with a glass cover), whose
characteristics will be compared with each other. A thermal storage tank is provided, in order to store thermal energy from the solar thermal
collector and deliver it later, when the sun will be no more shining.
The students can observe the effects of the variation of fluid flow on the Delta T of the solar thermal collector, on its power output and on its
efficiency, at different irradiation levels. A PC will help in recording measured values, drawing Delta T - Efficiency charts and calculating the
maximum power which may be generated at the desired temperature.
The charts of the different types of panels can then be compared with each other. Once defined the characteristics of a solar thermal collector,
the PC will chart the power that it will be able to generate at different hours on certain days, as solstices and equinoxes, and calculate the total
annual energy production, also taking into account the frequency of diffused light conditions (cloudy sky) of a certain location.
The integrated software allows the users to perform several exercises, some of which are:
• Efficiency calculation for collectors with glass and without glass
• Collector performance curve
• Collector performance comparation
• Effects of various solar power based on clouds density an sunlight emission.
Code: GR0316/000/014D
▸
SF15380309/E
pag.
18
Complementary Studies
Electrotechnology
Surveying and Civil
Engineering
Drilling
Sciences
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Aeronautics
FLUID MACHINES THERMODYNAMICS
General
Agriculture Mechanics
and Food
Technology
Industrial
Process
Control
Textile &
Garments
Mechatronics and
Robotics
Material
Testing
Metallurgy
Refrigeration &
Air Conditioninig
Plumbing
Automotive
Hydraulics
SF15380309/E
◂
pag.
19
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Four stroke, four cylinders petrol engine for assembling and disassembling
Educational and Training Equipment
see Automotive
Catalogues
Small Engine Dynamoemter
4
I.C. Engines Dynamometric Test Unit
5 see Automotive
Catalogues
▸
see Refrigeration and
Air Conditioning Catalogues
Basic Refrigeration, Air Conditioning and Heat Pump Trainer
with Modular Multi-System Condensing Unit
6
SF15380309/E
pag.
20
8
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
10
SF15380309/E
◂
pag.
21
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
05
SE0105
FULL-SCALE CUTAWAYS
FOR TRAINING PURPOSES
FOR FLUID MACHINES
THERMODYNAMICS
FLUID MACHINES THERMODYNAMICS
The demand for technicians and for skilled workers, who are able to ensure the maintenance and
repair of these plants, continue to increase.
Full-Scale Cutaways for Training Purposes
The knowledge of constructive technologies together with thermodynamics basics are a fundamental
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
qualifying element.
To answer this need, we have prepared a list of typical components used in thermal plants, accurately
sectioned and painted in all the parts in contrasting colours to outline the functions, the fluids, and
the materials of each piece of equipment in accordance with a suitable colour code.
The components sectioned are all original as used in industry and they can be considered as a
connection between school and industry, allowing the student to get first hand knowledge of industrial
technologies in a simple, rapid and very effective way.
Great care has been given to quality and to every minimum detail when producing our sectioned
components. We are convinced that this makes them indispensable elements in the acquisition of
technical knowledge and of the greatest didactic value.
Each sectioned unit is supplied, when requested with its full code as shown in the following pages,
complete with the BTC option
The BTC option consists of a base board on which the component is fitted, an explanatory plate
showing a synthetic description of the component itself and of its field of use together with clear
picture with part list that greatly increases the educational validity of the unit.
An economic version of each cutaway is available on request. This version doesn't include the BTC
option.
▸
SF15380309/E
pag.
24
Training Purposes
IMPULSE TYPE STEAM TURBINE
Sectioned for training purposes
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
The Coppus RL turbine is a single stage impulse type turbine with power up to 60 HP. Two row velocity stage rotor and a row of stationary
reversing blades between the two rows of rotating blades.
The rotor is enclosed between the turbine cover which contains the steam inlet connection, and the turbine casing which contains the steam
exhaust connections. The turbine is fitted on a sturdy steel frame accurately painted and wheeled for easy moving. The unit is sectioned in
all significative details and sections clearly show: •internal configuration of casing; •two rows velocity stage rotor with blades; •steam glow lines;
•throttle valve; •steam strainer; •excess speed safety trip valve; •ball barings and bearing housing; •shaft; •carbon rings and all gaskets; •steam
nozzle and hand valve control; •oil relay governor assembly; •all other components and mechanisms.
The turbine group is accurately varnished in all parts with a particular colour code to highlight sections, constructive details and fluid flow lines.
All metallic parts that are not varnished become polished or chrome plated or burnished. Turbine shaft can be easily rotated by hand.
for Kits
Build-up
Full-Scale Cutaways
The combustion is an exothermic chemical reaction with heat generation, which takes place when a fuel and a comburent get in touch under
suitable conditions. A deep knowledge of the phenomenon is extremely important to achieve both energy saving and environmental safeguard.
The combustion of a liquid fuel takes place only when it is at the gaseous state so a burner must provide to the liquid fuel nebulization: to allow
the reaction between fuel and comburent it is necessary to provide for a complete mixing between fuel dna air.
Burners are accurately sectioned and sections clearly show: •pump; •nozzle; •centrifugal fans; •electrode assembly; •electronic control devices.
Options available: •pressurized oil burner; •modulating flame pressurized oil burner; •thick and extra thick fuel oil burner; •single-stage light-oil
burner; •gas burner complete with all control equipments.
Supplied complete with: base board, explanatory technical plate, plastic cover.
◂
pag.
25
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
Full-Scale Cutaways for Training Purposes FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Multistage pumps cover a large range of duties from high pressure car washing plant pumps to very large high horsepower pumps for boiler
feeding, Interstages are often held together with tiebolts, For certain duties where even the sligh test interstage duties may cause a safety hazard
interstages are connected by separate bolts and the whole interstage assembly is mounted in a cast or fabricated barrel.
The unit is accurately sectioned and sections clearly show: •pump shaft; •ball bearing; •packing seal; •closed impeller; •lantern; •tie bolt.
Supplied complete with: base board, explanatory technical plate and plastic cover.
Code: SE0105/000/011
Injector uses the boiler’s own steam to force water into the boiler. Steam is mixed with the low temperature water that is going to be introduced
in the boiler: this causes steam condensing. Then the steam jet extracts from combining chamber either condensing water or water coming from
outside allowing to keep in that chamber a pressure lower than atmospheric. This process allows the suction of the water to be sent into the
boiler. The unit is accurately sectioned and sections show clearly: •steam inlet; •steam nozzle; •water inlet; •combining chamber; •overflow valve.
Supplied complete with: base board, explanatory technical plate, plastic cover.
▸
SF15380309/E
pag.
26
Training Purposes
material of each piece of equipment in accordance with a suitable
colour code.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Code: SE0105/000/020
for Kits
Build-up
Full-Scale Cutaways
The section clearly shows: •shutter; •gasket; •spring; •O-ring; •adjustment screw; •seal cap.
Though the unit is sectioned, its components keep their movement functionality as if working. All parts are painted in contrasting colours to
outline the functions, the fluid and the material of each piece of equipment in accordance with a suitable colour code.
Supplied complete with: base board, explanatory technical plate, plastic cover.
Code: SE0105/000/025
SF15380309/E
◂
pag.
27
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
Full-Scale Cutaways for Training Purposes FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
The basic principle of thermodynamic steam
TRAP
Steam trap turned over pail type uses a
Thermostatic steam trap exloits the relation bucket and lever arrangement to traps exploits the difference between the
between pressure and temperature to automatically clear-out condensate along condensate and the steam kinetic energy to
separate steam and condensate through the pipes, separators, etc. operate a disc shutter. This kind of steam
use of a thermostatic element. The unit is The unit is sectioned and sections clearly trap is simple, safe and efficient, and these
accurately sectioned and sections clearly show: valve, bucket and vent hole. features make it suitable for the most
show the thermostatic element with shutter, Supplied complete with: base board, exigent industrial appliances. The unit is
body, cover and cover’s packing. explanatory technical plate and plastic sectioned and sections clearly show: disc,
Supplied complete with: base baord, cover. cover and filtering sheet. Supplied complete
explanatory technical plate, plastic cover. with: base board, explanatory technical plate
Code: SE0105/000/032 and plastic cover.
Code: SE0105/000/030 Code: SE0105/000/034
Float traps yse the buoyancy of a ball float to release condensate as The bimetallic steam traps have great drain capacity and are suitable
soon as it firms. For their size, they have a larger discharge capacity for operation with overheated steam, with maximum air and
than most types of mechanical trap, and are equally effective at high condensate drain capacity. They do not contain cool condensate
or low rates of condensate discharge. Trap covers are removable for hence they do not run the risk of freezing. They are resistant to
easy in-line maintenance. This trap has an inbuilt automatic air vent corrosive condensate and water hammer. The unit is accurately
to prevent air-binding. Operation is not disturbed by wide and sidden sectioned and sections show clearly: bimetallic strip, shutter, seal,
fluctuations of pressure. Ball traps are the ideal choice for draining filter, steam inlet and condensate drain.
thermostativally controlled plant. The unit is accurately sectioned Supplied complete with: base board, explanatory technical plate and
and sections show clearly the most important parts such as float, plastic cover.
valve, steam lock release. Supplied complete with: base board,
explanatory technical plate and plastic cover. Code: SE0105/000/033
Code: SE0105/000/031
▸
SF15380309/E
pag.
