Professional Documents
Culture Documents
Brochure Extruder C2TX
Brochure Extruder C2TX
C TX
EXTRUDER
simplicity
Ultimate
MINIMUM
ONE SCREW AND BARREL CONFIGURATION EXPANSION/
FOR ALL YOUR PRODUCTS. HIGH DENSITY
Pressure Curve with Valve Open
EXTRUDATE
The short extruder shafts and screws are more rigid in
Product density can be controlled from 32 to 500 g/l
the extruder barrel resulting in easier alignment of the
at moisture levels from 10 to 40%.
screws and a reduction in metal to metal contact and
wear on the screws and the barrel wall, extending the
life of the rotating parts in the extruder.
Compared to the cost of wear-parts in a conventional
twin screw extruder, the cost of these parts in the C2TX
is dramatically reduced.
WENGER PLUMBING/WIRING MODULE
SPEEDS INSTALLATION
A prepackaged plumbing module is provided with every new
Wenger extruder. These pre-engineered, packaged modules
come skidded and ready to connect to your steam and
water service. Furthermore, each major equipment
component includes an electrical junction box with
control devices pre-wired to terminals. These standard
features save installation expense, time, effort and the
typical system start-up delays that can plague the
commissioning of new equipment installations.
CERTIFIED
WWW.WENGER.COM BULLETIN C2TX-0507 © 2007 WENGER MANUFACTURING,
ISO 9001:2000INC.