Professional Documents
Culture Documents
Shpilman - EM Torsion Field Generator Principles
Shpilman - EM Torsion Field Generator Principles
A.A.Shpilman
The attached figure suggests the design of a magnetodynamic generator of an axion field in which a rotating
or “precessing” magnetic field with a vortex vector potential can be excited. (See also the prepatent of the
Republic of Kazakhstan No. 5366 G01N23 / 00 Bull. No. 4 dated 10/15/97)
A sample of substance 8 is placed inside the described construction, in which axion fields and radiation are
induced due to the combination of the vortex vector potential and the precessing magnetic field relative to
axis 7.
The operation of the device in many ways resembles the operation of devices for obtaining NMR and EPR
spectra, but, in contrast to them, the main task is to orient the vectors of spins of the elements of a substance
in one direction.
The advantage of this generator design compared to previously described in the joint venture ( No. 3/95 , No.
5/95 , No. 2/96 ) is the possibility, by varying the parameters of the vortex vector potential and the
precessing magnetic field, to create sample 8 in and through the material surrounding space, axion fields
with characteristics tunable in wide aisles.
The maximum strength of the axion field is achieved if the precession frequency of the magnetic field is
chosen, which is twice as large as the Larmor frequency of the nuclei (electrons) of the atoms.
As experiments have shown, when a rotating magnetic field with a single frequency is used in this generator,
the flux of “axion” radiations is much larger than in generators with mechanical rotation, which may be
associated with a significant increase in the temperature of spin vibrations of the substance of sample 8, but
spinfield.idhost.kz/ALMANACH/N3_96/Na_2.htm 1/2
6/8/2020 AND
at the same time, the strength of the resulting axion field is obtained of the same order as in the described
generators using mechanical rotation, despite the possibility of using significantly higher rotation speeds.
Possible causes of this phenomenon and ways to further increase the axion field strength are described in the
article " Multi-frequency excitation of axion field generation ".
Concluding observations
An unexpected result of experiments with a magnetodynamic axion field generator was the
discovery of the possibility of generating a unidirectional axion beam without using any
reflector. From which we can conclude that the spin and magnetic moment of electrons (protons)
are not the same thing, and the properties of the axion field are qualitatively different from the
properties of the magnetic field.
In conclusion, I want to note that, in the work with the axion field generators described in the
joint venture, P.M. Myachin, O.V. Pankova, S.V. Pisareva, O. A. Savitskaya, V. I. Solozhenkin, A
played a large role .V. Tyurin. I also want to note the help of sponsors - I.S. Lis and V.Kh.
Aminova.
Thematic Content
CONTENT
spinfield.idhost.kz/ALMANACH/N3_96/Na_2.htm 2/2
6/8/2020 EdynamicA
A.A.Shpilman (alexandrshpilman78@gmail.com)
Russian
Fig..1 Fig..2
On Fig.1 the design of the generator based on this idea is represented. In it 1 - iron tube; 2 - electrical
toroidal coil; 4 - ferrite tube; 5 - cylindrical electrical coil; 6 - active element (for example, ferrite with small
electrical conductivity); and 3 - drum with vertical plates of electrodes (see Fig.2) creating in an active
element 6 electrical fields perpendicular axes 7.
The practice has shown what more effective to use rotation of a vector quadrupole of an electrical field.
Therefore, if we use a drum with six electrodes that, it is necessary to close electrically opposite electrodes
and give on them a variable three-phase electrical voltage.
If an element 6 – a ferrite cylinder with a diameter ~ of 1 centimeter, that optimum frequency of a three-
phase voltage ~ 1.5 - 3 megahertz. The frequency depends on speed of distribution of indignation of "axion
field" in an element 6 and its diameter.
The magnetic field of the cylindrical coil is set to two order less than in " the Magnetodynamics generator of
axion field", and it does not play the special role, slightly changing quality and intensity of "axion field".
The most interesting effect in the given design that, the beam of "axion field" changes the direction at change
of frequency of a three-phase voltage (it leaves upwards, downwards).
The intensity of "axion field" grows a little if to add to a three-phase voltage high-frequency voltage of small
amplitude with frequencies ~ 7, 12 and 36 megahertz.
spinfield.idhost.kz/ALMANACH/3n99/EdynamicA.htm 1/2
6/8/2020 EdynamicA
There can be a great number of variations of the given design. For example, in figure
3 the multicascade generator of "axion field" is shown, where 2 –a ferrite core, to
which the electrodes of a drum 1 pressed (see Fig.2) and on which the electrical coils
3 reeled. The electrical coils 3 have counter inclusion, so in a zone of electrodes 1, in
a ferrite core 2, the constant radial magnetic field is formed.
