Professional Documents
Culture Documents
Wrist Watch Walkie Talkie User Manual
Wrist Watch Walkie Talkie User Manual
Wrist Watch Walkie Talkie User Manual
Manual
RD-008B
1
CONGRATULATIONS!
You have purchased one of the smartest and smallest devices with a unique hand-flexing
operation feature. The lightweight and compact wrist watch style device can be operated
conveniently with a simple flex of your wrist.Its ideal to stay connected with family or friends
at parks, shopping malls, sporting events, concerts-virtually any indoor or outdoor activities.
Key features about this device:
·
● Multi Channels
● 38 CTCSS,83 DCS sub-channel
● Duplex(range extender)
● Up to 6KM Range
● Wrist Watch Style with Adjustable Band
● Scrambler function
● Compander function
● TOT function
● Power off resume
● Low battery checking
● Auto Squelch
● Auto Battery Saving
● Internal VOX (3 adjustable voice volume)
● Channel Scan
● Digital clock(12/24 Hour mode)
● 10 mode of call tone
● Reminding tone after transmission over
● LCD Display
● Lithium-Ion Battery with charger
Read this Owner’s Manual carefully and you’ll get the most out of your two-way wrist
watch communicator.
LCD Screen
1.Channel Number, Displays current channels
2.CTC: display 38 CTCSS/83 DCS sub-channel
3.Battery Level indicator: display battery status
2
4.Time: will display time mode
5.Channels: Display channels
6.Volume level: Adjustable 8 volume level
7.Receive Indicator (RX)-Indicates when unit is receiving transmissions
8.Transmit Indicator (TX)-Indicates when untit is transmitting.
9.Channel scan
10.Alarm clock
11.Call Tone Transmission (CALL)-Indicates When unit is paging.
12.Key lock: it displays when lock key
13.VOX-Indicates when unit is in VOX mode
14.Date: displays Year/month/date
15.AM/FM: If time is 12Hour mode, will display AM/FM
16.Week: displays week
3
Important: Changes or modifications to this unit not approved by
manufacturer/Communication Authority could void your right to operate this unit. Your
communicator is set up to transmit a regulated Signal on an assigned frequency. It is against
the law to alter or adjust the settings inside the communicator to exceed those limitations.
Any adjustment to your communicator must be made by qualified technicians.
Hazardous Environments:
Do not operate the communicator in hazardous environments , explosion or fire may
result. Do not operate the communicator near unshielded electrical blasting caps. Under
certain conditions, communicators can interfere with blasting operations and may cause an
explosion. Turn your communicator to the OFF position to prevent accidental transmission
when in a blasting area or in areas posted : “Turn off two-way radios.” Construction crews
often use remote control RF devices to set off explosives.
Safety Information
Your wireless hand-held portable transceiver contains a low power transmitter. When the
Red Button is pushed it pushed is sends out radio frequency (RE) signals. This device is
authorized to operate at a duty factor not to exceed 50%.
Important Note: To maintain good communication quality, hold the transmitter at least
2inches (5 centimeters) from your mouth and speak in a normal voice.
BATTERY INSTALLATION
Your communicator is powered by a Lithium-Ion Battery (included).To install
and replace battery:
1.Release the Battery Compartment Cover Latch located on the rear side of the unit, and
4
remove the cover from Battery Compartment.
2 . Install the Lithium-Ion battery into the Battery Compartment. Be certain to follow the
correct orientation in the compartment. A Battery installed incorrectly can prevent the
unit from operating.
3. Replace the Cover and lock the battery Compartment Cover Latch into position
Battery Battery
Compartment Compartment
Cover Latch Cover
CAUTION:
To reduce the risk of personal injury, use only the battery listed in the instruction book. The
communicator has a built in Power Saver feature for maximum battery life. When the
communicator is not being used, conserve battery power by pressing the Power Key to turn
OFF the unit, Remove the battery if the unit will not be used for a long period of time.
Headset/Charger
Jack Cover
NOTE:
The communicator comes with internal battery protection; however, during
long-term storage, it is strongly recommended that you
BATTERY LEVEL AND LOW BATTERY recharge
OPERATIONthe battery every
In6Watch
monthsand
or remove the battery
Communicator if thethe
Mode unitLow
will not be used
Battery for icon
Level a long period
will of time. on
not appear
5
BATTERY LEVEL AND LOW BATTERY OPERATION
In watch and Communicator Mode the Low Battery Level icon will not appear on
the display unless the unit detects that the battery is low .The unit has a low battery level
icon which will appear when it detects a low battery level in Communicator mode, and in
Watch Mode. When the unit is in Communicator Mode and the battery level is low the icon
will appear for approximately 15 seconds and then will automatically change to Watch.
