Professional Documents
Culture Documents
Autoclaves For Sterilisation "Presoclave II" - Manual
Autoclaves For Sterilisation "Presoclave II" - Manual
“The process of scientific discovery is, in effect, a continual flight from wonder.”
Albert Einstein
Electric Autoclave for sterilisation
MICROPROCESSOR CONTROL OF
TEMPERATURE AND STERILISATION CYCLE,
ATMOSPHERIC AIR PURGE:
PRESOCLAVE II 30 (mod. vertical)
PRESOCLAVE II 50 (mod. vertical)
PRESOCLAVE II 75 (mod. vertical)
MICROPROCESSOR CONTROL OF TEMPERATURE AND STERILISATION CYCLE,
PULSED VACUUM AIR PURGE:
AUTESTER ST DRY PV-B 12 (mod. horizontal) AUTESTER ST DRY PV-II 30 (mod. vertical)
AUTESTER ST DRY PV-B 18 (mod. horizontal) AUTESTER ST DRY PV-II 50 (mod. vertical)
AUTESTER ST DRY PV-B 25 (mod. horizontal) AUTESTER ST DRY PV-II 75 (mod. vertical)
AUTESTER ST DRY PV-II 140 (mod. vertical)
MICROCLAVE 2 4001404 NO 7 121 and 127 1 and 1.5 1000 Pressure thermostat Atmospheric Vertical bench top
MEDICLAVE 12 4047725 NO 12 121 and 134 1 and 2 1800 Pressure thermostat Atmospheric Vertical bench top
PRESOCLAVE II 30 4002135 NO 30 115 to 134 0.62 to 2 2800 Electronic controller Atmospheric Vertical
PRESOCLAVE II 50 4001725 NO 50 115 to 134 0.62 to 2 3600 Electronic controller Atmospheric Vertical
PRESOCLAVE II 75 4002136 NO 75 115 to 134 0.62 to 2 3600 Electronic controller Atmospheric Vertical
AUTESTER ST DRY PV-B 12 4001727 YES 12 121 and 134 1 and 2 1800 Microprocesador Purged vacuum Horizontal bench top
AUTESTER ST DRY PV-B 18 4001728 YES 18 121 and 134 1 and 2 1800 Microprocesador Purged vacuum Horizontal bench top
AUTESTER ST DRY PV-B 25 4002414 YES 25 105-121 and 134 0.21-1 and 2 2510 Microprocesador Purged vacuum Horizontal bench top
AUTESTER ST DRY PV-II 30 4002514 YES 30 105 to 134 0.21 to 2 2800 Microprocesador Purged vacuum Vertical
AUTESTER ST DRY PV-II 50 4002515 YES 50 105 to 134 0.21 to 2 3600 Microprocesador Purged vacuum Vertical
AUTESTER ST DRY PV-II 75 4002425 YES 75 105 to 134 0.21 to 2 3600 Microprocesador Purged vacuum Vertical
AUTESTER ST DRY PV-II 140 4002426 YES 140 105 to 134 0.21 to 2 7500 Microprocesador Purged vacuum Vertical
48 Autoclaves
Electric Autoclave for sterilisation “Microclave 2”
PRESSURE REGULATOR THERMOSTAT OF 1 AND 1.5 bar. TEMPERATURES 121 °C AND 127 °C.
VERTICAL TABLE TOP. CAPACITY: 7 LITRES.
SAFETY:
OVER PRESSURE VALVE, PREVENTS THE PRESSURE PASSING THE SET
MAXIMUM LIMIT. THERMALLY PROTECTED INSULATED LID.
FEATURES
Stainless steel AISI 304 exterior and top.
INCOLOY heater element. provides long life, resistant to corrosion and high tempe-
ratures.
The chamber and lid are made of aluminium alloy with P.T.F.E. coating.
Manual air purge and bleed valve.
Simple secure bayonet type lid.
CONTROL PANEL
Illumninated mains switch indicator.
Pressure selection.
Timer 0 to 120 minutes.
Pressure gauge.
Indicator lamps showing when the heater is on.
Indicator lamps showing when the heater is on at 121 °C.
Indicator lamps showing when the heater is on at 127 °C.
