Professional Documents
Culture Documents
Criterio de Falla e Introducción A Compuestos
Criterio de Falla e Introducción A Compuestos
ENGINEERING FACULTY
STRUCTURAL ANALYSIS
Class work
FAILURE CRITERION
General description:
The following class work has to be made on class time and in a group of no more than 3
persons, you have to upload the work in the virtual course (web page).
The dead line is October 9 at 23:55 p.m. and it must be done on pc.
The work must be according to INCONTEC rules.
11- The thin-walled pressure vessel with open ends as shown bellow is acted on by an internal
pressure of 100_psi.
If the radius is 10_in and the thickness is of 0.1_in and the yield stress is 20_Kpsi,
determine the torque Mx that will cause yield using both Tresca´s and Von Mises´ yield
criteria. Give a difference between both yield criteria.
12- For both, point 10 and 11 give an engineering conclusion about the behavior of Tresca and
Von Mises´ yield criteria, what may you note about those yields criteria?.