28
Training Purposes
SELF-ACTING STEAM PRESSURE SELF-ACTING THERMOREGULATOR WITH
REDUCING VALVE DIAPHRAGM TYPE VALVE AND LIQUID EXPANSION REMOTE
Sectioned for training purposes
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
for Kits
Build-up
Full-Scale Cutaways
PISTON VALVE STANDARD PATTERN KLINGER TYPE, SEAT MOUNTED IN VALVE BODY
SUITABLE FOR STEAM CONTROL.
Sectioned for education and training
Through the unit is sectioned, all its components keep their movement functionality as if working. All parts are painted in contrasting colours to
outline the functions, the fluid and the material of each piece of equipment in accordance with a suitable colour code.
Supplied complete with: base board, explanatory technical plate, plastic cover.
Code: SE0105/000/052
SF15380309/E
◂
pag.
29
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
Full-Scale Cutaways for Training Purposes FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
The heat exchanger is a device in which two fluids, flowing in it, exchange heat through a solid boundary or surface. The rate of heat exchange
between the hot and cold stream is determined by the fluids’ physical properties, flow rates, temperatures and by the surface separating the
two streams.
The basic rule for piping at all heat exchangers is: fluid being heated shall flow up while fluid being cooled shall flow down. This can also be
expressed as hot stream in at the top, cold stream in at the bottom.
Supplied complete with: base board, explanatory technical plate, plastic cover.
Code: SE0105/000/060
Careful section of an engine turbo-starter. It works on the same principle of turbine engines, but its dimensions are reduced thus making it more
suitable for training purposes.
The combustion chamber, fuel system, injector, ignition system, epicycloidal reducer and the turbine which has the function to convert thermal
energy into mechanical energy, are clearly displayed.
Code: SE0105/000/062
▸
SF15380309/E
pag.
30
MO0205
TRAINING MODELS FOR
FLUID MACHINES
THERMODYNAMICS
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
The wide presence of thermal plants in different specializations of industrial fields is compelling
Training Models
schools and training centres for a more and more efficient, fast and valid teaching.
Prodit range of reduced scale models concerning steam boiler plants, heat exchangers, internal
combustion engines, compressors and other thermal plants have been designed to obtain maximum
instructional value.
All parts are moving in the correct manner and their dynamic function is clearly shown through
painting in contrasting colours. Fluids flowing paths are painted in contrasting colours too.
▸
SF15380309/E
pag.
32
Code: MO0205/000/8650
Training Models
MODEL (1:5) OF A HORIZONTAL SMOKE TUBES STEAM BOILER, ENBLOC TYPE COMPLETE
WITH SUPER HEATER AND ALL ACCESSORIES FOR AUTOMATIC OPERATION
The model perfectly reproduces a horizontal type smoke tubes steam generator (scale 1:5) enbloc type together with all its ancillary equipment.
It is reproduced in every details and thanks to a complete sectioning it is possible to show the internal constructive details. Fitted on a table
stand.
Options available:
• Model (scale 1:5) of a water pipes (vertical) steam boiler, enblock type complete with super heater and all accessories for automatic
operation;
• Model (scale 1:5) of a steam generator plant composed of diathermic oil boiler and heat exchanger for steam production and complete with
all accessories for automatic operation.
◂
pag.
33
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
STEAM GENERATOR MODEL WITH VERTICAL WATER TUBES AND TWO CYLINDRICAL
BODIES
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
The model is realized detailing the most significative parts to show the components and the construction details of a modern water tubes steam
boiler. Particularly the convection zone, the radiation zone and the stack are clearly visible.
Code: MO0205/000/017A
Gas turbine engines power most modern passenger and military aircraft: they are also called jet engines. The simplest type of gas turbine is the
turbojet large quantities of surrounding air are introduced into the engine intake.
Then air enters in the compressor and receives an increase of its pressure. At the exit of the compressor, the very high pressure air is introduced
into the burner where it is mixed with fuel and ignited. Leaving the burner, the hot exhaust gas crosses the turbine that operates like a wind mill.
At the end flow crosses the nozzle, which is shaped to accelerate the flow itself and the thrust is generated by the difference in speed between
nozzle outlet speed and free stream flow velocity (that is at lower pressure than flow exiting turbine).
The model is accurately sectioned and sections clearly shows: air intake, low and high pressure compressor, burner, low and high pressure
turbine, propelling nozzle and starting igniter.
Code: MO0206/000/8350
▸
SF15380309/E
pag.
34
Shell-and-tube heat exchanger are the majority of the unfired heat transfer equipment in various chemical, thermodynamic and refinery
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
processes. Their knowledge is fundamental in training and education. Scaled models, highly detailed, are valuable tools in teaching the
operation and maintenance of these equipment.
The designation of convectional shell-and-tube heat exchangers by number and letters has been established by the Tubular Exchanger
Manufactures Association (TEMA) and our models are reflecting their design standards together with the ASME ones.
Models are completely disassemblable and are fitted with simulated gaskets, The clear acrylic shell allows to visualise the construction, the
simple part details, the operating principles of these common pieces of process equipment.
Training Models
Code: MO0214/000/032
◂
pag.
35
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Shell-and-tube heat exchanger are the majority of the unfired heat transfer equipment in various chemical, thermodynamic and refinery
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
processes. Their knowledge is fundamental in training and education. Scaled models, highly detailed, are valuable tools in teaching the
operation and maintenance of these equipment.
The designation of convectional shell-and-tube heat exchangers by number and letters has been established by the Tubular Exchanger
Manufactures Association (TEMA) and our models are reflecting their design standards together with the ASME ones.
Models are completely disassemblable and are fitted with simulated gaskets, The clear acrylic shell allows to visualise the construction, the
simple part details, the operating principles of these common pieces of process equipment.
Code: MO0214/000/031
Shell-and-tube heat exchanger are the majority of the unfired heat transfer equipment in various chemical, thermodynamic and refinery
transfer equipment in various chemical, thermodynamic and refinery processes. Their knowledge is fundamental in training and
processes. Their knowledge is fundamental in training and education. education. Scaled models, highly detailed, are valuable tools in
Scaled models, highly detailed, are valuable tools in teaching the teaching the operation and maintenance of these equipment. Models
operation and maintenance of these equipment. Models reflect design reflect design standards of TEMA and ASME. They are completely
standards of TEMA and ASME. They are completely disassemblable disassemblable and are fitted with simulated gaskets. The clear
and are fitted with simulated gaskets. The clear acrylic shell allows to acrylic shell allows to visualise construction, simple part details and
visualise construction, simple part details and operating principles of operating principles of these common pieces of process equipment.
these common pieces of process equipment. U-tube heat exchanger is realized for CFU configuration.
Internal-floating-head heat exchanger is realized for AES
configuration. Code: MO0214/000/033
▸
Code: MO0214/000/030
SF15380309/E
pag.
36
DP01
DESIGN AND
UNDERSTANDING
TECHNOLOGY FOR
FLUID MACHINES
THERMODYNAMICS
The proposal of DP “Drawing and Design” teaching aids is intended to suit students with basic
technical knowledge with the aim to give them the basic technological capacity and instructions
relevant to daily used technical apparatus.
There is now wide agreement that the central mission of schooling is to develop lifelong learner -
Design and Understanding Technology
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
individuals who are motivated to continue learning and who have the basic skills to do so.
To encourage lifelong learning, the continued learning skills curriculum domain includes such
standard plans as instructions in reading, listening, viewing, understanding, thinking about and
speaking using various information - retrieval systems including those made possible by analizing
real technical components such as machines or parts of them, automatism and instruments, selecting
alternatives, trying out ideas, and other problem solving skills.
Prodit has designed various teaching aids which have a great instructional validity such as
particularly interesting versions of technological components and assemblable mechanical units
suitable to upgrade the basic skills in mechanical and science technology.
To prevent leakage of a liquid between two moving parts where there is friction and consequent wear
by means of a form of seal is a standard recurring problem to an engineer, whatever of these fields
he is dealing with: automotive, hydraulics, pneumatics, mechanics, etc.
Yet, every day specifications for modern machines demand more power, greater speed, long running
life, higher pressure and all of which, in turn, present a mandate for new materials, improved design
and better methods of sealing.
Prodit presents different kind of seals, mainly divided in static seals (where sealing takes place
between surfaces which do not move relative to one another) and dynamic seals (where sealing take
place between surfaces which have relative movement).
These teaching aids help the student to gain confidence in choosing the best sealing for a given
application and about their correct assembling.
▸
SF15380309/E
pag.
38
LIP RING SEALS ON ROTATING SHAFT FOR LOW AND MEDIUM PRESSURE
Static and dynamic mechanical seals for mechanics training
The mechanics teaching aid is actually composed by a double unit: one can be assembled and disassembled by students while the other is
sectioned to show correct assembling.
Lip ring seals are suitable for mineral and hydraulic oil, lubricating oil for transmission, lubricating grease and one usually used for bearings.
One seal is used for low pressure (0.1÷0.2 bar max) and the other for medium pressure (7 bar max). An explanatory plate is supplied to
underline typical uses, specifications and technical drawing. The correct assembling of the relevant mechanical parts is clearly shown.
