Professional Documents
Culture Documents
Rec HSS BC
Rec HSS BC
24.08.2018 v1.0
This spreadsheet is for the design of vertical bracing connections with the case of rectangular HSS shape.
This spreadsheet applies for General Uniform Force Method and Uniform Force Method Special Case 1, from AISC Steel
This spreadsheet dont be used without competent professional examination and verification of its accuracy, suitability a
The Author takes no liability for use of this spreadsheet and gives no guarantee that it is error free.
The Author not be responsible for any special, incidental or consequential damages whatsoever arising from the use of t
This spreadsheet is a free software and can be distributed freely and/or modify it under the terms of the GNU General P
f its accuracy, suitability and applicability by a licensed professional engineer, designer or architect.
rms of the GNU General Public License as published by Free Software Foundation.
VERTICAL BRACING CONNECTION Client: GANDO
***space for add
logo or name of Per Specification for Structural Steel Buildings, Prep. By: AOV
yuor company
ANSI/AISC 360-10 (LRFD) Rectangular HSS Bracing.
Date: 3/21/1974
A. INPUT DATA
Y
BEAM COLUMN bf
d 18.63 in d 16.00 in
tw 0.54 in tw 1.07 in X X
d
bf 11.1 in bf 15.9 in tw
tf 0.9 in tf 1.7 in
Beam and column steel grade Column Orientation: tf
Y
ASTM steel grade A-572-50 Y-Y
Fy 50 ksi ***Gusset plate connection to column web
Fu 65 ksi
CONNECTION PLATE
thickness, tp 0.500 in
Plate withd, hpl 7.00 in
Connection and Gusset plate steel grade
ASTM steel grade A-36
FYp 36 ksi
Fup 58 ksi
Pu
CONNECTION PLATE ARRANGEMENT
Bolt diameter, db 0.875 in lw
sbp
No of bolt rows, nbr 2
sb2
Row spacing, sb1 3.00 in sb2
No of bolt columns, nbc 2 sbe
bracing
Column spacing, sb2 3.00 in
Edge distance, sbe 1.50 in
Edge distance, sbp 2.00 in
Nominal bolt hole size, dh 0.938 in sb1 bolts
Bolt nominal area, Ab 0.601 in² hpl
B. BRACING DESIGN
Strength of the base metal, ΦRnp = 1.0 (0.6Fyp) ABM = 130 Kips NG
The cross-sectional area of the base metal at the weld, ABM = 2lw tp = 6.00 in²
Bolt bearing
Required shear strength per bolt, Vu =Vuc/nbolts = 67.5 kips/bolt
End bolts, Rn/ bolt =(1.2Lc tp Fu <= 2.4 d tp Fu) = 36 Kips
End holes, clear distance, Lc = sbe-dh/2 = 1.03 in
Interior bolts, Rn/ bolt =(1.2Lc tp Fu <= 2.4 d tp Fu) = 61 Kips
Interior holes, clear distance, Lc = sb2-dh = 3.00 in
216 Kips
161 Kips Gusset Plate
0 Kips
0 Kips
161 Kips
Gusset plate
radius of gyration, r = 0.14 in Connection
unbraced length, L = 9.76 in plate
The peak weld stress :𝑓𝑢 𝑝𝑒𝑎𝑘=√( 〖 (𝑓𝑢𝑎+𝑓𝑢𝑏) 〗 ^2+ 18.78 ksi
〖 (𝑓𝑢𝑣) 〗 ^2 ) =
The average weld stress:
𝑓𝑢 𝑎𝑣𝑒𝑟𝑎𝑔𝑒=(1/2)[√( 〖 (𝑓𝑢𝑎−𝑓𝑢𝑏) 〗 ^2+ 〖 (𝑓𝑢𝑣) 〗 ^2 ) 18.78 ksi
+√( 〖 (𝑓𝑢𝑎+𝑓𝑢𝑏) 〗 ^2+ 〖 (𝑓𝑢𝑣) 〗 ^2 )]=
The design weld stress is:
fu weld = max{fu peak, 1.25fu ave} tg/2 = 5.87 Kip/in
NG
Beam web local yielding capacity, ΦRnb = 732 Kips
Beam web local crippling capacity, ΦRnb = 735 Kips
***This edge of the gusset plate is connected to the column with double angles.
E.1. INPUT DATA
CONNECTION DOUBLE ANGLE ARRANGEMENT
No of bolt rows, nbr 5 B1 B1
B2
Row spacing, sbr 3.00 in sbe sbe
No of bolt columns, nbc 2
sbr sbr
VERTICAL BRACING CONNECTION Client: GANDO
***space for add
logo or name of Per Specification for Structural Steel Buildings, Prep. By: AOV
yuor company
ANSI/AISC 360-10 (LRFD) Rectangular HSS Bracing.
