Professional Documents
Culture Documents
How To Repair A Danze Faucet
How To Repair A Danze Faucet
Danze faucets have become a popular fixture as of late, mostly because of their competitive pricing.
Because of the numerous models of Danze faucets produced, this article will describe the common
methods of repairing leaking and limited water supply issues that may affect your Danze faucet.
Shut off the water to the faucet, both hot and cold.
Plug the sink to prevent dropping any parts down the drain.
Knob type faucets will have a screw hidden beneath a cover plate that can be removed carefully with
a knife or flat tipped screwdriver.
Lever type handles may not have any screws holding them onto the cartridge stem and can be
pulled straight up. This may take a little wiggling and force.
Once your handles are removed you can the remove the lock nut that secures the cartridge using a
wrench. If your faucet is leaking under the handle the lock nut was likely not tight enough.
Remove and inspect the cartridge for damage, wear and debris. If the cartridge looks to be damaged
contact Danze customer support for a replacement part.
Poor water flow rate
A faucet's aerator is what normally produces a consistent stream of water but may over time become
fowled with particles and need to be cleaned or replaced.
Remove the aerator carefully with a pair of pliers covered by a rag to protect the finish.
To clean the aerator run water through it backwards and then soak in vinegar or CLR for a couple
hours.
Replace with another aerator the same size if necessary.