Code: DP01UN/100/001
This educational unit clearly shows the following two kinds of seals:
a) DP01UN/100/002A
Lip ring seal on rotating shaft for installation in dirty places
b) DP01UN/100/002B
Seal on rotating surface with frontal seal
The didactical unit is actually composed by a double unit: one can be assembled and disassembled by students while the other is sectioned for
didactical purposes. The lip ring seal on rotating shaft suitable for mineral lubricating oil, is projected for installation in dusty places and is kept
automatically clean by a small leakage: its working pressure is 0.1bar max. The seal on rotating surfaces with frontal seal, suitable for water or
clean lubricant, is suitable for centrifugal pumps and for a working pressure 0.5 bar max. The unit is complete with an explanatory plate that
includes typical uses, drawing and assembling notes of the relevant mechanical parts.
SF15380309/E
Code: DP01UN/100/002
◂
pag.
39
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
This teaching aid clearly demonstrates the following two kinds of seals:
a) DP01UN/100/003A
Labyrinth seal on rotating shaft
b) DP01UN/100/003B
Packed gland seal on rotating shaft
The unit is actually composed by a double unit: one can be disassembled and assembled by students while the other is sectioned to allow
students to understand correct assembling. The labyrinth seal is suitable for lubricating oil in that field of applications where high speed shafts
are required. The packed gland seal is used in water pumps at a working pressure of 15 bar max. Unit is complete with an explanatory plate
including field of applications, technical specifications, drawings and assembling notes.
Code: DP01UN/100/003
This educational unit clearly shows the following two kinds of seals:
a) DP01UN/100/004A
Seal on rotating shaft with front sliding surface and o-ring static seals
b) DP01UN/100/004B
Seal on rotating shaft with front sliding surface and static seals with forced bushing
The didactical unit is actually composed by a double unit: one can be assembled and disassembled by students while the other is sectioned to
show correct assembling. The seals are suitable for mineral lubricating oil, oil for hydraulic controls and lubricating grease and are usually used
for bearings. The seal with front sliding surface and o-ring static seal can be used up to 0.1÷0.2 bar while the seal with front sliding surface and
static seals with forced bushing can be used up to 7 bar. An explanatory plate is supplied to highlight typical uses, specifications and technical
drawing showing in particular seals correct assembling on the shaft.
▸
SF15380309/E
Code: DP01UN/100/004
pag.
40
The didactical aid is actually composed by a double unit: one can be assembled and disassembled by students while the other is sectioned to
show correct assembling.
The felt type seal on rotating shaft is suitable for mineral grease in absence of fluid pressure.
Complete with explanatory plate to underline working conditions, technical drawings and correct assembling.
Code: DP01UN/100/005
The mechanics teaching aid is actually composed by a double unit: one can be assembled and disassembled while the other is sectioned for
didactical purposes. The seals on double-acting cylinder, suitable for filtered and lubricated air and for oleodynamic drives, are generally used
in hydraulics and pneumatics fields. They can work up to a pressure of 100 bar. The unit is supplied complete with an explanatory plate to
underline working conditions, technical drawing and correct seals assembling on the shaft.
Code: DP01UN/101/001
SF15380309/E
◂
pag.
41
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
SEAL ON SINGLE-ACTING CYLINDER AND CYLINDER ROD WITH A SIMPLE LIP GASKET
Set of mechanical axial sliding dynamic seals
Design and Understanding Technology
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
This teaching aid clearly shows the following two kinds of seals:
a) DP01UN/101/002A
Seal on single-acting cylinder with a simple lip gasket
b) DP01UN/101/002B
Seal on cylinder rod with a lip gasket complete with scraper ring
The unit is actually composed by a double unit: one can be assembled and disassembled while the other is sectioned to allow students to
understand correct assembling. The seals on single acting cylinder, suitable for filtered and lubricated air and for oleodynamic drives, are
generally used in hydraulics and pneumatics field. The working pressure is up to 70 bar. The didactical unit is complete with an explanatory plate
including typical uses, specifications and assembling drawings.
Code: DP01UN/101/002
SEALS ON DOUBLE-ACTING CYLINDER AND CYLINDER ROD WITH LIP GASKETS FOR
LOW PRESSURE
Set of mechanical axial sliding dynamic seals
This teaching aid clearly illustrates the following two kinds of seals:
a) DP01UN/101/003A
Seal on double-acting cylinder with a lip gasket for low pressure
b) DP01UN/101/003B
Seal on cylinder rod with a lip gasket for low pressure
The unit is actually composed by a double unit: one can be assembled/disassembled while the other is sectioned for didactical purposes. The
seals, suitable for filtered and lubricated air, are generally used in pneumatics field. The seal on double-acting cylinder can reach a working
pressure of 35 bar; the seal on cylinder rod can reach a working pressure of 25 bar. The unit is supplied complete with an explanatory plate to
highlight typical uses, drawings and correct assembling of the relevant mechanical parts.
▸
SF15380309/E
Code: DP01UN/101/003
pag.
42
This educational unit clearly shows the following two kinds of seals.
a) DP01UN/101/004A
Cylinder rod cleaner rings. Forced fixing
b) DP01UN/101/004B
Cylinder rod cleaner rings in a hollow seat
The didactical unit is actually composed by a double unit: one can be assembled/disassembled while the other is sectioned for didactic
purposes. The cylinder rod cleaners, suitable for dry working, are generally used in hydraulics and pneumatics fields: they work in absence of
pressure. The unit is supplied complete with an explanatory plate that underlines typical uses, working conditions and seals correct assembling.
Code: DP01UN/101/004
The unit is actually composed by a double unit: one can be assembled/disassembled while the other is sectioned to allow students to understand
correct assembling.
The seal on double-acting cylinder with gaskets and pressure ring, suitable for oleodynamic drives oil, is used for hydraulic cylinders that work
in heavy conditions.
The didactic unit is complete with an explanatory plate that highlights typical uses, working conditions and assembling drawings.
Code: DP01UN/101/005
SF15380309/E
◂
pag.
43
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
The unit is actually composed by a double unit: one can be assembled/disassembled while the other is sectioned for teaching purposes.
The seal on long-stroke cylinder, suitable for lubricated compressed air and oil for oleodynamic drives, is used in pneumatic cylinders and in low
pressure hydraulic cylinders.
The didactic unit is supplied complete with an explanatory plate to underline typical uses, drawings and correct assembling of the relevant
mechanical parts.
Code: DP01UN/101/006
The didactical unit is actually composed by a double unit: one can be assembled/disassembled while the other is sectioned for teaching
purposes.
The seal on cylinder rod with gasket in a hollow seat, suitable for lubricated compressed air and for oleodynamic drives oil, is generally used in
pneumatics and hydraulics fileds.
The unit is supplied complete with an explanatory plate to underline typical uses, working conditions and correct seal assembling.
Code: DP01UN/101/007
▸
SF15380309/E
pag.
44
The unit is actually composed by a double-unit: one can be assembled/disassembled while the other is sectioned for teaching purposes. The
o-ring seals are suitable for mineral lubricating oil, lubricating grease, air and water: the one projected for high pressure is not limited at 300 bar
max as the one for medium pressure. The didactical unit is supplied complete with an explanatory plate that underlines typical uses, working
conditions and seals correct assembling.
Code: DP01UN/102/001
This educational unit clearly illustrates the following two kinds of seals:
a) DP01UN/102/002A
O-ring seals on flat flange in a hollow seat
b) DP01UN/102/002B
O-ring on flat flange in a conical seat
The unit is actually composed by a double unit: one can be disassembled/assembled while the other is sectioned for didactic purposes. The o-
ring seals, suitable for mineral lubricant, mineral grease, air and water, are not limited by a particular working pressure value. The didactic unit
is complete with an explanatory plate that includes typical uses, drawings and assembling notes of the relevant mechanical parts.
Code: DP01UN/102/002
SF15380309/E
◂
pag.
45
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
This teaching aid clearly illustrates the following two kinds of seals:
a) DP01UN/102/003A
Seal on flat flange with a flat seal
b) DP01UN/102/003B
Seal on shaft or rods with packing gland
The unit is actually composed by a double unit: one can be assembled-disassembled and the other is sectioned for teaching purposes. The
seals can be used with different materials (it depends on the kind of materials the seal is made of). The seal on flat flange with a flat seal is not
limited by a particular working pressure while the seal on shaft or rods with packing gland is suitable for 10 bar max in order to preserve the rod
functionality. The didactic unit is complete with an explanatory plate that underlines typical uses, technical specifications and drawings showing
the correct seals assembling.
Code: DP01UN/102/003
▸
SF15380309/E
pag.
46
AV1505
AUDIOVISUAL AIDS FOR
FLUID MACHINES
THERMODYNAMICS
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Teaching is a very important activity that requires a great deal of effort from teachers and instructors
to make it easy to understand from students the subject of lessons.
Audiovisual Aids
A large part of time is spent by teachers to make understandable the concepts and the theory written
in the texts used in the courses.
Audiovisuals represent a teaching aid both for teachers and students; the former can show the
application of a law or the operation of a machine the latter have the opportunity to review lessons
or have better examples of a phenomenon without interrupt the teacher.
To make audiovisuals useful they have to be available in a wide choice and to be continuously
updated to match the technological development.
Prodit provides not only the teaching aids to help the teachers and students in their tasks but also
the hardware to make it possible their use in the classroom.
▸
SF15380309/E
pag.
48
PERSONAL COMPUTERS
Audiovisual Aids
WIDE MONITORS
◂
pag.
49
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
LABORATORY PRINTER
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Create marketing materials with realistic color and crisp detail thanks to the easy print matching of PANTONE® Color.
Prints high quality at low cost from the start, with a full set of cartridges - containing on average almost twice as black toner and more than twice
as color toner compared to major competitors.