Date: 3/21/1974
End bolts, Rn/ bolt =(1.2Lc ta Fu <= 2.4 d ta Fu) = 25.3 kips/bolt
End holes, clear distance, Lc = sbe-dh/2 = 0.969 in
Interior bolts, Rn/ bolt =(1.2Lc ta Fu <= 2.4 d ta Fu) = 50.6 kips/bolt
Interior holes, clear distance, Lc = sbr-dh = 1.938 in
b=(g-ta-tp)/2 = 2.313 in
a= (2B1+tp-g)/2 = 1.500 in
b' =b-db /2 = 1.813 in
a' = a+db/2<=(1.25b+db/2) = 2.000 in
VERTICAL BRACING CONNECTION Client: GANDO
***space for add
logo or name of Per Specification for Structural Steel Buildings, Prep. By: AOV
yuor company
ANSI/AISC 360-10 (LRFD) Rectangular HSS Bracing.
Date: 3/21/1974
"
***Try fillet welds around the perimeter (three sides) of both angles.
B2 The resultant required force on the weld is:
Puc=√( 〖𝐻𝑢𝑐〗 ^2+ 161 Kips
kl
〖𝑉𝑢𝑐〗 ^2 ) =
Coefficient C for Eccentrically Loaded Weld Groups
q = tan-1( Huc/ Vuc) = 0.0 rad 0.0 °
F.2. BOLT TENSION SHEAR INTERACTION (TO CHECK ONLY WHEN TENSION FORCE)
End bolts, Rn/ bolt =(1.2Lc ta Fu <= 2.4 d ta Fu) = 25.0 kips/bolt
End holes, clear distance, Lc = sbe-dh/2 = 0.719 in
Interior bolts, Rn/ bolt =(1.2Lc ta Fu <= 2.4 d ta Fu) = 67.4 kips/bolt
Interior holes, clear distance, Lc = sbr-dh = 1.938 in
Bolt bearing strength , ΦRn = 18.8 kips/bolt OK
F.4. PRYING ACTION ON DOUBLE ANGLES (TO CHECK ONLY WHEN TENSION FORCE)
b=(g-ta-tw)/2 = 2.233 in
a= (2B1+tw-g)/2 = 1.518 in
b' =b-db /2 = 1.733 in
a' = a+db/2<=(1.25b+db/2) = 2.018 in
r = b'/a' = 0.859
β = 1/r (φTrn /Tu-1) = 15.290
p =min(2b,S) 3.000 in
δ=1-d'/p = 0.646
α'= 1.0 if β≥1.0 or min(1, 1/δ[β/(1-β)] if β<1.0 1.0
Thickness of angles required :
kl = 3.50 in
k= 0.241
xl=(𝑘𝑙)^2/(𝑙+2𝑘𝑙) =
0.57 in
al = B2-xl = 3.43 in
a= 0.24
Get C value with the table 8-8 of AISC Manual, use angle approximate to θ =32
C= 2.86
VERTICAL BRACING CONNECTION Client: GANDO
***space for add
logo or name of Per Specification for Structural Steel Buildings, Prep. By: AOV
yuor company
ANSI/AISC 360-10 (LRFD) Rectangular HSS Bracing.
Date: 3/21/1974
C1 = 1
Dreq = Puc /(φC C1 l) = 1.14 /sisxteenths 0.0713 in
Thickness of Thinner Part Joined, tmin = 0.50 in
Minimum size of fillet weld, tw min= 0.19 in 3/16
Weld size proposed, tw =
OK
F.6. SHEAR YIELDING OF ANGLES
Agv = 2 H ta = 14.5 in²
Shear yielding strength , ΦRn = Φ0.60 Fy Agv = 313 Kips OK
G. CONNECTION SUMMARY
CL column
3/16
Pu =270 Kips
1/4
5 @3''
VERTICAL BRACING CONNECTION Client: GANDO
***space for add
logo or name of Per Specification for Structural Steel Buildings, Prep. By: AOV
yuor company
ANSI/AISC 360-10 (LRFD) Rectangular HSS Bracing.
Date: 3/21/1974
2L x4x4x0.375''
5 @3''
CL beam
2L x4x4x0.5''
Beam
3/16
use bolts, Dia =1''
lh = 24''