Professional Documents
Culture Documents
Installation Instructions - Roof Hydrant Model SRH-MS - Woodford
Installation Instructions - Roof Hydrant Model SRH-MS - Woodford
Installation Instructions - Roof Hydrant Model SRH-MS - Woodford
SRH-MS
Rev 06/10 Form No. IISRH.102
Sanitary Roof Hydrant • The complete SRH-MS Roof Hydrant with Mounting
System is shipped in 2 separate cartons.
No drain line required!
See carton contents below.
• Both cartons are required to complete the Roof
hydrant installation.
• The following installation instructions are suggested
for installing on a typical corrugated steel roof
t
10579
HYDRANT SUPPORT
10584 (4)
5/8" X 6" HEX BOLT
HYDRANT 10581
SHIM
10580
UNDER DECK FLANGE
BOOT
10607 (3)
CLAMP SCREWS
WELL SEAL
10604 (4)
5/8 PLAIN WASHER
10605 (4)
5/8 LOCK WASHER
10585 (4)
5/8 HEX NUTS
SRH-MS CARTON 1 CARTON 2
Complete
Roof Hydrant & SRH RH-MS
Mounting System CONTENTS CONTENTS
Shipped in Cartons 1 & 2 SRH Hydrant Hydrant Support – cast iron
Well Seal 2” Shim – cast iron
Boot Under Deck Flange – cast iron
Mounting Bolts, Nuts & Washers
RHMS
Rev 06/10 Form No. IISRH.102
SRH-MS
Rev 06/10 Form No. IISRH.102
61” O.A.L.
(5’-1”)
20” MIN.
RESERVOIR
3/4”
NO DRAIN LINE REQUIRED