MODEL Part No. Capacity Ø Height Height Width Depth Power Weight
litres (usable) cm (exterior) cm W Kg
Semi-automatic
FEATURES
Stainless steel AISI 304 exterior and top.
INCOLOY heater element. Provides long life, resistant to corrosion and high tempe-
ratures.
The chamber and lid are made of AISI 316 stainless steel.
Automatic pulsed air inlet.
CONTROL PANEL
Illuminated mains switch.
Pressure selection.
Timer 0 to 60 minutes.
Pressure gauge.
Indicator lamp showing when the heater is on.
Indicator lamp showing that the safety thermostat is in operation.
Indicator lamp showing when the heater is at 121 °C.
Indicator lamp showing when the heater is at 134 °C.
Indicator lamp showing end of cycle.
MODEL Part No. Capacity Ø Height Height Width Depth Power Weight
litres (usable) cm (exterior) cm W Kg
Autoclaves 49
Autoclaves for sterilisation “Presoclave II” 30, 50 and 75
MICROPROCESSOR CONTROL OF TEMPERATURE CYCLE AND PURGE TO ATMOSPHERE.
ELECTRONIC CONTROL OF TIME AND TEMPERATURE WITH DIGITAL DISPLAY TEMPERATURE RANGE FROM 115 °C TO 134 °C
(0.62 TO 2 bar).
CONFORMS TO APPARATUS PRESSURE REGULATION NORMATIVES.
VERTICAL MODEL: 30, 50 AND 75 LITRES.
SAFETY:
SAFETY OVER PRESSURE VALVE: PREVENTS OVER PRESSURE ABOVE THE MAXIMUM SET LIMIT.
SAFETY PRESSURE SWITCH: DISCONNECTS POWER TO THE HEATER IF THE UNIT EXCEED THE MAXIMUM PRESSURE LIMIT.
SAFETY THERMOSTAT AND WATER LEVEL: DISCONNECT POWER TO THE HEATER IF INSUFFICIENT WATER OR OVER TEMPERATURE.
SAFETY LID: PREVENTS THE LID BEING OPENED IF THE CHAMBER IS UNDER PRESSURE.
SAFETY INSULATION: THERMALLY INSULATED LID .
CONTROL PANEL
1
2
3
4 13
5
6
7
8
9
10
11
12
1. Pressure gauge.
2. Illuminated alarm indicator.
3. Illuminated indicator end of cycle.
4. Illuminated indicator door open
5. Temperature display.
6. Time display
7. Temperature set pushbutton (range from 115 °C to 134 °C).
8. Pushbutton increase value.
9. Push button START
10. Push Button STOP
11. Push button Reduce value. BACK VIEW:
12. Push button select time, (range from 3’ to 59’).
13. Push button open lid. 1
1. Mains power.
MODELS Part No. Capacity Ø Height Height / Width / Depth Power Weight
2 2. Safety valve.
litres (usables cm) (exterior cm) W Kg
3 3. Steam empty valve.
4. Safety thermostat
PRESOCLAVE II 30 4002135 30 30 40 97 48 62 2800 62 4 5. Drain selector valve.
PRESOCLAVE II 50 4001725 50 30 70 117 48 62 3000 75
5
PRESOCLAVE II 75 4002136 75 40 60 107 58 72 3600 100
Does not include baskets, order separately.
ACCESSORIES: AISI 316 Stainless steel baskets. Sterilisation drum made from
AISI 304 stainless steel. Detergent Bio-Sel. Water distillation unit especially OPTIONS: That need to be factory installed:
for autoclaves (see page 53). Pt100 second sensor only temperature reader (see page 53).
50 Autoclaves
Autoclaves for sterilisation “Autester ST DRY PV II”
MICROPROCESSOR TEMPERATURE AND CYCLE CONTROL AND PULSED VACUUM PURGE SYSTEM.
AUTOMATIC VACUUM DRY AND PURGE “PREVACUUM”
PROGRAMMABLE TEMPERATURE FROM 105 °C TO 134 °C (0.21 TO 2 bar).
CONFORMS WITH THE CURRENT REGULATIONS FOR PRESSURE VESSELS.
VERTICAL FLOOR STANDING MODEL: 30, 50, 75 AND 140 LITRES.
