Professional Documents
Culture Documents
Synthalat A 065: Charakteristics: Supplied As
Synthalat A 065: Charakteristics: Supplied As
Use: In combination with aliphatic polyisocyanates air- and stove-drying two-component coatings for
industrial coatings with high flexibility, adhesion and weathering resistance.
Properties: A B C
hydroxyl value 60-70 60-70 60-70
(in-house method AV-F-H003)
flash point in °C 24 25 48
(as supplied)
(in-house method AV-F-F006)
Film properties: In combination with aliphatic polyisocyanates like „Desmodur N“, non-yellowing films are
obtained that have exellent weatering resistance. These types of coatings are characterized by
a very rapid physical drying an they produce harder films than those on the basis of A 045 and
A 085. However, the abrasion resistance of the more densely linked A 150 is not quite attained.
They are also distinguiahed by good water resistance and good resistance to corrosive
chemicals.
Pigmentation: All neutral pigments and fillers are suitable for pigmentation. Basic pigments and pigments
containing soluble metallic compounds may exert a catalytic effect on curing and shorten the
pot life of finished mixed batches.
Alter Postweg 35 Tel.: +49 (0) 41 61 / 70 71-0 Persönlich haftende Gesellschafterin Geschäftsführer
D-21614 Buxtehude Fax: +49 (0) 41 61 / 80 130 Synthopol Chemie Dr. Koch Verwaltungs GmbH Dr. Henning Ziemer
www.synthopol.com info@synthopol.com Registergericht Buxtehude B 2576
All data is given to the best of our knowledge, for the purpose of information and advice. No claims of any kind - including in respect of patent rights - can be inferred herefrom.
SYNTHALAT A 065
Best results are obtained with a mixing ratio of 100 parts by weight of SYNTHALAT-A 065 (form
in which supplied) with 15 parts by weight of „Desmodur N 75%“. An undercuring or overcuring
has only little influence on the film properties.
Solubility/
Dilutability: Ethyl acetate + MEK +
Butyl acetate + MIBK +
MPA + Toluene +
EGA + Xylene +
Butoxyl + Solvesso 100 und 150 +
White spirit -
+ = dilutable
- = not dilutable
It is important to make sure that only anhydrous solvents and solvents containing no OH groups
are used.
Synthalat A 045 + + + + +
A 055 + + + + +
A 075 - - - - -
A 085 + + + + +
A 090 + - - - -
A 135 + + + + +
A 141 HS + + + + +
A 150 - - - - -
A 151 - - - - -
A 190 - - - - -
A 1613 + + + + +
A 1633 + + + + +
Synthoester HD 165 + - - - -
HD 170 HS + + + + +
NC-Chips E 510 + + + + +
Vinylite VAGH + + + + +
Vinylite VROH - - - + +
CAB 551-001 + - - - -
+ = compatible
- = incompatible
Alter Postweg 35 Tel.: +49 (0) 41 61 / 70 71-0 Persönlich haftende Gesellschafterin Geschäftsführer
D-21614 Buxtehude Fax: +49 (0) 41 61 / 80 130 Synthopol Chemie Dr. Koch Verwaltungs GmbH Dr. Henning Ziemer
www.synthopol.com info@synthopol.com Registergericht Buxtehude B 2576
All data is given to the best of our knowledge, for the purpose of information and advice. No claims of any kind - including in respect of patent rights - can be inferred herefrom.