Print in black and white at low cost, thanks to an optional high-capacity black cartridge.
Important energy savings and paper.
• Reduce energy consumption by a percentage between 19% and 66% with Auto-On/Auto-Off, save even more energy with Instant-on
Technology, which reduces heating and cooling
• Save time with easy installation of the cartridges
Audiovisual Aids
• Resource and up to 50% of paper with the duplex printing / automatic duplex
• Print in black and white with low cost
This versatile and economical A3 desk color printer meets all the needs of business printing, from postcards to large format documents.
For small workgroups that need a versatile printer for all printing needs, from spreadsheets, marketing materials, presentations for customers
to large format documents.
▸
SF15380309/E
pag.
50
PLOTTER
Code: MA0922/J03/002A
Audiovisual Aids
Available in different type: 8, 16, 32 and 64 Gb Characteristics according to the latest market technologies.
◂
pag.
51
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
HARD-DISK HUB
Available in different storage capacity. Available in different version and several usb connections.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Characteristics according to the latest market technologies. Characteristics according to the latest market technologies.
Not only does this DVD/VCR combo play DVDs and VHS tapes, it
Characteristics according to the latest market technologies.
also copies your favourite VHS tapes to DVD.
As well as being compatible with DVD and VHS, this DVD/VCR
Code: AV15UN/A42/013 combo works with MPEG4 and DivX formats stored on USB-enabled
devices. Upscaling enhances the quality of content to near 1080p
Full HD.
▸
SF15380309/E
The U-Pointer ™ is a tool that converts the image projected on a The multimedia interactive board kit includes in the supply: 1
workstation interactively. The U-Pointer ™ can be mounted vertically videoprojector, 4 pen, 1 eraser, SMARTBoard™ software, wall
or horizontally, adapting to user needs and transforms the physical bracket with arm for data show, and support for wall mounting.
surfaces in interactive surfaces that allows users to have an A computer (not included) is connected to the multimedia interactive
interactive whiteboard in the position they prefer. U-P Allows you to board and to the data show.
capture, annotate, and distribute ideas quickly. U-P Improves the By simply touching with a finger the surface of the multimedia data
majority of programs screen sharing. board it is possible to fully manage all the computer applications,
The integrated software I-Pro is a software that can enhance and brows the web, and the email.
multiply the qualities of U-Pointer. You can write, draw, aggregate Board surface designed to allow finger writing.
content, combining them to present and record audio and video The multimedia interactive board can be connected to the computer
Audiovisual Aids
recording of the entire presentation. I-Pro is compatible with most by a USB cable only.
remote presentation software, allowing you to extend the activities
carried out locally at each site accessible from internet. Code: AV15UN/A40/012A
Code: AV15UN/A40/020A
Portable, compact and easy to use, the video projector is available Designed for projection of transparencies, it is high quality
for classroom, lecture theatres or conference room. the video presentation aid to satisfy educational and business applications.
projector can be connected to PC, workstation and various video
devices. The OHP is available in desktop type or portable A4 size.
Characteristics according to the latest market technologies. Accessories: wheeled stand, acetate sheets and felt pens.
◂
pag.
53
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
White screens (highly reflective) with hand operated tensioning Copy boards very useful when it is necessary to record the
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
device. presentations made during meetings or seminars; infact it is possible
to print on A4 format paper what is writen on the board.
Available in different sizes.
Adding accessories make possible to store the data on a PC or print
For further informations please ask for the relevant Technical them on a PC printer.
Description.
Code: AV15UN/A40/011
Code: AR05UN/A13/011 SERIES
Audiovisual Aids
To scan the geometric object to the high quality image. it is very Compact slide projector for best picture quality, available with or
useful for originals present. without remote control.
Code: AV15UN/A45/007
▸
SF15380309/E
pag.
54
A digital single-lens reflex camera is a digital camera combining the This ultra-lightweight digital camera features an extremely compact
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
parts of a single-lens reflex camera and a digital camera back, design and exceptional performance.
replacing the photographic film. The camera has a wide range of shooting modes - from wide-angle
The reflex design scheme is the primary difference between a digital to telephoto movies recording.
single-lens reflex camera and other digital cameras. The camera has a built-in speaker and a stereo microphone.
In the reflex design scheme, light travels through a single lens and a The three microphone modes ensure a clear and precise recording,
mirror is used to reflect a portion of that light through the view finder thanks to the ambient noise reduction system.
- hence the name Single Lens Reflex. This compact digital camera allows to take photos easily, even while
recording video, without having to interrupt the shooting session.
The image that is seen through the view finder is also the image that
is captured by the camera’s sensor. Characteristics according to the latest market technologies.
Audiovisual Aids
Characteristics according to the latest market technologies.
Code: AV15UN/A43/015A
Code: AV15UN/A40/018B
WEB CAM
• Built-in microphone
• Universal clip fits laptops, LCD or CRT monitors
• Snap-shot button
• Manual focus adjustment
• Integrated USB cable
Code: AV15UN/A43/009A
SF15380309/E
◂
pag.
55
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
COLOUR SCANNER
This versatile photo scanner delivers 4800 x 9600 dpi optical resolution for incredible detail and clarity, whether scanning photos or documents.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Create brilliant enlargements or scan photo albums, books and more with the 180-degree lid.
The scanner also offers powerful Document Capture software so you can easily scan directly to cloud services like Google Docs, MS
SharePoint®, Evernote® and more. It also offers one-touch buttons for scan-to-email, copy and PDF.
Plus, use photo restoration to bring those faded family photos back to life.
You can also scan oversized artwork or photo album pages with dedicated software.
▸
SF15380309/E
pag.
56
MA0905
MACHINES FOR
FLUID MACHINES
THERMODYNAMICS
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
A great deal of time in vocational and technical training is devoted to workshop and laboratory
activities in which the trainees perform a series of drills according to the field of disciplines such as:
assembling and disassembling of an engine, repair of an electronic apparatus and so on.
For all these tasks are needed a specific series of tools, power tools, machineries, instruments and
Machines
A basic phase of the training programme is to acquire the knowledge of how to choose the right “tool”
for the specific job.
Prodit has made available a very complete list of tools, power tools, machineries, instruments and
accessories used in all the field of vocational and technical training which are made with high quality
material through a manufacturing process that guarantee the highest standard.
This is a further certainty for our client to have reliable and long lasting products.
▸
SF15380309/E
pag.
58
These pumping units are widely used to meet the water deficiencies of networks which are unable to provide sufficient water.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Machines
Code: MA0903/G04/001 SERIES
Designed for long lasting due to the driving system without worm screws, the portable threading machine can thread for hours without
overheating, straining of the motor or wearing of the driving system components.
The reverse gear is mechanic, too; thus preventing harmful reversals of the motor. Furthermore, the reverse speed is double than the threading
speed and enables a higher working speed.
For further information please ask for the relevant Technical Description.
◂
pag.
59
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Hot air welding device. •Double action spindle; •Pistol grip handle with speed variator;
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Suitable for PVC welding. •Locking device to hold constant speed; •Reverse rotation switch;
•Small drum dimensions; •Water-proof and dust-proof drum; •Quick
Available in different versions. and easy tool connection.
For further information please ask for the relevant Technical Powerful and easy-to-handle cleaners have a compact gear-
Description. reduced, double insulated motor with a reversing switch.
- Cleaner for pipe dia.: 30÷75 mm
Code: MA0903/F07/004 SERIES Supplied with a complete set of accessories. Available in different
versions.
For further information please ask for the relevant Technical
Description.
Compact versatile, professional’s machine. Heavy duty band saw designed and manufactured with high rigidity
of the blade support, band stretching device, flywheel and band
Suitable to clean pipe from 1” 1/4 up to 4”, with maximum length of guides oversized to avoid yielding of the band, increase its durability
30 meters. and improve linearity and time of cutting. The band saw is equipped
• Pull handle down and cable spins at 400 rpm with a two speed motor with gear type reducer. The band stretching
• Release handle, cable stops-instantly is obtained by electro-mechanical blade tensioner with microswitch.
The machine is complete with safety devices for accident-
Supplied complete with: •Six sections of cables; •Cable carrier; prevention.
•Straight Auger; •Bulb Auger; • “C” cutter; •Spade cutter; Available models with cutting capacity from 220 MM up to 290 MM.
•Coupling pin key; •Rear guide hose; •Left-hand mitt. For further information please ask for the relevant Technical
Description.
For further information please ask for the relevant Technical
Description. Made in European Community.
▸
Code: MA0903/U68/002 SERIES Code: MA0909/E09/001 SERIES
SF15380309/E
pag.
60
Circular cut-off sawing machine for metals or other materials. Portable heavy duty electric pipe cutting machines, supplied
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Versions available include cut-off machines for square cut or mitre complete with the blade.
cut. Cutting wheels metallic or abrasive disk type. This guide makes it possible to perform orthogonal cutting even
without using the clamp.
For further information please ask for the relevant Technical
Description. For further information please ask for the relevant Technical
Description.
Made in European Community.
Machines
Heavy duty angle grinding/cutting machine, complete with Portable single-seat self-operated fume suction unit complete with
autolocking for grinding disk replacement, handle and grinding disk cartridge. Easy to be used and positioned nearby each single
cover. welding area to intake all welding fumes. The aspirator is
characterized by its low noise level and high filtrating efficiency. The
Versions available cover a wide range of machine power and wheels unit, which is made of strong metal sheet, is equipped with a filtering
diameter cartridge and also an activated carbon cell.
