Professional Documents
Culture Documents
Angle Section Dimensions
Angle Section Dimensions
Disclaimer: The information on this page has not been checked by an independent person. Use this information at your own risk.
ROYMECHX clone of ROYMECH
Shop now
These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard
please use.
BSI Shop
It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices.
Home
Steel Section Index
Introduction
The back mark is the distance from the back of an angle or channel web to the centre of a hole through the leg or flange. This dimension is selected
taking into account, access for tightening the bolt using an appropriate spanner, being close to centroidal axis ,and provision of required edge distance
The distance between centres of holes in flanges of joists, universal columns and Universal beams is selected to provide accessibility and acceptable
edge distance.
All Dimensions in mm
dimensions in mm
http://www.roymech.co.uk/Useful_Tables/Sections/Bolt_Holes.html 1/3
2/12/2018 Angle Section dimensions
All Dimensions in mm
Nominal leg S1 S2 S3 S4 S5 S6
25 15 - - - - -
30 20 - - - - -
40 23 - - - - -
45 25 - - - - -
50 28 (12) - - - - -
60 35 (16) - - - - -
65 35 (20) - - - - -
70 40 (20) - - - - -
75 45 (20) - - - - -
80 45 (20) - - - - -
90 50 (24) - - - - -
100 55 (24) - - - - -
120 - 45 (16) 50 (16) - - -
125 - 45 (20) 50 (20) - - -
150 - 55 (20 ) 55 (20) - - -
200 - 75(30) 75(30) 55 (20) 55 (20) 55 (20)
All Dimensions in mm
http://www.roymech.co.uk/Useful_Tables/Sections/Bolt_Holes.html 2/3
2/12/2018 Angle Section dimensions
76 48(10) 51 48 - - -
89 54 (12) 59 56 - - -
102 60 (16) 62 60 - - -
114 66(16) 74 70 - - -
127 72(20) 77 75 - - -
152 75(20) 102 90 - - -
203 91(24) 143 140 - - -
Universal columns
152 65 (24) 92 90 - - -
203 75 (24) 143 140 - - -
254 87 (24) 194 140 - - -
305 100 (24) 245 140 120 (24) 60 (24) 240 (24)
368 88 (24) 308 140 140 (24) 75 (24) 290 (24)
406 120 (24) 346 140 140 (24) 75 (24) 290 (24)
Universal Beams
102 50 (16) 62 54 - - -
127 62(20) 77 70 - - -
133 57 (20) 83 70 - - -
140 69 (24) 80 70 - - -
146 64 (24) 86 70 - - -
152 73 (24) 92 90 - - -
165 67 (24) 105 90 - - -
171 72 (24) 111 90 - - -
178 72 (24) 118 90 - - -
191 74 (24) 131 90 - - -
210 80 (24) 150 140 - - -
229 80 (24) 169 140 - - -
254 87 (24) 194 140 - - -
267 91(24) 207 140 90(20) 50 (20) 190 (20)
292 92(24) 232 140 100 (24) 60 (24) 220 (24)
305 100 (24) 245 140 120 (24) 60 (24) 240 (24)
419 112(24) 359 140 140 (24) 75 (24) 290 (24)
Home
Steel Section Index
http://www.roymech.co.uk/Useful_Tables/Sections/Bolt_Holes.html 3/3