CONFORMITY
EN 61010-1 SAFETY FOR EQUIPMENT FOR LABORATORY USE
EN 61010-2-041 SAFETY FOR STERILISER EQUIPMENT FOR LABORATORY USE
EN 61326 ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT FOR LABORATORY USE.
FEATURES
AISI 304 stainless steel exterior and top.
AISI 316 stainless steel lid
Lid, six closure point system.
Pulsed vacuum system and atmosphere purge. NEW
Incorporated steam generator, connected to the main chamber.
Water reservoir for clean water for the steam generator boiler.
External water connection if required.
6 function modes.
Printer output. RS232 connection for download or to a printer.
Connection for a second temperature sensor
Memory for 9 customer set programs.
SAFETY
Safety: The lid cannot be opened if the chamber is under pressure.
Safety valve: Prevents over pressure over the maximum limit.
Safety pressure switch: switches power off to the heater if over pressure.
Safety Lid: insulated lid protection.
CONTROL PANEL
5 10 11 BACK VIEW
6
1 1. Mains input.
1 2. External water supply.
2 2 3. Safety valve.
4. Vacuum vapour valve.
3 5. Air in filter valve.
4 6. Safety thermostat.
3 7. Safety thermostat.
4 5
8. Empty tank valve.
6 9. Drain tank valve.
1. LCD parameter indicator. 4. Push button Start / Stop. 7 10. RS232 Printer connection.
2. MONO single button control multi- 5. Printer (optional). 11. 2nd Temperature sensor con
8 nection.
function processor. 6. Open Lid.
3. LED in operation. 9
Autoclaves 51
CONFORMITY
The microprocessor controls the air extraction, sterilisation and dry process from preset values set by the
operator. Controlled parameters are:
• Sterilisation temperature from 105 °C • Configuration
to 134 °C - Units
• Sterilisation time from 3’ to 60’. - Languages ( Spanish, English, and
• Drying time from 20’ to 60’ French).
• Programs-0 to 9 user configurable - Printer
• Six pre-set functions: - Timer: date/hour
- Solids 1 fraction - Water connection external: on/off.
- Solids 2 fractions • Password
- Solids 3 fractions • Calibration
- Dry - Temperature probe 1
- Liquids - Temperature probe 2
- Liquids 2 temperature probes - Water fill
• Verification tests
- Vacuum
- Bowie Dick
Error messages of functions or execution of a program are displayed and an acoustic alarm sounds.
The vapour generator automatically cuts out.
MESSAGES:
1. E 2PROM 10. TEMPERATURE LOW FAULT
2. RTC FAULT 11. INPUT ERROR
3. SENSOR PRECISION 12. STERILISATION
4. HEATER PROBE 13. LEVEL 1
5. CHAMBER PROBE 14. LEVEL 2
6. OVER PRESSURE 15. DOOR
7. VACUUM 16. PRINTER, NO PAPER
8. PRESSURE 17. PAPER JAM
9. BOILER TEMPERATURE 18. ELECTRICAL FAULT
MODELS Part No. Dry Capacity Ø / Height Height / Width / Depth Temp. Water Basket Power Weight
litres (usables) cm (exterior) cm °C Reservoir size W Kg
H2O capacity.
OPTIONS: Factory fitted options PARAMETERS AND PROGRAMS PRE INSTALLED IN THE AUTOCLAVE MICROPROCESSOR
(Note: All these parameters are adjustable by the user)
Thermal printer continuous paper roll with Nº Description Temperature Time Time Purge
Programme Sterilisation Sterilisation Dry
print out of temperature, pressure, time and
mode. 0 Free - - - -
Part No. 4002417 1 Unwrapped instruments 134 °C 4 min 15 min 2 (1)
2 Wrapped instruments 134 °C 12 min 30 min 3 (2)
3 CJD 134 °C 20 min 20 min 3 (2)
4 Delicate unwrapped 121 °C 15 min 15 min 2 (1)
Pt100 Sensor 5 Delicate wrapped 121 °C 30 min 30 min 3 (2)
(See page 53). 6 Disinfecting 105 °C 25 min 15 min 1 (3)
7 Liquids 121 °C 30 min - 1 (3)
ACCESSORIES 8 Solids 121 °C 15 min 30 min 1 (3)
AISI 316 Stainless steel baskets. 9 Solids 134 °C 4 min 30 min 1 (3)
Sterilisation drum made from AISI 304 stainless steel.
