Professional Documents
Culture Documents
PowerFlex 40 - 40P Drive, Electro-Mechanical Braking With A Opto - Output
PowerFlex 40 - 40P Drive, Electro-Mechanical Braking With A Opto - Output
PowerFlex 40 - 40P Drive, Electro-Mechanical Braking With A Opto - Output
My TechConnect
During this time, we are committed to being with you every step of the way, and it is critical you have the
support you need. We are offering several special remote support programs to help minimize disruptions in
your operations. Login or sign up to learn more...
ADD TO FAVORITES
Document ID QA4034
Summary
PowerFlex 40/40P drive, Electro-Mechanical Braking with a Opto/Output
Question
What is the procedure to control Electro-Mechanical Braking by one drive Opto output on PowerFlex 40 or 40P
AC drive?
Top
PowerFlex 40 drive
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/47164/loc/en_US 1/6
17/4/2020 PowerFlex 40/40P drive, Electro-Mechanical Braking with a Opto/Output
Answer
If one of the Opto output 1 or 2 is connected to the user-supplied electromechanical brake coil relay, the settings
will be:
Parameter A058 [Opto Out1 Sel] or Parameter A061 [Opto Out2 Sel] = 22 EM Brk
Cntrl
Parameter A064 [Opto Out Logic] = 0, 1 or 2 value set in accordance with your
adopted wiring
Parameter P037 [Stop Mode] = 8 "Ramp+EM B,CF or 9 Ramp+EM Brk to enable the
electromechanical brake option
Parameter A160 [EM Brk Off Delay] = value set as required
Parameter A161 [EM Brk On Delay] = value set as required
Parameter P034 [Minimum Freq] = value set as required (Must be a Value other than
Zero)
Before your tests, power cycle the drive to make the settings effective
Resistive Rating: 3.0A at 30V DC, 3.0A at 125V AC, 3.0A at 240V AC
Inductive Rating: 0.5A at 30V DC, 0.5A at 125V AC, 0.5A at 240V AC
Opto Outputs:
30V DC, 50mA Non-inductive
Top
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/47164/loc/en_US 2/6
17/4/2020 PowerFlex 40/40P drive, Electro-Mechanical Braking with a Opto/Output
Top
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/47164/loc/en_US 3/6
17/4/2020 PowerFlex 40/40P drive, Electro-Mechanical Braking with a Opto/Output
Top
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/47164/loc/en_US 4/6
17/4/2020 PowerFlex 40/40P drive, Electro-Mechanical Braking with a Opto/Output
Note: It is necessary to add a recovery diode such as a 1N4004 in inverse parallel with the user-supplied
electromechanical brake coil relay (inductive load) or with the intermediary auxiliary relay (if this last one is
necessary), in order to prevent damage to the Opto output.
For more details, the PowerFlex 40 Adjustable Frequency AC Drive User Manual, Publication 22B-UM001
RATE CONTENT
Recently Viewed
DISCLAIMER
This knowledge base web site is intended to provide general technical information on a particular subject or subjects
and is not an exhaustive treatment of such subjects. Accordingly, the information in this web site is not intended to
constitute application, design, software or other professional engineering advice or services. Before making any
decision or taking any action, which might affect your equipment, you should consult a qualified professional advisor.
ROCKWELL AUTOMATION DOES NOT WARRANT THE COMPLETENESS, TIMELINESS OR ACCURACY OF ANY OF THE
DATA CONTAINED IN THIS WEB SITE AND MAY MAKE CHANGES THERETO AT ANY TIME IN ITS SOLE DISCRETION
WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS "AS IS." IN NO EVENT
SHALL ROCKWELL BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS PROFIT OR DAMAGE, EVEN IF ROCKWELL AUTOMATION HAVE BEEN ADVISED ON THE
POSSIBILITY OF SUCH DAMAGES.
ROCKWELL AUTOMATION DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED IN RESPECT OF THE
INFORMATION (INCLUDING SOFTWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR
A PARTICULAR PURPOSE, MERCHANTABILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not
countenance the exclusion of implied warranties; thus, this disclaimer may not apply to you.
www.rockwellautomation.com
Top
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/47164/loc/en_US 6/6