Professional Documents
Culture Documents
Coating Thickness Gauge: Tips
Coating Thickness Gauge: Tips
5
3. Specifications
Probe Probe F Probe N
This compact gauge can be used for non-destructive coating thickness Resol ution 0um~99.9um(0.1um) 0um~99.9um(0.1um)
100um~999um(1um) 100um~999um(1um)
measurement of non-magnetic coatings, e.g. paint, enamel, chrome on >1000um(0.01mm) >1000um(0.01mm)
steel, and insulating coatings, e.g. paint and anodizing coatings on non- Calibration zero point calibration
ferrous metals. Statistics No. of rea din gs, mean, minimu m, maximum
Units um , mm, mils
Minimum curvature radi us convex 5mm
8
1 Minimum curvature radius co ncave 25mm
1. Probe mode: AUTO, F, N Minimum measuri ng area Diameter 20mm
AUT O
7 3. Statistics display Maximum measuri ng rate Two readings per sec ond
2 Power suppl y Two 1.5V AAA battery
um 4. Auto-power off indication Operation environment Temperature: 0 to 50℃(32 to 122℉); humidity : 20% to 90%rh
6
3 5. Low battery indication Storage environment Te mp erat ure: -10 to 60℃(14 to 140℉)
Fe
MEA N
6. Substrate(Fe: ferrous; N: non-ferrous) Standar d Compliance CE ROHS FCC
Size 110 mm×5 3 mm×2 4 mm(4. 33"×2. 09"×0.9 4")
4 um
5 7. Unit(um、mm、mils) Case Material ABS; 92g(3. 2 4 oz)
8. No USB
9. UP key(unit switch)
9 10. RIGHT key(zero calibration, MEAN
4. Basic Measurement Step
13 MIN/MAX/NO) Step 1. Prepare the sample to be measured.
12 10
11. DOWN key(backlight on/off, auto- Step 2. Press POWER key to power on.
11 power off enable/disable) Step 3. Reference to the chapter 5 if need to calibrate the gauge.
12. LEFT key(probe mode switch, delete Step 4. Start measuring. Place the probe on the sample vertically and
readings) rapidly, and after one beep, raise the probe rapidly. Readings will be
13. POWER on/off key display on LCD, meanwhile statistics value are upgraded and displayed.
14. Probe Step 5. Do next measurement according to step 4.
14 15. V groove Step 6. Press POWER key to power off. If not any operations within 3
15
16. Standard foil min., the gauge will power off automatically.
16 17. Substrate Note: 1. If displayed, the battery is OK. Or if displayed, the battery
17 capacity is low, and measurement will be not reliable, and you need to replace
the battery.
1 2