- Filtering area: 10 m2 approx
For further information please ask for the relevant technical - Flexible hose length: 3 m
description. Spare filters are available.
◂
pag.
61
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Available with different motor and spindle speed, drilling capacity up Column drilling machine with rising table with “T” slots and vertical
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
to 16 mm with fixed table or rotary table vice unit. movement of the table by means of a working wheel gear. The
column drilling machine is available in a wide range of drilling
For further information please ask for the relevant Technical capacities (from 16 mm up to 40 mm or more), supplied complete
Description. with accessories according to the relevant version.
Options available:
•Column drilling machine with 1 range of four spindle speed;
Code: MA09UN/E03/003 SERIES •Column drilling machine 2 speed motor (8 spindle speed); •Column
drilling machine with tilting table; •Column drilling machine with gear
box.
For further information please ask for the relevant Technical
Description.
Double-ended pedestal grinders are needed in every workshop because of tools such as drills, lathe cutting tools, scribers and cold chisel
requires frequent sharpening by means of a grindstone. Double-ended grinder can be supplied both as bench model or as pedestal model. The
grinding wheel on one side is frequently removed and replaced with a polishing pad.
Powerful, silent and reliable grinding machine, equipped with safety devices for safe operation.
Supplied complete with grinding wheels and protection goggles.
Versions available are suitable for a wide range of different size grinding wheels useful for polishing, grinding and buffing.
Options available:
- Bench grinding machines, complete with wheel guards and eye shields.
- Column grinding machines, complete with pedestal and removable tray for tools cooling.
For further information please ask for the relevant Technical Description.
- Grinding range: from 5 mm up to 40 mm They are complete with chuck keys, additional handle and depth
- Drill angle: 118° adjusting device.
- Rake angle: 0°-15°. Versions available cover a wide range of drill power and chuck
Supplied complete with following standard accessories: •tool holders diameters.
for diameters from 5 to 40 mm; •grinding wheel dresser complete
with diamond; •cup grinding wheel; •chamfer wheel; •safety goggles; Options available:
•service tools. •single speed reversible percussion drill; •two speed percussion drill;
•variable speed reversible percussion drill.
For further information please ask for the relevant Technical
Description. For further information please ask for the relevant technical
description.
Made in European Community.
Code: MA09UN/E25/037 SERIES
Machines
Code: MA09UN/E11/002 SERIES
PORTABLE AC WELDERS
Single-phase (AC) portable arc welding machines with coated electrode (Manual Metal Arc) - Smaw. Sturdy construction and very ease use.
Equipped with thermostatic protection and stepless regulation of welding current.
Available models with current range from 40 A to 250 A in ventilated version or wheeled type.
For further information please ask for the relevant Technical Description.
◂
pag.
63
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Series of heavy duty combined type machines suitable for grinding motor through a V-belt for a long standing service. Complete with
and polishing. pressure switch, with START/STOP push-button, handle, safety
Column type units that are available with single phase or three phase valve, pressure reducer, drain cock, line cock and belt guard. Two
power supply. cylinders compressors, complete with air intake manifold, and
Wheel sizes of available models vary from 150x20x16 mm up to flywheels with ventilation facilities. Hardened steel disc valve assure
300x40x30 mm. high air-delivery and perfect balancing giving vibration-free running.
The unit can afford long periods of maintenance-free operation,
For further information please ask for the relevant Technical assured through accurate factory tests. Versions available cover a
Description. wide range of tank capacities from 24 litres up to 400 or 1000 litres
and compressor capacities.
Made in European Community. Options available:
- Floor standing, wheeled and on feet air compressor.
- Single stage, two stage and twin type air compressors.
Machines
▸
SF15380309/E
pag.
64
ST1005
INSTRUMENTATION FOR
FLUID MACHINES
THERMODYNAMICS
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
A great deal of time in vocational and technical training is devoted to workshop and laboratory
activities in which the trainees perform a series of drills according to the field of disciplines such as:
assembling and disassembling of an engine, repair of an electronic apparatus and so on.
Instrumentation
For all these tasks specific series of tools are needed, power tools, machineries, instruments and
accessories to be choosen among the wide number of types available.
A basic phase of the training programme is to acquire the knowledge of how to choose the right “tool”
for the specific job.
Prodit has made available a very complete list of tools, power tools, machineries, instruments and
accessories used in all the field of vocational and technical training which are made with high quality
material through a manufacturing process that guarantee the highest standard.
This is a further certainty for our client to have reliable and long lasting products.
▸
SF15380309/E
pag.
66
A variety of U-tube manometers available with both, glass tube or Adjustable slope manometer to measure the differential air pressure.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Instrumentation
A variety of multitude pierometers with manifold pressurization pump A variety of boards with rank of piezometric tubes of various length
to be used for pierometric head determination in hydrostatics and to be connected to various laboratory equipment for measurement
hydrodynamics experiments. and test.
Available option include: Boards are available both as vertical tubes type or suitable to be
- 14 tubes multimanometers, standard height inclined at different angles in order to increase the low pressure
- 4 tubes multimanometer, long-type sensitivity.
- 2 tubes multimanometer, long-type
and many others. Code: ST33UN/S17/025 SERIES
◂
pag.
67
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Precision air velocity instrument used to balance air conditioning systems, measure pressure drop across filters, and test fan and blower
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
discharge and inlet pressures, as well as air velocity in ducts. High accuracy on easy-to-read scales. A versatile, all around manometer for the
air conditioning and balancing jobs or industrial plant.
- Carrying Case
Ultra light flow measuring hood able to deliver fast and accurate air volume measurements directly in m3/hour, liters/second or cu ft/min. With
a digital display easy to read, the apparatus is factory calibrated to ensure accurate readings in both supply and return air measurements. Five
different hood sizes provide the versatility for measuring air volume in almost any size diffuser or grille.
Accuracy is assured through a free certificate of NIST traceability. Complete with a convenient compact carrying case that makes it easy to
transport and store hood and its accessories.
For further information please ask for the relevant Technical Description.
Code: ST1000/S10/001
▸
SF15380309/E
pag.
68
Steel bourdon tube with brass tip and socket. Precision manometers are composed by a stainless steel case with
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Special hard brass movement. Plastic or glass dial window. Metal elastic element made in beryllium copper.
case.
They are suitable for use in laboratories or in the field with safety
Designed for use on air, water, oil or other pressure mediums that will shock-proof bottom.
not deteriorate brass.
Versions available cover a wide range of different measurable
Accuracy ±3% full-scale and accuracy ±1% full-scale. pressures.
Available in different sizes and ranges. For further information please ask for the relevant Technical
Description
Instrumentation
For further information please ask for the relevant Technical
Description.
Code: ST10UN/S17/018 SERIES
Code: ST10UN/S17/013 SERIES
Manometers with inclined tube suitable for small pressure variations measurement, on wood.
Base completed of: tube with tank, bubble level and aluminium.
For further information please ask for the relevant Technical Description.
◂
pag.
69
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Designed for use with air, water, oil or other pressure medium.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Bourdon tube type with special movement. Metal case.
Various types with different vacuum and pressure ranges and scale divisions.
Code: ST10UN/S17/010
▸
SF15380309/E
pag.
70
The paddle wheel turbine type flow monitors and transmitters are Propeller type meter suitable to measure the flow rate of various
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
designed to convert the signal from flow sensors into a display liquids.
indication and a 4...20 mA signal for long distance transmission.
Remote reading of the flow rate through a 4÷20 mA signal.
A very simple and complete choice of options are granted by single
or dual input/output, one open collector output and two optional open Code: ST10UN/S17/016 SERIES
collector or relay outputs.
Instrumentation
•auto-calibration.
◂
pag.
71
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
capacity from small flow to large ones. Suitable to be used for water, A variety of variable area flowmeters fitted on calibrated orifices in
air or other fluids. order to give the instantaneous measure of the water flow rate.
Generally calibrated from 10% to 100% of the total capacity. Flange type mounting, easy to install.
Different connections available flange type or screw type. Suitable for large flow measurement.
Available with or without control valve. Vertical mounting. Code: ST10UN/S17/020 SERIES
Transducers with internal measurement diaphragm designed to These flowmeters are variable area measuring instruments providing
monitor and control the pressure of fluids or gase with stainless steel inexpensive and accurate measurement of flow rates for liquids and
sody. gases. The instruments are equipped with PVC measuring tube,
PVC unions and float.
Available with pressure range from 0-10 to 0-1000bar; entirely in All flowmeters are fitted with max-min set points which are fully
stainless steel; internally generated calibration signal; output 4-20 adjustable. The flow rate can be directly read on the scale. In
mA signal. For measurement ranges below 50 bar a specific addition to visual indication the flowmeters may be fitted with
pressure fitting minimizes zero error due to tightening. The selection minimum - maximum switches or transmitters. When fitting electrical
of highly stable electronic components availability of three separate accessories please make sure that a magnetic float is installed in the
precision classes, make these transducers suitable and versatile for flowmeter.
use in a variety of industrial sectors and laboratories. Available in different type and flowrate.
For further information please ask for the relevant Technical
Code: ST10UN/S17/023 SERIES Description.
▸
Code: ST1003/S17/002 SERIES
SF15380309/E
pag.