Watch Mode
To enter or exit watch Mode, press the Power key for around 3 seconds. A long keybeep
tone is locally generate(after a short keybeep tone) when the unit goes into Watch Mode
and the LCD will display the time segments and battery icons for the watch.
Communication Mode.
1 . Your communicator will automatically go to communicator Mode once the battery is
installed, the watch segments and channel icons will be displayed on the LCD during this
mode. Press the Menu key for about 3 seconds to enter the Watch Setting Mode; a short
keybeep tone will be locally generated when the Time Setting mode is engaged.
2 . In Communicator Mode, if presses of the Menu key for no longer than 1 second will
advance you through the menu until exiting to communicator mode.
3 . Menu mode exits and to standby mode when the Menu key is pressed while the final
menu selection is active.
4.The unit automatically enters Watch mode
In 10 minutes..
Menu Key
NOTE: In Watch Mode, no button/key will function unless pressing menu key for about 3
seconds to enter Communication Mode
6
To set the Time(watch mode)
Your Communicator has a 12/24-hour Time Clock, which can be set as follows:
1.In Communication mode, enter to Menu mode by long time pressing the Menu key unitil a
short key-beep tone is heard. When the time Setting mode is engaged, the Hour segment
in the LCD Display will flash.
2.Press the Menu button 7 times, screen will display 12/24-hour mode setting, by press S
button to start to set, press Up or Down key to select 12 or 24H mode. To press S button
to confirm, if you choose 12H mode, screen will display AM/PM.
3.Date setting: By press Menu button 2 times, screen will display 00 01 01(year/month/date),
by press S button to select year/month/date, press UP, Down button to select date, press
S button to confirm setting.
4 . Time setting: by press Menu button 3 times, screen will display 12 00 00,
(hour/minute/second), by press S button to select hour/minute/second, by press
UP,Down button to adjust time , to press S button to confirm setting . when setting time,
screen will display AM or PM if time mode is 12hour mode.
5.Stopwatch setting: by press MENU button 4 times, screen will display stopwatch mode 00
00 00, to press PTT button to start time count; time count will pause by press PTT again;
to continue time count by press MENU button again; by press UP, DOWN button for
zeroing,
6.Clock countdown setting: Press MENU button 5 times, screen display clock countdown
mode 00 00 00 (minute/second/millisecond), to press S button to select
minute/second/millisecond and press UP, DOWN button to select time then press S
button to confirm setting; by press PTT button to start countdown, press PTT again to
make countdown pause and to press PTT continue to countdown.
7 . Alarm clock setting: to press MENU button 6 times, enter alarm clock mode, Screen
display OF and clock icon. Press PTT button to set alarm clock mode 12 00
00(hour/minute/second), by press S button to select hour/minute/second and by press
UP, DOWN button to adjust time, to press S button to confirm setting, then screen will
display alarm clock icon, when time is up, alarm clock will ring. Exit the alarm clock mode
by press any button.
8 . Key lock setting: under the watch mode, by press menu button one time and press S
button quickly to lock all button; under the communication mode, by long time press S
button to lock all buttons except for PTT button, same operation apply to unlock button.
7
from 1~8 and 41~48)
B. Press the MENU button twice, RPT icon will display in screen
C. Press UP or Down button to set the duplex function to On or Off
D. Press PTT button to confirm your setting.
E. The RPT icon will display to indicate that duplex is set on that channel
Receive channel 1 2 3 4 5* 6 7 8
Receive channel 41 42 43 44 45 46 47 48
Transmit channel 71 72 73 74 75 76 77 78
Important
● Speech transmissions are not allowed on channel 22 and 23(receive only)
● CTCSS and call ring tone calling should be disabled on channel 5 and 35
● If call ring tone calling is provided, it is only allowed to operate for a maximum of 3
seconds and it can only be possible to operate once in any 60 seconds period
8
press PTT button to confirm setting.
