Foam Oven Cleaner MSDS

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PAGE 1 of 2 VERSION 2 ISSUE DATE 02 Nov.

06

MAGIC FOAMING OVEN


CLEANER (FORCE)
SAFETY DATA SHEET
1. IDENTIFICATION OF PREPARATION AND OF THE COMPANY
Manufacturer: R P ADAM LIMITED
Riverside Road, Selkirk
Scotland TD7 5DU, United Kingdom
TEL: 01750 21586 FAX 01750 21506
E-Mail salesinfo@rpadam.co.uk
Product Name: MAGIC FOAMING OVEN CLEANER (FORCE)
2. COMPOSITION/INFORMATION ON INGREDIENTS*
Contains amongst other ingredients:
Range CAS EINECS Class R-Phrases
Sodium Hydroxide 15 – 30 % 1310-73-2 215-185-5 C 35
Trisodium Nitrilotriacetate 1-5% 5064-31-3 225-768-6 Xn 22 36
Alkylpolyglycoside 1–5% Xi 41
The full text for all R-Phrases are shown in Section 16
3. HAZARD IDENTIFICATION
Corrosive. Causes severe burns. Corrosive to body tissue. If ingested, causes severe internal irritation and damage. Contains an ingredient
(Sodium Hydroxide) with an OES published in EH40 (See section 8)
4. FIRST AID MEASURES
INHALATION: Remove from source of exposure. Obtain immediate medical attention

EYES: Rinse immediately with plenty clean water for at least 10 minutes, holding eyelids open to flush
thoroughly. Obtain immediate medical attention.
SKIN: Wash affected area thoroughly with running water. Remove any contaminated clothing and
launder before re-use. Seek medical attention
SWALLOWING: Wash out mouth with water. DO NOT INDUCE VOMITING. Give water to drink and seek
immediate medical attention.
5. FIRE FIGHTING MEASURES Product is Non-Flammable
EXTINGUISHING MEDIA: Use extinguishers appropriate to surrounding fire
HAZARDOUS COMBUSTION None Known
PRODUCTS:
PROTECTION OF FIREFIGHTERS: Wear self-contained breathing apparatus and protective clothing including gloves and eye/face
protection
6. ACCIDENTAL RELEASE MEASURES:
PERSONAL PRECAUTIONS: Wear Protective Clothing and eye/face protection (See Section 8)
ENVIRONMENTAL PRECAUTIONS: Flush away with large volumes of water diluting to at least 1% (10g/litre). If this is likely to
contaminate a water course or vegetation or for large volumes contain with sand or granules
and dispose of via a registered waste contractor. Treat as sodium hydroxide solution.
7. HANDLING AND STORAGE:
Avoid contact with skin and eyes. Wear protective clothing and eye/face protection if splashing or spillage is likely. Store containers upright
and sealed in the original container. Do not mix with any other chemicals unless advised to do so by a representative of R. P. Adam Ltd.
8. EXPOSURE CONTROLS*:
Ingredient Name CAS No. STD WEL (8 hrs) WEL (15 min)
Sodium Hydroxide 1310-73-2 EH40 2mg/m3
EXPOSURE CONTROLS
RESPIRATORY PROTECTION Not required in normal use. Contact RP Adam Ltd if own risk assessment indicates a
requirement.
HAND PROTECTION Wear gloves made from Butyl rubber, neoprene, nitrile, PVC or material resistant to sodium
hydroxide
EYE/FACE PROTECTION Wear approved visor or safety goggles
SKIN PROTECTION Wear PVC, rubber or alkali resistant protective overalls or apron
ENVIRONMENTAL Do not allow large quantities to enter surface waters.
PAGE 2 of 2 VERSION 2 ISSUE DATE 02 Nov. 06

MAGIC FOAMING OVEN


CLEANER (FORCE)
SAFETY DATA SHEET
9. PHYSICAL AND CHEMICAL PROPERTIES (NOT A SPECIFICATION)
APPEARANCE: Clear Colourless liquid SOLUBILITY: Completely water soluble
ODOUR: Slight Caustic pH (200C): 13-14
BOILING POINT: Above 1000C FLASH PT: None to boiling
10. STABILITY AND REACTIVITY
CHEMICAL STABILITY: Stable Mixture
MATERIALS TO AVOID: Will create exothermic reaction with acids. Reacts with aluminium, Zinc and their alloys giving
off flammable gas.
11. TOXILOGICAL INFORMATION
ACUTE TOXICITY-INGESTION: Corrosive – May cause severe internal injury and burns to mouth, throat and digestive tract

SKIN CONTACT: Corrosive. May cause severe burns.

EYE CONTACT: Extreme irritation to eyes and mucous membranes, including severe burns.

INHALATION: Not volatile, however inhalation of spray would cause severe irritation to mouth and respiratory
system
12. ECOLOGICAL INFORMATION*
Classification of the constituent ingredients and their individual concentrations in this product indicate that it is likely to be biodegradable
and environmental problems under normal use conditions are not expected.

The surfactant(s) contained in this preparation complies (comply) with the biodegradability criteria as laid down in Regulation (EC)
No.648/2004 on detergents. Data to support this assertion are held at the disposal of the competent authorities of the Member States and
will be made available to them, at their direct request or at the request of a detergent manufacturer.
13. DISPOSAL
Product does not contain any prescribed substances under the Environmental Protection Act Regs (1991) but is classified as special waste
under the Control of Substances (Special Waste) Regs 1996. Dispose of in accordance with all local and national regulations. For small
quantities dilute with at least 100 parts of water and pour down waste water drain (foul sewer). Rinse out empty containers thoroughly and
recycle if facilities exist or dispose of as commercial waste. For larger quantities contact a licensed waste contractor.
14. TRANSPORT INFORMATION Classified as Corrosive for Transport
CONVEYANCE LABEL: Corrosive, Sodium Hydroxide Solution
CLASS NO.: 8
PACKING GROUP: II
U.N. NO. – 1824
15. REGULATORY INFORMATION: Classified as Corrosive
Hazard Symbol:

C Corrosive. Contains Sodium Hydroxide

Risk Phrases: R35 Causes severe burns


Safety Phrases: S1/2 Keep locked up and out of reach of children
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection,
S-45 In case of accident or if you feel unwell, seek medical advice immediately
(show label where possible)
16. OTHER INFORMATION
* Signifies that a significant alteration has been made in this section compared with the previous issue
Text of Risk Phrases associated with ingredients listed in Section 2
R35 – Causes severe burns
R36 – Irritating to eyes and skin
R22 – Harmful if swallowed
R41 – Risk of serious damage to eyes
Refer to Technical Information Sheet for product use and applications. The contents of this MSDS apply to the normal use of our product
and the recipient must take individual responsibility for observing existing laws and regulations eg COSHH and Risk Assessments.

You might also like