Professional Documents
Culture Documents
SHOT BLASTING TWG Evaluation
SHOT BLASTING TWG Evaluation
Accessories
TWG Evaluation Report
viii. End plates must be made Comply Indicated in the Technical Complied
from NM13Mn (JIS) Specification
Austenitic High Manganese pages # 1
Steel or equivalent.
ix. Must have complete Comply Indicated in the Technical Complied
internal liners attached Specification #1
x. Required air volume for dust Comply Indicated in the Brochure Complied
collector is at least 20m3/min pages #2
b. Accessories
i. Must include at least 2 units Comply Indicated in the Technical Complied
spray gun for cleaning Specification pages # 1
ii. Must include dust collecting Comply Indicated in the Technical Complied
system compatible to the Specification pages # 1
shot blasting machine
iii. Must include hydraulic pallet Comply Indicated in the Technical Complied
lifter rated to at least Specification
1000kg pages # 1
iv. One (1) unit electric chipping Comply Indicated in the Technical Complied
hammer with the following Specification
specification; pages # 1
a. rated input power of
atleast 1,025 W
b. impact energy of atleast
6.8 J
v. 1 unit Portable sand blaster Comply Indicated in the Technical Complied
with the following Specification
specifications pages # 1
a. Capacity of at least 10
gallons
b. With sandblaster gun
and hose
c. With assorted ceramic
blast nozzles with the
following sizes
d. PPE (eye, respiratory,
clothing)
c. Bucket loader
d. Documentations
i. Must supply 3 copies manual Comply Indicated in the Technical Complied
with detailed list of Specification
consumable wear pages # 2
components
e. Spare Parts
i. Must include at least 1 set of Comply Indicated in the Technical Complied
endless rubber belt-type Specification
apron conveyor, impeller pages # 1
blades, impeller, distributor
cap, bolts and nuts, body side
liners
f. Controls
i. Must be of separate box, Comply Indicated in the Technical Complied
Touch panel operation, Specification
Direct start type pages # 1
B. Installation
i. Must include all related civil Comply Indicated in the Technical Complied
works, such as site clearing Specification
and removal of old equipment pages # 2
and foundation in the
installation of the equipment
and connection to power,
including breaker and power
cables and other required
utilities
c. Training, Commissioning and
Warranty
i. On-site training on operation Comply Indicated in the Technical Complied
and maintenance Specification
pages # 2
ii. Must include at least 1 year Comply Indicated in the Technical Complied
warranty on parts and Specification
services pages # 2
Upon review of the technical specifications, the Shot Blasting Machine and
Accessories offered by METSERV ENTERPRISE is found COMPLIANT.
FLORENTINO J. LAFUENTE,
TWG Member