2 . 38 group of sub-channel selection: Press MENU button two times, CTC code keep
flashing, press the Up or Down button to select 38 group of sub-channel from 1 to 38
channels, and screen will display CTC character under CTC code, press PTT button to
confirm setting. CTC code Default setting is 00 when power on..
3.83 group of DCS sub-channel setting: press MENU button 2 times, CTC code will be keep
flashing, press UP or Down button to select 83 group of DCS sub-channels from 1 ~83,
press PTT button to confirm setting, there is no CTC character displayed in screen under
CTC code, CTC code Default setting is 00 when power on
■ Scrambler setting
( voice encryption function, communication party must set compander as on)
Press MENU button 7 times, screen will display SC OF character, character OF keep
flashing, by press UP or Down button to choose ON or OFF, press PTT to confirm setting.
Default SC setting is on.
■ Compander setting
Press MENU button 6 times, screen will display CP on, character on keep flashing,
press UP or Down button to choose ON or OF , press PTT button to confirm setting,
compander default setting as on when power on ( when CP on, conversation voice will be
more clear, communication range is more far, when CP Off, conversation voice quality will
be poor when communication range is a little far )
■ Channel Scan
To scan the whole channels of the Communicator for any activity:
1.Press the Scan key found on the side of the unit. Once engaged, the unit will start to r
apidly scan the whole channels of the communicator for any activity. The unit will pause
on an active channel for 4~5seconds before resuming Scan function.
2.To exit the Scan mode, press the Red button.
9
Your communicator has a unique circuit designed to dramatically extend battery life.
Press menu button 5 times, screen will display PS OF character, OF keep flashing, by
press UP or Down button to choose ON or OF, press PTT button to confirm setting. Default
power save setting as OF, (under communication mode, if no any operation and receive
signal for unit, unit will enter watch mode), The communicator can still receive
transmission in this mode.
10
To send a Call Alert Tone, Press the Red Button twice in a rapid action. The Call Alert
Tone will be automatically transmitted for a factory-set fixed length of time. During
transmission, the Call icon appears on the display. You’ll hear a brief Call Alert Tone to
confirm operation. The communicator returns to standby mode when the Call Tone sequence
is complete. For optimum performance, make sure the ANTENNA is pointing upright.
By press MENU button 3 times, screen will display VX character, character OF keep flashing,
press UP or Down button to choose on or off.
Press UP or Down button to select voice level( from 1 to 3 level) , by press PTT button to
confirm setting. VOX Default setting as off
To get the full advantage of the convenience of a hands free transmission and the
privacy of conversation, you can optionally use an Ear Bud with Microphone to be
used in conjunction with the VOX feature of your communicator.
11
·To change channels, press the MENU key until the channel
Cannot
Number flashes on the LCD Screen.
Change
·Press the UP or DOWN key to change channel.
Channels
·Battery may be weak.
Taiwan(14ch)
Ch. Frequency Ch. Frequency Ch. Frequency Ch. Frequency
12
Europe(8ch)
Ch. Frequency Ch. Frequency Ch. Frequency
1 446.00625 4 446.04375 7 446.08125
2 446.01875 5 446.05625 8 446.09375
3 446.03125 6 446.06875
USA(22ch)
Ch. Frequency Ch. Frequency Ch. Frequency Ch. Frequency
1 462.5625 7 462.7125 13 467.6875 19 462.6500
2 462.5875 8 467.5625 14 467.7125 20 462.6750
3 462.6125 9 467.5875 15 462.5500 21 462.7000
4 462.6375 10 467.6125 16 462.5750 22 462.7250
5 462.6625 11 467.6375 17 462.6000
6 462.6875 12 467.6625 18 462.6250
Korea (25ch)
Ch. Frequency Ch. Frequency Ch. Frequency Ch. Frequency
Australia(80ch)
TX RX TX RX
Channel Freq Freq Channel Freq Freq
MHZ MHZ MHZ MHZ
01* - 476.4250 476.4250 21 - 476.9250 476.9250
