Professional Documents
Culture Documents
Assignment Civil
Assignment Civil
Assignment Civil
50
50
50 6 x 50
50
50 50 65 75 50 50
2. The bottom chord tie member of a truss has to withstand a factored tension equal to
480 kN. Design a double angle section for the same. The angles are connected to 10mm
thick gussets at the ends. Design the connection detail also. Draw a detailed sketch.
3. The tension to be transferred to plate member is 1500 kN. Design the simple plate
member using allowable stress method and then design the tension splice for that plate
using (a) lap splice (b) butt splice using bolted and field welded connections. Draw a
detailed sketch
4. Find the tensile load carrying capacity of a channel ISMC-175 shown below. The two
flanges are connected to the gussets by 16 mm diameter bolts by a connection length of
200 mm. Find out number of bolts and sketch the connections.