72
Turbine (paddle wheel) meter suitable to measure the flow rate of Quartz, timer and normale time (hours, minutes, seconds, days,
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Remote reading of the flow rate through instrument that converts the Resolution: 1/100”
turbine revolution pulse frequency into a flow rate indication.
Code: ST10UN/S28/008 SERIES
Code: ST10UN/S17/017 SERIES
Instrumentation
The electronic portable thermometer, complete with data hold function, is designed to be used for several applications in combination with
various probes, suitable for gas, fluid or surface measurement.
The instrument is complete with autopower off, max/min, autorange and low battery indication functions.
Options available: •Industrial portable thermometer; •Industrial portable thermometer with probes set
For further information please ask for the relevant Technical Description.
◂
pag.
73
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Portable industrial thermometer for measuring temperature in the The instrument is composed of two thermometers out of which one
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
most common industrial environments. Available versions cover is dry bulb type and the other is wet bulb type and it operates by
various temperature ranges. manual rotation. The psychrometer is supplied in a containing box,
complete with a conversion table for temperature humidity. Versions
Options available: •Glass thermometer with shock protection; available cover different operating temperatures.
•glass thermometer with metal cover and clips; •window glass
thermometer; •wall glass thermometer; •wall minimum-maximum Available options: •Sling type psychrometer; •Table/wall type
glass thermometer. psychrometer; •Weather Station type psychrometer; •Assman
psychrometer
Code: ST10UN/S57/013 SERIES
Further information please ask for the relevant Technical Description
Instrumentation
Fan type portable anemometers suitable to measure air speed on Precision instruments to measure windspeed with instantaneous
both ducts or outlets. reading.
Digital display of air speed with possibility to read in m/s, km/h, f/min, Display of speed in m/s, knots, km/h, Beaufort, etc. on digital or dial
etc. type instrument according to the model chosen.
Instrument used also for tests of fans and suction systems.
Options available include:
Available options include:
• Hand held cup anemometer
• Various speed ranges from 0.25 m/s to 30.0 m/s or 40.0 m/s • Determination of wind direction
according to the model
• Various probes allowing measurement in difficult locations.
Code: ST10UN/S10/007 SERIES - ST10UN/S10/028 SERIES
▸
SF15380309/E
pag.
74
Instrumentation
Multi-function measuring instrument for A/C, ventilation and indoor air quality.
This is a rugged and reliable measuring instrument equipped with a large illuminated display for easy and fast readings.
The instrument is very versatile, can be connect to different probes for air parameters measurements.
The probes are not included with this instrument, see optional accessories.
Available options: •Flow probes;•Hot wire probe; •Surface temperaure probe;•IAQ probe;•Infrared printer; •Carrying case.
For further information please ask for the relevant Technical Description.
◂
pag.
75
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
- measuring range with temperature probe: -50 to +1000°C
(NiCr-Ni).
Air temperature and humidity are recorded simultaneously, with the Dial type hygrometer suitable for measuring the ambient-humidity
use of inked styluses which make tracings on a sheet of graph paper percentage, covering a range from 5 up to 100% RU.
wound round a rotation drum. Ideal in the metereological and Available as wall mounting or desktop instrument.
industrial test of temperature and humidity, in air conditioned room, The sensor element uses a precise hair movement to assure
creamery, packing plant, pasta factory, floriculture chemical and accuracy and calibration stability.
textile rooms. The temperature-sensitive element is bi-metallic; the Measuring range: from 5% to 100% of relative humidity.
humidity-sensitive element is a hair-type hygrometer, the two
sensitive elements expand or contract depending on the humidity Available options include: •thermo-hygrometer - round dial type.
and temperature variations: a lever system transmits this movement Suitable for wall mounting. Temperature range: -20 ÷ +40°C, relative
to the stylus which traces the fluctuations on a clockwork-driven humidity range: 10 ÷ 100% RH.
drum. The recording can be chosen daily or weekly.
•hygrograph: 0 ÷ 100%; •thermometer: 0 ÷ +40°C.
Code: ST10UN/S10/020 SERIES
Code: ST10UN/S10/001 SERIES
▸
SF15380309/E
pag.
76
Instrumentation
TORRICELLI BAROMETER
Suitable to measure the atmospheric pressure in laboratories and workshop where this data is needed to perform experiments.
Barometers with mercury column mounted on wooden base.
These high accuracy instruments can be equipped with thermometer or supplied with barometer only.
FORTIN BAROMETER
Fortin type barometer with variable volume mercury cup and mercury level collimation point. High accuracy
instrument suitable for industrial field applications.
- Mercury column inside dia. 15 mm
- Range: 500 - 800 mm Hg, 680 - 1070 mb
- Mercury weight: 1.9 kg
ANEROID BAROMETERS
Suitable to measure the atmospheric pressure in laboratories and workshops where this data is needed to
perform experiments.
Available in the following versions:
• Aneroid barometer. High-quality, 3 1/2” dial calibrated in inches of mercury, centimeters and millibars.
Designed with an easel back for desk use and a hanging loop for wall mounting.
• Demonstration aneroid barometer. As the previous one with exposed movement that shows the actual
operation as air pressure is changed artificially by squeezing the attached rubber bulb.
BAROGRAPH
Instrument designed for recording atmospheric pressure conditions suitable both for weather stations and
industrial applications.
Instrument with recording function of atmospheric pressure on diagrammed paper by pen. The sensor consists in a set of nine sylphon bellows
overlapped and compensated. The diagram paper drum winding operates
by means of clock movement with daily or weekly rotation.
Supplied complete with: •pens; •diagram sheets.
- Measuring range: 80 Tor
- Precision: 1 mm/Tor
Available consumable include: •spare pens;
•diagrammed papers.
SF15380309/E
Digital revolution meters suitable for both no-contact and contact Data recorders are suitable to collect different signals and to store
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
test. them for displaying or printing.
Automatic storage of the last minimum value and of the last
maximum value. Liquid crystal display. A useful application may be the store of samples relevant to
Supplied complete with cone and tangential contact wheels for temperature, humidity or dew point values measured.
contact revolution speed measurement.
Options available: •videographic recorder complete with data
Option available: acquisition s/w; •circular chart recorder-single pen or multiple pen
•Digital Revolution meter NO-CONTACT type; •Digital Revolution programmable data logger.
meter suitable for both contact and no-contact measurements
For further information please ask for the relevant Technical
Instrumentation
Further information please ask for the relevant Technical Description Description
Line noise suppressor to protect computers and electronic systems against high frequency interferences and voltage spikes.
For further information please ask for the relevant Technical Description.
▸
SF15380309/E
pag.
78
Instrumentation
DIGITAL MULTIMETER
These are digital multimeters with many useful functions and features which are indispensable for electrical and electronic measurement (true
RMS measurements, frequency, AC voltage and temperature).
Bench-top digital multimeters, for use in general electronic maintenance, production and laboratory.
◂
pag.
79
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
These electrodynamics electronic controlled voltage regulators are characterized by high efficiency.
They are completely unaffected by power factor, and load variations.
They can withstand high instantaneous overloads and have a good control even with ±5% frequency variations.
Available versions cover a wide range of different power regulation is specific from 2 up to 10 kVA or more, according to input voltage variations.
For further information please ask for the relevant Technical Description.
▸
SF15380309/E
pag.
80
AC1105
ACCESSORIES AND
COMPLEMENTS FOR
FLUID MACHINES
THERMODYNAMICS
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Accessories and Complements
A great deal of time in vocational and technical training is devoted to workshop and laboratory
activities in which the trainees perform a series of drills according to the field of disciplines such as:
assembling and disassembling of an engine, repair of an electronic apparatus and so on.
For all these tasks are needed a specific series of tools, power tools, machineries, instruments and
accessories to be chosen among the wide number of types available.
A basic phase of the training program is to acquire the knowledge of how to choose the right “tool”
for the specific job.
Prodit has made available a very complete list of tools, power tools, machineries, instruments and
accessories used in all the field of vocational and technical training which are made with high quality
material through a manufacturing process that guarantee the highest standard.
This is a further certainty for our client to have reliable and long lasting products.
▸
SF15380309/E
pag.
82
This manual pump is particularly suitable for plumbing and solar panel installation fitting.
For further information please ask for the relevant Technical Description.
Hand threaders for steel pipes, ideal for every plumbor’s exigency.
Available in different versions, covering a wide range of threads from 1/2” up to 2”.
For further information please ask for the relevant Technical Description.
Including socket for die cheasers, ratchet, handling bar; extension and adapter according to the version chosen. Metal box for component
storage.
◂
pag.
83
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Vices designed to facilitate pipes positioning. with forged and jaws.
For further information please ask for the relevant Technical - Steel stand type
Description. - Workbench top type
Tools suitable for pipes working and swaging tools suitable for copper and light alloy pipes.
Options available:
- tube expander - lever type for tubing expansion up to 42 mm;
- flaring tool suitable for creating 45° conical flared on ends pipes;
- swaging tools assortment, complete with clamp for pipes, punches and single-block punch for pies. (A containing box, inside in sheet steel,
is suitable on request).
For further information please ask for the relevant Technical Description.
▸
SF15380309/E
pag.
84
PIPE CUTTERS
Pipe cutters made in H.Q. steel or malleable cast iron, with adjustable handle, to cut steel and iron pipes. Complete with one cutting blade for
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Options available:
For further information please ask for the relevant Technical Description.