- 41 * - 476.4375 - 61 * * - -
02 * - 476.4500 476.4500 22 * - 476.9500 476.9500
- 42 * - 476.4625 - 62 * * - -
03 * - 476.4750 476.4750 23 - 476.9750 476.9750
- 43 * - 476.4875 - 63 * * - -
13
04 * - 476.5000 476.5000 24 - 477.0000 477.0000
- 44 * - 476.5125 - 64 477.0125 477.0125
05 * - 476.5250 476.5250 25 - 477.0250 477.0250
- 45 * - 476.5375 - 65 477.0375 477.0375
06 * - 476.5500 476.5500 26 - 477.0500 477.0500
- 46 * - 476.5625 - 66 477.0625 477.0625
07 * - 476.5750 476.5750 27 - 477.0750 477.0750
- 47 * - 476.5875 - 67 477.0875 477.0875
08 * - 476.6000 476.6000 28 - 477.1000 477.1000
- 48 * - 476.6125 - 68 477.1125 477.1125
09 - 476.6250 476.6250 29 - 477.1250 477.1250
- 49 476.6375 476.6375 - 69 477.1375 477.1375
10 - 476.6500 476.6500 30 - 477.1500 477.1500
- 50 476.6625 476.6625 - 70 477.1625 477.1625
11 - 476.6750 476.6750 31 * - 477.1750 477.1750
- 51 476.6875 476.6875 - 71 * 477.1875 -
12 - 476.7000 476.7000 32 * - 477.2000 477.2000
- 52 476.7125 476.7125 - 72 * 477.2125 -
13 - 476.7250 476.7250 33 * - 477.2250 477.2250
- 53 476.7375 476.7375 - 73 * 477.2325 -
14 - 476.7500 476.7500 34 * - 477.2500 477.2500
- 54 476.7625 476.7625 - 74 * 477.2625 -
15 - 476.7750 476.7750 35 * - 477.2750 477.2750
- 55 476.7875 476.7875 - 75 * 477.2875 -
16 - 476.8000 476.8000 36 * - 477.3000 477.3000
- 56 476.8125 476.8125 - 76 * 477.3125 -
17 - 476.8250 476.8250 37 * 477.3250 477.3250
- 57 476.8375 476.8375 - 77 * 477.3375 -
18 - 476.8500 476.8500 38 * - 477.3500 477.3500
- 58 476.8625 476.8625 - 78 * 477.3625 -
19 - 476.8750 476.8750 39 - 477.3750 477.3750
- 59 476.8875 476.8875 - 79 477.3875 477.3875
20 - 476.9000 476.9000 40 - 477.4000 477.4000
- 60 476.9125 476.9125 - 80 477.4125 477.4125
Important note:
The operation of your UHF radio in Australia and Zew Zealand is subject to conditions in
the follwing licenses:
In Australia the ACMA radio communications (citizen band radio stations) and in new
zealand by MED the general user radio license for citizen band radio.
14
*The primary use for these channels is repeater operation using 750kHZ offset. Channels
1-8 and 41-48 inclusive are used for mobile reception and channels 31-38 and 71-78 for
mobile transmission.In addition, any designated repeater channel maybe used for simplex
operation in areas where it is not used for repeater operation.
Channel 5 and 35(paired for Duplex repeaters) are reserved as emergency channels and
should be used only in an emergency.
CTCSS and DCS will not operated on channel 5 and 35.
A list for currently authorized channels can be obtained from the ACMA website in
Australia and MED website in ZEW Zealand Channel 11 is a calling channel generally used
to call others and channel 40 is the customary road vehicle channel.
Once contact is established on the calling channel, both stations should move to another
unused “SIMPLEX” channel to allow others to use the calling channel.
SPECIFICATIONS
Power Source 3.7V/650mAH Lithium-Ion Battery
Output Power (TX) 0.5W ERP maximum
Battery Life 3Years
Range ≤6.0 Kilometers ( Can make range as long as
expected by customer by provide extra service )
15
Warranty Card
We provide one-year free maintenance.should this product fail to perfomnormally
within the warranted period,it will be repaired with the same or functionally equivalent
product.
This warranty does not apply if,the product fails due to damage from
shipment,handling.storage.accident,abuse or misuse.or if it has been used or maintained in
a manner not conforming to product manual instructions,has been modified in any way,or
has had any serial mumber removed or defaced.
The maximum liability of us under this warranty is limited to the purchase price of the product
covered by the warranty.
The reseller should fill in the following form for after-sale service.The buyer shoule retain
proof of purchase and this warranty card.
Product name Watch Walkie Talkie
Post address
Code
Reseller name
Repair record Reseller Signature and stamp
Address:
TEL:
16