Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1of 4

Switch#sh inv

NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4948E 1 slot switch "
PID: , VID: , SN: CAT1552S77U

NAME: "Supervisor(slot 1)", DESCR: "10/100/1000BaseT (RJ45), 10GE (SFP+) Supervisor


with 48 10/100/1000BASET ports and 4 10GE SFP+ port"
PID: WS-C4948E , VID: V05 , SN: CAT1552S77U

NAME: "Power Supply 1", DESCR: "Power Supply ( AC 300W )"


PID: PWR-C49E-300AC-R , VID: , SN: QCS1536U04D

NAME: "Power Supply 2", DESCR: "Power Supply ( AC 300W )"


PID: PWR-C49E-300AC-R , VID: , SN: QCS1537U05T

Switch#sh env
no temperature alarms

Module Sensor Temperature Status


------+--------------------------+--------------------+------------
1 air inlet 30C (49C,64C,67C) ok
1 air outlet 48C (69C,85C,88C) ok

Power Fan Inline


Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C49E-300AC-R AC 300W good good n.a.
PS2 PWR-C49E-300AC-R AC 300W good good n.a.

Power supplies needed by system : 1


Power supplies currently available : 2

Chassis Type : WS-C4948E

Power consumed by backplane : 0 Watts

Switch Bandwidth Utilization : 0%

Supervisor Led Color : Green

Module 1 Status Led Color : Green

Fantray : Good
Fantray removal timeout : 120

Power consumed by Fantray : 30 Watts

Switch#sh diagn r m a

Current bootup diagnostic level: minimal

module 1: SerialNo : CAT1552S77U

Overall Diagnostic Result for module 1 : PASS


Diagnostic level at card bootup: minimal

Test results: (. = Pass, F = Fail, U = Untested)


1) supervisor-bootup ---------------> .
2) linecard-online-diag ------------> .
3) stub-rx-errors ------------------> .
4) supervisor-rx-errors ------------> .
5) online-diag-tdr:

Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
----------------------------------------------------------------------------
. . . . . . . . . . . . . . . . . . . . . . . .

Port 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
----------------------------------------------------------------------------
. . . . . . . . . . . . . . . . . . . . . . . .

Port 49 50 51 52
----------------
. . . .

Switch#sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M),
Version 15.2(4)E8, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Fri 15-Mar-19 14:20 by prod_rel_team

ROM: 12.2(44r)SG11
Switch uptime is 7 minutes
System returned to ROM by power-on
System image file is "bootflash:cat4500e-entservicesk9-mz.152-4.E8.bin"
Hobgoblin Revision 21, Fortooine Revision 1.40

Last reload reason: power-on

This product contains cryptographic features and is subject to United


States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to


export@cisco.com.

cisco WS-C4948E (MPC8548) processor (revision 5) with 1048576K bytes of memory.


Processor board ID CAT1552S77U
MPC8548 CPU at 1GHz, Cisco Catalyst 4948E
Last reset from PowerUp
1 Virtual Ethernet interface
48 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.

Configuration register is 0x2102

Switch#dir all
Directory of bootflash:/

6 -rw- 41482478 Apr 28 2019 05:09:46 +00:00 cat4500e-entservicesk9-


mz.152-4.E8.bin

125546496 bytes total (74002432 bytes free)


Directory of system:/

2 -r-- 0 <no date> default-running-config


4 dr-x 0 <no date> memory
1 -rw- 2527 <no date> running-config
3 dr-x 0 <no date> vfiles

No space information available


Directory of tmpsys:/

6 drw- 0 <no date> eem_lib_system


5 drw- 0 <no date> eem_lib_user
18 -rw- 0 <no date> eem_pnt_0
20 -rw- 0 <no date> eem_pnt_1
38 -rw- 0 <no date> eem_pnt_10
40 -rw- 0 <no date> eem_pnt_11
42 -rw- 0 <no date> eem_pnt_12
44 -rw- 0 <no date> eem_pnt_13
46 -rw- 0 <no date> eem_pnt_14
48 -rw- 0 <no date> eem_pnt_15
22 -rw- 0 <no date> eem_pnt_2
24 -rw- 0 <no date> eem_pnt_3
26 -rw- 0 <no date> eem_pnt_4
28 -rw- 0 <no date> eem_pnt_5
30 -rw- 0 <no date> eem_pnt_6
32 -rw- 0 <no date> eem_pnt_7
34 -rw- 0 <no date> eem_pnt_8
36 -rw- 0 <no date> eem_pnt_9
4 drw- 0 <no date> eem_policy
8 drw- 0 <no date> eem_pub
17 -rw- 0 <no date> eem_rpc_0
19 -rw- 0 <no date> eem_rpc_1
37 -rw- 0 <no date> eem_rpc_10
39 -rw- 0 <no date> eem_rpc_11
41 -rw- 0 <no date> eem_rpc_12
43 -rw- 0 <no date> eem_rpc_13
45 -rw- 0 <no date> eem_rpc_14
47 -rw- 0 <no date> eem_rpc_15
21 -rw- 0 <no date> eem_rpc_2
23 -rw- 0 <no date> eem_rpc_3
25 -rw- 0 <no date> eem_rpc_4
27 -rw- 0 <no date> eem_rpc_5
29 -rw- 0 <no date> eem_rpc_6
31 -rw- 0 <no date> eem_rpc_7
33 -rw- 0 <no date> eem_rpc_8
35 -rw- 0 <no date> eem_rpc_9
7 drw- 0 <no date> eem_temp
1 dr-x 0 <no date> lib
9 drw- 0 <no date> macro_scripts

No space information available


Directory of crashinfo:/

1 -r-- 10700 <no date> data


2 -r-- 0 <no date> data.bin

No space information available


Directory of cat4000_flash:/

1 -rw- 0 <no date> vlan.dat

524284 bytes total (524284 bytes free)


Directory of profiler:/

1 -r-- 0 <no date> data

No space information available


Directory of nvram:/

512 -rw- 0 <no date> startup-config


513 ---- 0 <no date> private-config
514 -rw- 0 <no date> underlying-config
1 ---- 0 <no date> rf_cold_starts
2 ---- 461 <no date> persistent-data
3 -rw- 997 <no date> ifIndex-table.gz

524284 bytes total (520136 bytes free)


Switch#

You might also like