- Cast-iron steel body Two handle tube benders, suitable to be used with copper tubes,
- Hinged opening brass tubes, etc. Handles are sheated in thermoplastic resin. The
- 4 interchangeable wheels tube bender is designed to bend pipe up to 180°.
Options available:
Pipe cutter suitable for cast-iron, steel and some type of stainless - Two wheels precision type, in a wide range of pipe external
steel. Easy to use ever in close quarter. Four wheels assure perfect diameters (up to 10 mm) and bending radii (up to 42 mm).
tracking and clear cut. - Standard type, in a wide range of pipe external diameters (up to
The cut is obtained by oscillator movement from 90° to 110°. 14 mm) and bending radii (up to 42 mm).
Available in different sizes for tube diameter from 60 mm up to 356
mm ab. (2”÷12” ab.) For further information please ask for the relevant Technical
Description.
For further information please ask for the relevant Technical
Description. Code: AC11UN/U68/006 SERIES
◂
pag.
85
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
pipe wrenches
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Accessories and Complements
PIPE WRENCHES
Pipe wrenches made of chrome vanadium steel. Enamelled finish and polished head, with straight or bent jaws. Available in different max jaw
openings from 60 mm up to 105 mm.
For further information please ask for the relevant Technical Description.
Apparatus for milling cock seats Designed for quick, clean cuts through plastic pipe and tube.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Suitable for inside and outside seates. That cutter feature compound leverage ratchet mechanisms and
hardened steel blades. One-head operation produces quick, clean
Complete with brass cone and four millings dia. 3/8 - 1/2 - 3/4 - 1 Capacity: from 3 up to 63 mm
inches
For further information please ask for the relevant Technical
For further information please ask for the relevant Technical Description.
Description.
Code: AC1103/U68/002
Code: AC1103/U39/002
Handle spanner suitable for assembly/disassembly boiler resistor size 50x55 (hexagonal type).
For further information please ask for the relevant Technical Description.
◂
pag.
87
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Suitable to twist steel or other wires up to 1.6 mm dia. Body made of synthetic resin with steel blade.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
- Automatic spring return pattern Suitable for copper and light alloy pipes to remove outside and inside
- Diagonal cutter with cushion throad to hold cut wire burns and to remove sharp edge.
Accessories and Complements
Available options:
• tool bag plumbers in leather case, with assortments of 25 tools;
• tool bag plumbers in leather case, with assortments of 50 tools.
▸
SF15380309/E
pag.
88
Vice-grip adjustable pliers are available with different jaws and features.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Options available: •concave, jaws with wire cutter; •flat and parallel jaws standard and wide opening type; •one flat and one concave jaw; •C-
clamp type lock grip plier; •bending tool grip plier; •welding clamp grip plier; •long nose type; •axial type lock grip plier; •hose/tubing pinch-off
For further information please ask for the relevant Technical Description.
Options available:
- Plastic shanks with cock or with lever, to be mounted on lances or extensions.
- Lances with burner or hammer welder with propane soldering and brazing attachments connection.
- Extensions to be mounted on shank, each allowing to use different size of burners.
- Burners, available in different diameters to be used with all extension.
- Complete line of accessories for propane torches including rechargeable LP gas bottle, seal for cylinder connections and hose clip.
- Aeropropane set complete with accessories and carrying case.
For further information please ask for the relevant Technical Description.
◂
pag.
89
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Vernier Calipers
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Disk Micrometer for
Thread Measurements
Accessories and Complements
VERNIER CALIPERS
Vernier calipers useful to make very accurate measurements in mechanical applications. Manufactured in hardened stainless steel, standard
execution is with metric graduations while U.S. graduations is also available. Reading accuracy 0.1, 0.05, 0.02 mm according to the instrument
chosen. Standard length from 100 mm up to 200 mm (precision long caliper up to 3000 mm with standard or long jaws).
Options available: • Precision vernier caliper with locking screw and complete with case. Available in different measurement range; • No parallax
vernier; • Long type precision vernier caliper in different ranges (from 0÷250 mm to 0÷3000 mm); • Precision depth vernier caliper; • Dial calipers;
• Special calipers for gear, welding, tyres and other measurements.
Code: AC11UN/U59/039 SERIES
EXTERNAL MICROMETERS
Resistant hardmetal external caliper with 0.01 mm reading, supplied complete with case.
Options available:• External micrometers with spindle of hardened, ground steel. Available in different measuring ranges (from 0÷25 mm to
275÷300 mm); • Micrometer calipers, useful for precise measurements, with interchangeable anvil and locking lever. Instrument is available in
standard measuring range (from 0 to 200 mm) or in large sizes (from 200 to 1000 mm).
Code: AC11UN/U59/050 SERIES - AC11UN/U59/001 SERIES
Rules
Folding Rules
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
RULER
RULER
General purpose rules.
Options available: • Flexible rules, available in different lengths (up to 1000 mm) and width; • Flexible rules (two faces graduation); • Semi-flexible
rules (length up to 3000 mm); • Non-flexible rules
FOLDING RULER
Folding rules available in different materials (wood, fiberglass and aluminium) and lengths (up to 2m).
TAPE RULER
General purpose tape rules in different sizes and widths.
Options available: • Flexible tape rule, steel-made with ABS case.
Available in various tape length (up to 5m) and width (small, medium and large).
- Tape rule with lock, with automatic blade return.
- Tape rule high resistance available in different length (up to 10mt). Tape with reinforced blade tip and shock absorber.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Accessories and Complements
Combination Wrenches
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
WRENCHES
COMBINATION WRENCHES
Combination wrenches with bihexagon head bent at 15° and open end angled at 15°. Made of chrome vanadium steel, chrome-plated finish
and polished heads. Available versions in different lengths (from 5.5 mm to 41 mm); inch sizes also available. Options available: • Set of
combination open ends-ring wrenches (inches or metric size), supplied with plastic support
ADJUSTABLE WRENCHES
Adjustable wrenches bent head (15° approx), made of chrome vanadium steel. Chrome-plated finish and polished head. Available versions
cover a wide range of different sizes (from 13 mm up to 80 mm). Option available: • Adjustable wrenches made of forged steel.
HOOK WRENCHES
Hook wrenches, suitable for working with one wrench only on different sizes nuts, thanks to the hook. Made of chrome-vanadium steel body
and chrome-plated finish. Versions available cover a wide range of different openings (from 15 to 180 mm). Options available: • Adjustable hook
wrenches with square pin; • Fixed hook wrenches with square pin; • Adjustable hook wrenches with round pin
PIPE WRENCHES
Pipe wrenches made of chrome vanadium steel. Enamelled finish and polished head, with straight or bent jaws.
Available in different max jaw openings from 60 mm up to 105 mm.
SF15380309/E
ALLEN KEYS
Angled hexagon (allen) keys for allen screws, suitable to be used for turning female capscrews.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Flat chamfered heads for a perfect fit with the screw, made in chrome vanadium steel.
Accessories and Complements
Options available:
For further information please ask for the relevant Technical Description.
SCISSORS
Universal scissor in steel forged, made in stainless steel with plastic handle cover. Versions are available in various length.
Options available:
For further information please ask for the relevant Technical Description.
▸
SF15380309/E
pag.
94
Combination Pliers
Pliers
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
COMBINATION PLIERS
Modern designed combination pliers made for easy handing and long service life, complete with side cutter.
Chrome-vanadium steel body, knurled gripping surface and sheated handle.
Options available:
- Combination pliers standard type with different lengths (up to 200 mm) and cutting capacities.
- Combination pliers - ergonomic handle with different lengths (up to 200 mm) and cutting capacities.
- Insulated version for electricians.
PLIERS
Complete range of pliers made in chrome vanadium steel with sheated handle.
Versions available include normal pliers, long nose pliers, flat long nose pliers, half round and round long nose pliers and
pliers with jaws bent.
Long nose insulated pliers for electricians are also available.
NIPPERS
General purpose nippers.
Options available:
- A variety of nippers with side cut, diagonal cut, or end (front) cut.
- Series with insulated handles for electronics.
- High leverage cutter for heavy cutting jobs.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Hammers
Accessories and Complements
Hand Brushes
MECHANICAL TOOLS
HACK SAWS
Complete range of hacksaw frame with blade. Frames are made in sturdy steel with device for blade tension regulation. Blades are available
in different sizes.
Options available:
- Tubular hacksaw frame with aluminium handle
- Small hacksaw frame with handgrip in synthetic resin
- Fully adjustable hacksaw frame, equipped with ring nuts for blade clamping and opening adjustment.
SCREWDRIVER SET
Large variety of screwdrivers including:
- Drivers for Flat, Phillips, Pozidriv, Torx screws
- Shank round, hexagonal insulated and offset type
- Length can be long, standard, short or chubby
- Handle can be in hard resin, wood or plastic
- Shank can be equipped with spring loaded device to grip screw while tips can be magnetic
- Precision drivers for fine jobs and for electronics
- Hexagonal socket screw drivers
HAMMERS
A wide range of hammers of different shape and weight according to the typical use: •Ball pen hammers;
•Engineer’s hammer; •Carpenters hammers; •Mechanics hammer french style; •German shape hammers; •Sledge hammers; •Blacksmith
hammers; •
Mining hammers Soft face hammers with: •Plastic tips; •Bronze tips; •Interchangeable soft tips
HAND BRUSHES
Brushes, metallic and softhair type, suitable to remove paint, rust and to clean metals.
Supplied complete with handle according to the model chosen.