On electrodes 1 the three-phase electrical field moves, so in the next drums the
electrical field rotates in the opposite direction.
For designing this generator it is convenient to use analogy of a string of "axion field"
as charged conductor of an electrical current (see "Physical properties of axion (spin)
fields").
This design has an essential lack: the strings of axion field in a zone of ferrite coils 3,
crossing a magnetic field, get a pulse directed perpendicularly to axis of the device.
For reduction of emission of these strings over scopes of the generator, are used the
toroidal coils 4.
Iron tube 5 improves "feedback" along the "axion field", press tore of "axion field"
from sides. Fig..3
Gennadiy P.Ivanov and Pavel M.Miachin actively took part in experiments with the described generators.
Thematic Contents
CONTENTS
spinfield.idhost.kz/ALMANACH/3n99/EdynamicA.htm 2/2
6/8/2020 EMmechA
Russian
A.A.Shpilman (alexandrshpilman78@gmail.com)
impulse of a beam moving from the generator, will decrease (and length of a beam will
decrease). Such voltage is possible to pick up, at which maximum density of a field in
specific area will be.
In difference from the earlier described generators using mechanical rotation, in the
given generator main is the linear speed of motion of the copper disk (and intensity of a
magnetic field). Therefore, "axion field" will have the form of a pipe moving upwards
and downwards from perimeter of the copper disk.
Fig.3
In generation of "axion field" the main role is played a surface of the copper disk (it is
characteristic for conductors), therefore it is meaningful to make it more thin as it is possible and carefully
clear its surface.
For increasing of intensity of "axion field" it is possible to cover a lower surface of the copper disk with a
thin layer of an "alloy Rose" (or tin), and to cover upper surface with a thin layer (spirituous of a solution)
colophony. Probably, will be the interesting effects, if instead of the copper disk you will rotate fluids
(melts). For example, mercury or gallium. If thus there will be hashing fluid, that the "actuated" nucleuses of
atoms will be continuously move from a surface deep into of fluid, and on a surface will be continuously
occur not actuated ones. Probably, thus, it will be possible to actuate all volume of fluid (melt, and then it is
possible to cool a melt).
The efficaciousness of the given generator is very high, therefore be cautious and obey the accident
prevention.
Thematic Contents
CONTENTS
spinfield.idhost.kz/ALMANACH/2N99/EMmecha.htm 2/2
6/8/2020 ?
Russian | Italiano
The author of the data of lines has done a bit of travelling on much to open spaces of former Soviet Union,
met and meets the people engaging "non-traditional" sciences. Unfortunately, at many from them on soil
mania of greatness and hidden of fears to remain with anything, the illness of secrecy was showed, though if
attentively to consider, that they have, it is possible to reach in a conclusion, that contents do not cost and not
worth twopence or anyway that they have is small grain of knowledge, on the basis of which in the single
anything will not achieve. This illness results in self-isolation, to loss of creative activity and at the end
results in apathy.
The way of knowledge is infinite. The creative person always will be than to gift of ambient, and at the
fruitless man and that is present, will not give sprout.
As axion of a field and the radiation cooperate, in basic, only with spin of electrons and nucleuses of atoms,
it is meaningful to try to change a direction of propagation axion radiation at the expense of orientation these
spins. That is, the change of a direction of propagation of energy axion radiation is possible to achieve by the
reflector with the induced or internal anisotropy focused perpendicularly to a direction of propagation of
radiation of a source, with deviation from perpendicularity on a angle which is not exceeding of a angle
"precessions" of spin of active elements of the reflector, rather this anisotropy.
Generally, the axion radiation, penetrating in any material and cooperating with backs of its making
elements, orientates them on a direction of an axis of radiation. In result the spin channel is formed, along
which there is a propagation of energy axion of radiation. If of elements of a material are already guided
perpendicularly to direction axion of a field, there is absorption of energy axion of radiation and re-emission
take place in a direction of orientation of interacting a spin (in our case within the limits of a cone of
precession a spin). The average change of a direction of propagation of energy axion radiation makes 90
degrees at such reflection.
In the device described in N3/95 axion the radiation occurs along rotation axis in both directions (two rays of
opposite polarization).
The device (Reflector) shown on figure generates unidirectional axion radiation (See also patent of Republic
of Kazakhstan N5365 G01N23/00, bull. N4, 15.10.97).
In which, hollow the cylinder 2 is made from a ferromagnetic material with built-in constants by magnets
(see N3/95). A cone of the reflector 3 with a covering ring 4, are made of silver or cadmium, with thickness
of walls of 1 mm (the large thickness is not meaningful, as works in a main surface) both angle between an
axis and forming of a cone equality to 30 degrees.
