Professional Documents
Culture Documents
How To Use A Cylinder Bore Gauge To Measure Cylinder Block
How To Use A Cylinder Bore Gauge To Measure Cylinder Block
How To Use A Cylinder Bore Gauge To Measure Cylinder Block
Cylinder Block
Amrie Muchta 10/24/2017
Advertisement
Why engine can perform a rotation outpu ? it because the engine generating
power from a combustion. The power of combustion pushing down the piston.
But the movement of piston must produce a friction between the cylinder and
the piston ring. In a long time, this friction will cause wear between the two
components. That's why older engine have less power complaints with low
compression pressure.
If the cylinder is worn out, it means the power is also hampered. So it needs to
be over size or replacing this one. But to know whether the engine cylinder is
still feasible or not, we need to make measurements. It will calculating the size
of the cylinders and engine block wear out. So how to step, consider how
measure cylinder block using cylinder bore gauge below.
Before we go any further, let's understand the meaning of these two words.
Tranquility and innovation have different meanings.
Dial gauge. This component will show the size scale with units of milli
meters.
Lock position. This component serves to hold the dial gauge remain
silent when bore gauge is used.
Grip. This component serves as a handle when applying a bore gauge.
Replacement rod. Component of a rod of varying length to measure
many cylinders having different diameters.
Replacement washer. Similar to replacement rod, but replacement
washer has a small thickness. Ranges 0.5 mm.