Detergent Bio-Sel. (1) Double Vacuum purge.
Water distillation unit especially for autoclaves (2) Triple Vacuum purge.
(see page 53). (3) Atmospheric purge (No vacuum).
52 Autoclaves
OPTIONS: for vertical autoclaves, need to be factory fitted.
Sterilisation Drums.
Part No. Ø Height Suitable for autoclaves Capacity
cm Part No. Drums
Autoclaves 53
Sterilisation autoclave “Autester ST DRY PV” Class B
AUTOMATIC VACUUM DRY AND PURGE.
PROGRAMS TO 105 °C, 121 °C AND 134 °C (0.21 – 1 AND 2 bar).
MODEL HORIZONTAL. CAPACITY: 12, 18 AND 25 LITRES.
APPLICATIONS
"Class B" autoclaves are used within the field of general medicine, dentistry, veteri- To guarantee sterilisation of these materials the “AUTESTER ST DRY PV” Class B, au-
nary, tattoo parlours and sterilisation applications in general, to sterilise any material toclaves, have an efficient staged vacuum, that performs a complete extraction of air
that could have been in contact with body fluids including blood. that allows penetration of the steam vapour.
The general capabilities of the instrument are regulated by EN 13060 that guarante- The same vacuum system is used to obtain the dry phase, which is required for per-
es the differing sterilisation applications. fect storage of sterilised materials.
The normal processes include: Solids with and without wrapping, porous material The “AUTOCLAVES ST DRY PV” Class B includes verification and validation pro-
with and without wrapping and utensils that have cavities and holes (e.g. dentistry grams.
materials.)
CONFORMITY:
EN 13060-1 SMALL GENERAL PURPOSE STEAM STERILISERS.
EN 13060-2 SMALL STEAM STERILISER: SPECIFIC TO "CLASS B"
EN 61010-1 EQUIPMENT SAFE FOR LABORATORY USE.
EN 61010-2-041 SAFETY FOR STERILISER EQUIPMENT FOR LABORATORY USE
EN 61326 ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT USED IN THE LABORATORY.
SAFETY:
SAFETY VALVE: PREVENTS THE PRESSURE EXCEEDING THE MAXIMUM SET LIMIT.
SAFETY THERMOSTAT: DISCONNECTS THE HEATER AGAINST OVER TEMPERATURE OR LOW WATER IN THE RESERVOIR.
THERMALLY INSULATED LID.
NEW
25 litres
12 litres
18 litres
54 Autoclaves
Sterilisation Autoclaves “Autester ST DRY PV” 12 Class B
CAPACITY: 12 LITRES.
CONFORMS TO THE FOLLOWING REGULATIONS:
- 97/23/CEE EQUIPMENT UNDER PRESSURE. PART 3.3
- 93/42/CEE SANITARY EQUIPMENT, REGISTERED ORGANISM 0197
FEATURES
Stainless steel internal chamber.
Staged vacuum purge.
Dry by vacuum
Incorporated steam generator.
Water reservoir to supply the chamber
High vapour penetration of porous material
Used in digestive studies, ophthalmology, operating
theatres etc .
Printer interface.
SAFETY
Safety valve. Prevents over pressure over the maxi-
mum working limit.
Safety thermostat. Disconnects power to the heater
if over temperature or low water in the reservoir.
Thermally protected lid. NEW
CONTROL PANEL 9
1 5
1. Textile materials 10. Select wrapped or non wrapped.
2 4 2. 121 °C. 11. Test.
3 10 3. 134 °C. 12. Fast sterilisation.
4. Wrapped solids. 13. "maintain hot" the chamber.
15 11 5. Solids (Not wrapped). 14. Preheat.
16 12 6. Low level water indicator. 15. Pressure indicator (bar).
7. Autoclave ready for operation. 16. Temperature indicator (°C).
17 13
8. Sterilisation cycle in process 17. Time Indicator (min.).
14 9. Program selection.
