Professional Documents
Culture Documents
Maintenance Interval Schedule: When Required
Maintenance Interval Schedule: When Required
Page 1 of 4
Shutdown SIS
Previous Screen
Ensure that all safety information, warnings, and instructions are read and understood before any
operation or any maintenance procedures are performed.
The user is responsible for the performance of maintenance. All adjustments, the use of proper
lubricants, fluids, filters, and the replacement of components due to normal wear and aging are
included. Failure to adhere to proper maintenance intervals and procedures may result in
diminished performance of the product and/or accelerated wear of components.
Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST,
in order to determine the maintenance intervals. Products that operate in severe operating
conditions may require more frequent maintenance. Refer to the maintenance procedure for any
other exceptions that may change the maintenance intervals.
Note: Before each consecutive interval is performed, all maintenance from the previous interval
must be performed.
Note: If Cat HYDO Advanced hydraulic oils are used, the hydraulic oil change interval is
extended to 3000 hours. S·O·S services may extend the oil change even longer. Consult your Cat
dealer for details.
When Required
Battery - Recycle
Battery or Battery Cable - Inspect/Replace
Bucket Cutting Edges - Inspect/Replace
Bucket Tips - Inspect/Replace
Bucket Tips - Inspect/Replace
Cab Interior - Clean
Engine Air Filter Primary Element - Replace
Engine Air Filter Secondary Element - Replace
Engine Air Precleaner - Clean
Engine Compartment - Clean
Film (Product Identification) - Clean
https://192.168.0.142:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/... 30-Nov-20
416E Backhoe Loader Single Tilt Center Pivot MFG00001-UP (MACHINE) POWER... Page 2 of 4
https://192.168.0.142:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/... 30-Nov-20
416E Backhoe Loader Single Tilt Center Pivot MFG00001-UP (MACHINE) POWER... Page 3 of 4
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
https://192.168.0.142:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/... 30-Nov-20
416E Backhoe Loader Single Tilt Center Pivot MFG00001-UP (MACHINE) POWER... Page 4 of 4
Every Year
Every 3 Years
https://192.168.0.142:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/... 30-Nov-20