Professional Documents
Culture Documents
Datasheet LM337 X
Datasheet LM337 X
Datasheet LM337 X
1 2
1.5 AMP
1 2
NEGATIVE ADJUSTABLE
3
3
VOLTAGE REGULATOR
Pin 1 – ADJ. Pin 1 – ADJ.
Pin 2 – VOUT Pin 2 – VOUT
Case – VIN Case – VIN FEATURES
K Package – TO–3 R Package – TO–66
• OUTPUT VOLTAGE RANGE OF:
1.25 TO 40V FOR STANDARD VERSION
1.25 TO 50V FOR –HV VERSION
• 1% OUTPUT VOLTAGE TOLERANCE
1 2 3 1 2 3
!
1 2 3
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Prelim. 7/00
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
IP137A SERIES LM137A SERIES
IP137A SERIES LM137A SERIES
IP337A SERIES
IP337A SERIES
1) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to
heating effects are covered under thermal regulation specifications. Load regulation is measured at a point 1/8” from the bottom of
the package for the TO–3 and TO–66 packages, at the junction of the wide and narrow portion of the output lead for the SMD1
package, and 1/8” below the base of the package on the output pin of the TO–257 package.
2) Test Conditions unless otherwise stated: VIN – VOUT = 5V , IOUT = 0.5A , PMAX = 20W , IMAX = 1.5A
VMAX = 40V for standard series , 50V for HV series.
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Prelim. 7/00
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
IP137A SERIES LM137A SERIES
IP137A SERIES LM137A SERIES
IP337A SERIES
IP337A SERIES
IP337HV
IP337AHV LM337HV
Parameter Test Conditions Min. Typ. Max. Min. Typ. Max. Units
IOUT = 10mA -1.238 -1.25 -1.262 -1.213 -1.25 -1.287 V
IOUT = 10mA to IMAX
VREF Reference Voltage
VIN – VOUT = 3V to VMAX -1.220 -1.25 -1.280 -1.200 -1.250 -1.300 V
P £ PMAX TJ = 0 to 125°C
DVOUT VIN – VOUT = 3V to VMAX 0.005 0.010 0.010 0.040
Line Regulation 1 %/V
DIOUT TJ = 0 to 125°C 0.010 0.030 0.020 0.070
IOUT = 10mA to IMAX VOUT £ 5V 5 25 15 50 mV
DVOUT VOUT ³ 5V 0.1 0.5 0.3 1 %
Load Regulation 1
DIOUT IOUT = 10mA to IMAX VOUT £ 5V 10 50 20 70 mV
TJ = 0 to 125°C VOUT ³ 5V 0.2 1 0.3 1.5 %
Thermal Regulation tp = 10ms TA = 25°C 0.002 0.020 0.003 0.04 %/W
CADJ = 0 60 66 60 dB
VOUT = 10V
Ripple Rejection CADJ = 10mF
f = 120Hz 70 80 66 77 dB
TJ = 0 to 125°C
IADJ Adjust Pin Current TJ = 0 to 125°C 65 100 65 100 mA
IOUT = 10mA to IMAX 0.2 2 0.5 5
DIADJ Adjust Pin Current TJ = 0 VIN – VOUT = 3V to 40V 1.0 5 2 5
mA
Change to 125°C VIN – VOUT = 3V to 50V
2.0 6 3 6
(HV SERIES)
IMIN Minimum Load VIN – VOUT £ 40V 2.5 5 2.5 10
TJ = 0 to 125°C mA
Current VIN – VOUT £ 10V 1.2 3 1 6
VIN – VOUT £ 15V 1.5 2.2 3.5 1.5 2.2 3.5
VIN – VOUT = 40V 0.24 0.4 1 0.15 0.4
ICL Current Limit TJ = 0 to 125°C A
VIN – VOUT = 50V
0.2 0.4 0.8 0.1 0.4 0.8
(HV SERIES)
DVOUT Temperature
TJ = 0 to 125°C 0.6 1.5 0.6 %
DTEMP Stability
DVOUT
Long Term Stability t = 1000 Hrs 0.3 1 0.3 1 %
DTIME
en RMS Output Noise f = 10 Hz to 10 kHz
0.003 0.003 %
(% of VOUT) TA = 25°C
RqJC Thermal Resistance K Package 2.3 3 2.3 3
°C/W
Junction to Case T Package 4 5 4
1) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to
heating effects are covered under thermal regulation specifications. Load regulation is measured at a point 1/8” from the bottom of
the package for the TO–3 and TO–66 packages, at the junction of the wide and narrow portion of the output lead for the SMD1
package, and 1/8” below the base of the package on the output pin of the TO–257 package.
2) Test Conditions unless otherwise stated: VIN – VOUT = 5V , IOUT = 0.5A , PMAX = 20W , IMAX = 1.5A
VMAX = 40V for standard series , 50V for HV series.
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Prelim. 7/00
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
IP137A SERIES LM137A SERIES
IP137A SERIES LM137A SERIES
IP337A SERIES
IP337A SERIES
APPLICATIONS INFORMATION
High Stability Regulator Multiple Tracking Regulators
The output stability, load regulation, line regulation, thermal In the application shown below, regulator #2 to “N” will track
regulation, temperature drift, long term drift, and noise, can be regulator #1 to within ±24mV initially, and to ±60mV over all load,
improved by a factor of 6.6 over the standard regulator line, and temperature conditions.
configuration. This assumes a zener has 20PPM/°C maximum If any regulator output is shorted to ground, all other
drift and about 10 times lower noise than the regulator. outputs will drop to -2V. Load regulation of regulators 2 to “N” will
be improved by VOUT / 1.25V compared to a standard regulator,
so regulator #1 should be the one which has the lowest load
current.
R 2*
7V
C3
2 µF 1 0µF R2
R3 R1 1 µF C1
1µF
1 .5 k 1k SO LID
1% 1% TANT ALUM SO LID
TAN TALU M
1 N4 0 0 2 R1
AD J AD J 1 20 Ω
VIN VOU T VIN VOU T
–VIN –VO U T –VIN –VO U T1
( VO U T ) R EG #1
* R2 = – 908 Ω
9.08 x 10 -3
IP337A IP137A
1µF
IP3 17A 2 µF SO LID
1 N4 0 0 2 TANTA LU M
AD J
VIN VOU T VIN VOU T
+VIN +VO U T –VO U T2
R EG #2
ADJ
IP137A
R1* *
1 00 Ω D1
1% 2. 2 1N40 02
µF
R2 1µF
1 0µ F 5k
1% 2 µF SO LID
R3 1 N4 0 0 2 TANTA LU M
5k
AD J
VIN VOU T
R4
–VO UT N
1 0µ F 5k R EG #N
1%
I P 13 7 A
2. 2
R5* * µF
1 00 Ω
1% D2
1N40 02
ADJ
C1
VIN VOU T 1 µF
–VIN –VO U T SO LID
AD J TANA TALU M
VIN VOU T I
IP3 37A (–) (+)
RS