6
7
8
ACCESSORIES
Comes complete with:
Water in tube, door ad- Ink Printer (no thermal).
justment key, support Paper size 2 1/4’’ (56 mm) wide.
with three trays, extrac- Includes communications and power cable.
tor forceps, empty water Model
filter and waste water Part No. Height/Width/Depth Power Weight
out. cm Kg
4120113 4 16 10 DC 5V 3A 1
Autoclaves 55
Sterilisation Autoclaves “Autester ST DRY PV” 18 Class B
CAPACITY: 18 LITRES.
CONFORMS TO THE FOLLOWING REGULATIONS:
- 97/23/CEE EQUIPMENT UNDER PRESSURE. PART 3.3
- 93/42/CEE SANITARY EQUIPMENT, REGISTERED ORGANISM 0197
FEATURES
Stainless steel internal chamber.
Staged vacuum purge.
Dry by vacuum
Incorporated steam generator.
Water reservoir to supply the chamber
High vapour penetration of porous material
Used in digestive studies, ophthalmology, operating
theatres etc .
Printer interface
SAFETY
Positive door lock, prevents the door being opened
accidentally.
Safety valve. Prevents over pressure over the maxi-
mum working limit.
Safety thermostat. Disconnect power to the heaters if
over temperature or low water in the reservoir.
Thermally insulated lid.
CONTROL PANEL
NEW
2
6
1 1. Start - Stop.
2. LCD screen.
3 3. Cancel - Menu.
4. Validation.
5. Rapid cycle.
4 6. Validation time.
5
ACCESSORIES
Comes complete with:
Water in tube, door ad- Ink Printer (no thermal).
justment key, support Paper size 2 1/4’’ (56 mm) wide.
with three trays, extrac- Includes communications and power cable.
tor forceps, empty water Model
filter and waste water Part No. Height/Width/Depth Power Weight
out. cm Kg
4120113 4 16 10 DC 5V 3A 1
56 Autoclaves
Sterilisation Autoclaves “Autester ST DRY PV” 25 Class B
CAPACITY: 25 LITRES.
CONFORMS TO THE REGULATION - 97/23/CEE EQUIPMENT UNDER PRESSURE.
FEATURES
Sterilisation chamber and lid made from AISI 316 stain-
Complete selection of programs.
less steel. Displays in Spanish - English - French.
External case epoxy coated.
Incorporated steam generator separate from the main Output RS-232.
sterilisation chamber.
Digital control of all autoclave operations.
Large back lit LCD 2 x 24 character display.
Air filter, purifies air before entering the sterilisation
chamber.
Separate clean water reservoir for the steam generator
and waste water.
RS-232 Interface output of parameters to a computer.
RS-232 Printer interface.
SAFETY
Safety valve.
Prevents the door being opened if under pressure or
high temperature.
Pressure safety Presostat.
Temperature safety thermostat.
Door closed correctly detector
Thermally protected lid.
ALARMS
Pressure/Temperature reading out of normal value.
Door Open.
Electrical fault.
Over pressure.
Over temperature. NEW
Program error.
Low water.
Water reservoir level full.
Autoclaves 57
Bag sealer “S-400”
SUITABLE FOR POLYPROPYLENE-POLYESTER STERILISING
BAGS WITH A PAPER BASE.
FEATURES CONTROL PANEL
Metal epoxy covered case. Illuminated mains switch.
Pressure sealer. Manual cut. Lamp on when the thermostat has rea-
Stainless steel AISI 304 reel support at ched the pre-set working temperature.
the back.
MODEL
Part No. Seal Width Maximum seal Height / Width / Depth Power Weight
mm length mm (exterior) cm W Kg
Rolls of paper for sterilisation “Polisteril” Sterile paper “Policort” trimmer Date stamping machine for sterile bags.
Paper base polypropylene and polyester bags showing Completely made of metal with back and reel support,
differing ink prints of sterilised items. for a capacity of 2 x 200mm or 4 x 100 mm wide reels. Part No. 4100046
Part No. Bag width cm Bag length m Circular cutting knife edge. STERILISED
4100075 7,5 100 Measurements: 13 high x 51 wide x 32 cm deep.
30 JULY 2007
4100100 10 100 Weight: 2.8 Kg.
4100200 20 100 Part No. 4100045 VALID FOR 3 MONTHS.
OPTIONS: Ultrasonic cleaning baths for dentistry, “DIGITMED” (see page 82). Dry steriliser “DRYTIME” poupinel oven (see page 123).
888
58 Autoclaves