Options available:
- Hand brush with ondulated stainless steel wires
- Hand brush bent type with steel wires
- Hand brush for spark plug cleaning (steel or brass wires type)
- Acid scrub brush
- Fiberglass brush
▸
SF15380309/E
Wide range of pullers covering in the standard range, up to 12-15 Tap and dies set for workshops and industries including the following
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
tons capacity. Suitable for working on pinions, bearings, pulleys, threadings: Metric fine and coarse ISO, BSW-BSF Whitworth, BSP
flywheel and generally for external pulling of parts difficult to be UNC, UNF, NPT and in addition typical set for garage arranged for
removed. cars or for trucks. The assortment includes: •Threading and
For further information please ask for the relevant Technical For further information please ask for the relevant Technical
Description. Description.
Tool kits consisting of a complete range of tools for versatile servicing and maintenance. Kits contain the most common basic tools for
mechanical engineer.
Available versions are composed by different numbers of tools from basic set to wider assortments.
For further information please ask for the relevant Technical Description.
◂
pag.
97
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Complete with the most common and useful electrician tools like pliers, wrenches, screwdrivers, hammers, taper rules, etc. in various sizes and
dimensions.
Accessories and Complements
Available options:
- Tool bag for electricians in leather case, with fold-down front panel fitted with storage compartments.
- Roll-up plastic bag for electricians.
For further information please ask for the relevant Technical Description.
Available in different assortments complete with cable terminals and Grinding wheel dressers, suitable to dress grinding wheels with high
crimping pliers for cable links. thickness.
▸
SF15380309/E
pag.
98
Options available:
PUMP OILER
Options available:
- Enamelled sheet steel body, brass pump with flexible or rigid metal spout.
- Plastic body with pump and flexible or rigid metal spout.
- Small type plastic body with retractable rigid metal spout and screw-type valve in the cap.
For further information please ask for the relevant Technical Description.
◂
pag.
99
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
MAGNIFYING LENSES
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Options available:
Accessories and Complements
For further information please ask for the relevant Technical Description.
PROFESSIONAL LEVELS
Highly professional levels with double bead on each side to increase stiffness. A further bar inside the level body through all its length improve,
the stiffness of the structure. Vials are made of high resistance plastic materials, while the central one is rounded for high visibility under any
angle of view.
Available models:
• Flat base levels with 3 vials
Length ranging from 300 to 1200 mm
• V-groove level with 2 vials
Length 1000 mm
▸
SF15380309/E
pag.
100
LADDERS
Options available:
For further information please ask for the relevant Technical Description.
SAFETY EQUIPMENT
Wide range of safety equipment including: protective gloves, disposable gloves, protective masks for work industry area, respirator masks,
goggles, first aid boxes, eyes wash fountains, protective shields, fire extinguishers, protective suites, ear set for noise protection and safety
helmets.
For further information please ask for the relevant Technical Description.
◂
pag.
101
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
05
AR0505
LABORATORY AND
WORKSHOP FURNITURE
FOR FLUID MACHINES
THERMODYNAMICS
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Laboratory and Workshop Furniture
Laboratories and workshops need not only equipment but also furniture such as workbenches or
specialized storage outfit and furniture to store instruments, equipment and ancillaries.
These furniture have to satisfy three main parameters sturdiness, practicalness and durableness.
Moreover ergonomy is a specific factor that must be taken into consideration when designing
furniture for their impact in the users health.
The furniture proposed by Prodit satisfy all the above parameters and the schools can choose among
a wide selection of articles all of them designed and manufactured with high quality standard.
There are also available special seats for computer and electronics labs in which a great care has to
be put in avoiding electrostatic charges.
Wherever possible, without compromise the sturdiness, the furniture are supplied fully knocked down
to be assembled on site to reduce the storage and handling problems.
▸
SF15380309/E
pag.
104
Options available:
For further information please ask for the relevant Technical Description.
WORKBENCHES
This workbench satisfies the needs of the workshop offering: great strength, modular drawer system and a variety of sizes and work surfaces
in different materials (sheetsteel, wood and steel covered wood). The various modules of drawer are interchangeable and allow numerous
combination to be realized. The drawers slide on bearings and can be fitted with lock. Work benches can be supplied in different sizes and with
the most suitable equipment assembled on them.
Optional accessories:
• single drawer unit
• drawer unit with one drawer
• drawer unit with three drawers
• rubber mat for top protection
• bench vices with jaws. Available width from 50 mm to 150 mm
• rotating base for bench vice
For further information please ask for the relevant Technical Description.
SF15380309/E
WORKSHOP STEEL TABLES WITH CABINET AND DRAWERS BASE UNITS FOR LARGE
STORAGE CAPACITY
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Laboratory and Workshop Furniture
Modular workshop table, is composed by 2 drawers sliding on roll bearings, one side cabinet with door, and one large bottom cabinet with two
doors, all equipped with cylinder locks.
The work table top surface is available in 3 different versions: •Sheet steel top; •Wood top; •Steel covered wooden top
There are various versions Workshop Bench providing the utmost in versatility, appearance and durability. These Benches may be used for
custom bench assemblies in Electronic, Electricity, Board Wiring, Motor Windings, Automation, Mechanical and everywhere high quality
workbench for Laboratories and Workshops are required.
The versions available are different in dimensions, Top material, and Console configuration.
All Benches consist of two sturdy metallic legs, a bench top, a Base Cabinet, and a Console with Power supply which configuration is the
most suitable for the specific Laboratory or Workshop.
For further information please ask for the relevant Technical Description.
▸
SF15380309/E
pag.
106
Metal cabinet suitable for use in school classrooms and different Supplied with mobile shelves.
kinds of laboratories.
Available in different sizes.
For further information please ask for the relevant Technical For further information please ask for the relevant Technical
Description. Description.
◂
pag.
107
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Sturdy two seats classroom bench, with painted metallic structure, with bilaminated MDF wooden plane for the top.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Laboratory and Workshop Furniture
The great quality of this bench is its ergonomic design and the easy access to the seats, free from any structure element.
Safety is ensured by the wide ABS rounded corners of all the wooden planes.
Particularly suitable for the school classroom use, due to the very useful individual book holding shelves, placed under the top.
The cross footrest, beside the anatomic function, also allows for the high stability of the whole bench module structure.
The bench structure is also foreseen for the consecutive fixing of more bench modules in rows, conditions that further helps to increase the
stability of the whole structure.
For further information please ask for the relevant Technical Description.
TEACHER DESK
For further information please ask for the relevant Technical Description.
▸
SF15380309/E
pag.
108
Includes full shelf for hats and half width garment rod and three Desk with PC support (PC MIDI size); easy system to run cables
storage shelves at right. embedded in the frame of the same desk.
◂
pag.
109
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
The sturdy modular shelving, suitable for heavy loads, is composed Easy to assemble, this type of shelf is fastened by means of a eight-
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Laboratory and Workshop Furniture
by a series of components including: side support shelves section point clip attachment to the uprights.
bar, zinc plated shelves, support pallets crosspieces, support cross- Sturdy modular shelves supplied knocked-down, made of galvanized
bar, spacer for side support, union joint and hooks for crosspieces. metal sheet suitable for medium loads.
The shelves are available in different dimensions. They include a wide range of components allowing the best possible
use of space according to the product and loading storage.
These shelves can be supplied in many different compositions
according to the client needs. Available in different dimensions and compositions.
Available in different versions. For further information please ask for the relevant Technical
Description.
Suitable to store bolt, screw or other bits and pieces. Drilled-sheet tool panels (dia. 4 mm holes) suitable to be used in
workshops.
Available in different sizes.
Available options:
• Wall type tool holder
Code: AR05UN/A01/001 SERIES Equipped with removable shelf
• Floor type tool holder
Equipped with removable shelf
▸
SF15380309/E
pag.
110
SERVICE TROLLEYS
Flat bed material trolley with four wheels: two fixed and two swivelling.
Sturdy construction with reinforced platform, it has a tubular shaped handle for movement.
◂
pag.
111
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Laboratory and Workshop Furniture
waste or workpiece. Steel cabinets with lockable doors for storage at plastic bins. They
are very useful to leave in order laboratories and workshops.
Stackable type. Doors and cabinet body are reinforced with box-type structure. The
Various dimensions available. cabinets are supplied with 2 standard keys.
Code: AR05UN/A01/010
▸
SF15380309/E
pag.
112
Monocoque in black polypropylene, armrests in nylon (if present), Sturdy construction with heavy gauge all welded tubular steel frame
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
◂
pag.
113
PRODIT ENGINEERING SpA
Italian Leading Technology in Education
FLUID MACHINES THERMODYNAMICS
BLACKBOARDS
Blackboards with sturdy aluminium frame suitable for writing with chalks or marking pens.
Photos and texts in this catalogue may not be reproduced without express and written authorization from PRODIT ENGINEERING S.p.A.
Laboratory and Workshop Furniture
For further information please ask for the relevant Technical Description.
Code: AR05UN/A13/009
Code: AR05UN/A13/003
▸
SF15380309/E
pag.
114
JORDAN REGIONAL OFFICE: 10, Abdul Hamid Shuman Street - Matalka Center -
3rd Floor - P.O. Box 942130
Shmeisani Amman 11194 The Hashemite Kingdom of Jordan
Tel.: +962 6 5667916/5676257 - Fax: +962 6 5676192 -
middleeastoffice@prodit.com
ALGÉRIE:
Mobile: +213 551 598254 / +39 329 0975053