Professional Documents
Culture Documents
GEPON OLT CLI User Manual
GEPON OLT CLI User Manual
CONTENTS
1 OVERVIEW................................................................................................................................... 6
1.1 INTRODUCTION................................................................................................................. 6
1.2 COMMAND EXPLANATIONS IN EACH SECTION..................................................................7
1.3 COMMAND PRESENTATION IN EXAMPLES.........................................................................7
1.4 COMMAND SYNTAX.......................................................................................................... 7
1.5 EDITING FUNCIONS, KEYSTROKES, AND ABBREVIATIONS..................................................7
2 CONFIGURATION PREPARATION................................................................................................... 8
2.1 CONSOLE CONNECTION.................................................................................................... 8
2.2 NETWORK CONNECTION................................................................................................... 8
3 CLI COMMAND MODE................................................................................................................. 8
3.1 LOGIN................................................................................................................................ 8
3.2 CLI COMMAND HELP......................................................................................................... 9
3.3 CONFIGURE TERMINAL..................................................................................................... 9
4 OLT WORKING MODE................................................................................................................. 10
4.1 WORKING MODE CONFIGURE......................................................................................... 10
4.2 SHOW OLT WORKING MODE........................................................................................... 10
5 OLT VLAN CONFIGURE................................................................................................................ 10
5.1 ENABLE/DIASABLE 802.1Q VLAN..................................................................................... 10
5.2 CREATE VLAN................................................................................................................... 10
5.3 DELETE VLAN................................................................................................................... 10
5.4 ADD VLAN MEMBER........................................................................................................ 10
5.5 DELETE VLAN MEMBER................................................................................................... 10
5.6 SHOW VLAN MEMBER..................................................................................................... 10
5.7 SHOW VLAN STATE.......................................................................................................... 11
6 PON PORT SETTING.................................................................................................................... 11
6.1 ENTER PON MANAGEMENT............................................................................................ 11
6.2 CONFIGURE PON PVID..................................................................................................... 11
6.3 ENABLE PON PORT.......................................................................................................... 11
6.4 DISABLE PON PORT......................................................................................................... 11
6.5 CONFIGURE P2P.............................................................................................................. 11
6.6 SHOW OLT OPTICAL......................................................................................................... 11
6.7 MAC ADDRESS TABLE MANAGEMENT.............................................................................11
6.7.1 ENABLE/DISABLE MAC LEARNING.........................................................................11
6.7.2 CONFIGURE MAC AGING-TIME.............................................................................11
6.7.3 FLUSH MAC ADDRESS........................................................................................... 11
6.7.4 SHOW MAC-ADDRESS-TABLE................................................................................11
6.8 PON ACL.......................................................................................................................... 12
6.8.1 SHOW PON ACL.................................................................................................... 12
6.8.2 ADD PON ACL....................................................................................................... 12
6.8.3 DELETE ACL........................................................................................................... 13
7 ONU MANAGEMET.................................................................................................................... 13
GEPON OLT CLI User Manual
1 OVERVIEW
1.1 INTRODUCTION
This document is used for those who perform all tasks for the OLT once it has been successfully
installed. Users of this Guide should understand EPON technology and have experience
configuring EPON devices.
OLT system could support inband and outband network management mode and NMS network
management.
The user can use several different network interfaces to do network management, such as those
listed below:
• CONSOLE CLI Management
• TELNET CLI Management
This manual introduce CLI configuration function of EPON OLT. In the initial setup step of OLT,
there are two ways based on CLI management to login system:
• Terminal Emulation of CONSOLE port (RJ-45)
• Telnet of management port (RJ-45)
learned.
Action Key Sequence
Move cursor within command line left and right arrow
Delete character to left of cursor [Delete] or [Backspace]
Clear command line [Ctrl/U]
Recall previous command in command history CTRL/P or up arrow
Recall next command in command history CTRL/N or down arrow
Automatically complete a partially entered [Tab] or [Ctrl/I]
command keyword
2 CONFIGURATION PREPARATION
2.1 CONSOLE CONNECTION
There is a Console port in the front panel of Switch Control Card .The command line configuration
interface is enabled via console port connecting to the NMS’s superior terminal. Super terminal’s
basic configuration is as follows:
3.1 LOGIN
System provide two login accounts default as follows:
Username Password
admin admin
guest NULL
After you log in successfully, the following interface pops up :
admin login
Username:admin
Password:*****
Entry level 2(manager) successfully!
epon#
----------------------------------------------------------------------
guest login
Username:guest
Entry level 1(visitor)
epon>
Configuration mode allows distributing and modifying each port separately for the specific
parameters (Optical Line Terminal).
ONU configuration mode is the sub-mode of configuration command mode of olt, and is used to
configure the logical port parameters of ONU For example: epon(PON-1)# onu 60
System prompt is epon(PON-1/onu-60)#
7 ONU MANAGEMET
7.1 SHOW ONLINE ONU
command show interface olt <ponId> online-onu
<ponId> pon1~pon8
<linkID> 1~8
<rate> <0~2000000>PPS
9 OLT RSTP
9.1 ENABLE/DISABLE RSTP
command epon#rstp {enable | disable}
10 OLT MIRROR
10.1 CONFIGURE DEST-PORT
command epon#mirror dest-port <port>
<port> ge1~ge12
11 OLT PORT-ISOLATION
11.1 CREATE ISOLATE-GROUP
command epon#port-isolate-group <groupID>
<groupID> 1~16
12 ONU AUTH
12.1 DISABLE ONU AUTH FUNCTION
command epon#
13 OLT ETHERNET-RING
<ringId> 1~4094
14 OLT STORM-CONTROL
14.1 CONFIGURE UPLINK/PON STORM-CONTROL
command epon(GE-1)#storm-control <type> <rate>
epon(PON-1)#storm-control <type> <rate>
<type> <broadcast | multicast |unknown-uc>
<rate> <0~2000000>PPS
15 OLT IGMP-SNOOPING
15.1 ENABLE/DISABLE IGMP-SNOOPING
command epon#igmp-snooping {enable|disable}
<vid> 1~4094