Professional Documents
Culture Documents
Oew Gek
Oew Gek
Oew Gek
1
1. For an OEW, which items to be familiarized onboard?
2. As an OEW, explain the necessary precaution to be taken before doing work in a hazardous area?
3. As an OEW, write down the procedure with respect to taking over engineering watch at sea?
4. With reference to ISM Code, explain purpose of SMS, objective of SMS and advantages?
5. As an OEW, describe the procedures to start generator engine in cold weather. What are the possible
causes of generator engine fail to start?
6. (a) What are the objectives of Load Line Convention
(b) How to prepare emergency fire pump for PSC inspection
(c) Which particular must be written on MARPOL sample
7. (a) As an OEW, preparation for bunkering
(b) What is the meaning of SOPEP and which items are consist of plan.
8. As an OEW, explain the need for cleaning the fire side of a boiler and how to do it.
Group.2
9. (a) Sketch evaporation type fresh water generator onboard ship? (8)
(b) Describe the above sketch and giving salient temperature and pressure in the system. (8)
10. (a)
Sketch any type of oily water separator? (8)
(b) Describe the above sketch and explain the various stages of separation that occur as the liquid passes
through?
11. (a) Sketch Biological Sewage Treatment Plant (8)
(b) Explain above sketch (8)
Group.3
12. (a) Describe the Boiler cool down or blow down procedure in normal condition? (8)
(b) Explain the boiler flash up procedure from cool condition? (8)
13. (a) Sketch a water circulation of main steam boilers? (8)
(b) Why boiler water circulating is necessary? Describe the above sketch
14. (a) Describe the Boiler mounting fitted on a low pressure boiler? (8)
(b) Explain the function of mountings fitted? (8)
15. (a) Sketch and name the types of gauge glass fittings to boilers. (8 marks)
(b) How to renew the boiler gauge glass? (8 marks)
16. (a) Draw a line diagram of a complete feed heater system for an auxiliary boiler labelling all the principal
items and showing the direction of flow in all lines. (6)
(b) Explain how the feed supply to the boiler is regulated. (6)
(c) State what means are provided to prevent oil contamination of the feed water.(4)
Group.4
17 (a) Sketch Thermostatic Expansion Valve. (8)
(b) Describe the operation of above sketch. (8)
18. (a) Sketch central air condition system used onboard. (8)
(b) Explain above sketch. (8)
19. (a) A simple sketch for marine refrigeration system. (8)
(b) Describe above sketch.
20. (a) Draw a provision refrigerating plant system.
(b) Describe the above system.
(c) What are the provisions made to eliminate :(i) moisture, (ii) oil, and (iii) air in the system?