The return ray of axion radiation 5 hollow of the cylinder 2 radiators, dropping on a surface of a reflecting
cone 3 under a angle to it, equal to precession angle spin of electrons and nucleuses of atoms of a cone
concerning an axis of an anisotropy called by a gradient of concentration on border of the unit of
environments (for example metal - oxide-air), cooperates with last, therefore energy of axion radiation of a
ray 5 re-emit on a direction of the data spin. Thus, is formed axion radiation (reflected) as a ray 6, which as a
result of spatial interaction with a direct ray 7, forms in space closed axion a field in the form of the extended
spinfield.idhost.kz/ALMANACH/N5_95/Reflect.htm 1/2
6/8/2020 ?
Thematic Contents
CONTENTS
spinfield.idhost.kz/ALMANACH/N5_95/Reflect.htm 2/2
6/8/2020 The High-Voltage Generator of the "Axion Field"
Russian
Presumably, for synthesis of DS-state elements it is necessary to spend energy not less than 10000 eV on one
convertion a proton. Interest to electric fields of a high voltage therefore is natural.
MOUSTACHE of a proton (see "Physical properties of axion (spin) fields") is partly oriented on a direction
of an electric field, twisting in a secondary spiral, but thus, usually there is no necessary quantity of
deformation of its spectrum. Probably, parent in phase auto tuning of pseudo-negative and pseudo-positive
THREADS of the "global line" of a proton.
spinfield.idhost.kz/ALMANACH/2n01/HVe.htm 1/3
6/8/2020 The High-Voltage Generator of the "Axion Field"
The split in space of pseudo-negative and pseudo-positive THREADS of a proton (material of a wire 1)
occurs in a gap between wires 2 and 3. And the pulsatory high voltage deepens it of split of a MOUSTACHE
of a proton. This action similarly to unfastening of the lock for clothes - "lightning".
spinfield.idhost.kz/ALMANACH/2n01/HVe.htm 2/3
6/8/2020 The High-Voltage Generator of the "Axion Field"
The described construction creates radiation perpendicularly planes of the condenser and along a plane of the
condenser. In all three directions the quality of radiation differs.
Carbonyl the iron and carbonic copper can be exchanged by sand from
a crystalline quartz. Thus the positive lead plate 3 is exchanged with a
plate from a bismuth or cadmium. In result the intensity of radiations
decreases, but their quality becomes more favorable for the man.
Fig.8
Thematic Contents
CONTENTS
spinfield.idhost.kz/ALMANACH/2n01/HVe.htm 3/3
6/8/2020 The High-Voltage Generator of the "Axion Field"
Reasoning from the already known information an attempt to improve "Chizhevsky's luster" is also interested to
us.
The corona discharge on a thin tungstic electrode 2 ionizes air, this induces ions with a positive charge. A
difference of a voltage in 130V between electrodes 1 and 2 is strengthened by splitting between components of
the "axion fields" with the negative and positive electric pseudo-charge (see Fig. 6) of these ions (the first act of
DSS elements’ generation). The ions with a positive charge drift to the electrode 3 where their recharge occurs
(change of a sign on a charge on the opposite one). Then the ions with the negative charge in the drift pass the
electrodes 4, 5 and leave our design. The electrodes 4, 5 make the stream of air between the dielectric plates 6
more stable (from the left to the right of figure 5). With a stable stream of ions is provided also.
spinfield.idhost.kz/ALMANACH/3n02/HVe.htm 2/3
6/8/2020 The High-Voltage Generator of the "Axion Field"
Probably, it is better to place the design it is horizontal position far away from the walls and other dense,
properly sized objects for saturation of a room by DSS ions. It is desirable to orient the design on the magnetic
field of the Earth (the top cone of the design should be directed on the South Pole of the Earth).
Thematic Contents
CONTENTS
spinfield.idhost.kz/ALMANACH/3n02/HVe.htm 3/3
6/8/2020 The High-Frequency Three-Phase Generator
Fig.1
Connect point A with contact 16 of microcircuits D1, D2; with contact 14 of microcircuits D3 and with contact 8 of microcircuits D4, D5, D6.
Connect point B with contact 8 of microcircuits D1, D2; with contact 7 of microcircuits D3 and with contact 4 of microcircuits D4, D5, D6.
Connect points (output of phases) F1, F2 and F3 with the appropriate electrodes.
Thematic Contents
CONTENTS
spinfield.idhost.kz/ALMANACH/3n00/ShemaA.htm 1/1