Professional Documents
Culture Documents
Gas Density Monitor Model 233.52.063, With Gas Filling: Applications
Gas Density Monitor Model 233.52.063, With Gas Filling: Applications
Applications
Special features
■■ Temperature-compensated pressure gauge with Bourdon
tube
■■ Suitable for outdoor use
■■ Wetted parts from stainless steel
■■ Local readout with alarm contacts
■■ Hermetically leak-tight, therefore no negative impact by
atmospheric pressure fluctuations and differences in
altitude
Description
Gas density is a crucial operating parameter for high-voltage Conventional pressure gauges are not suitable here as the
switchgear. If the required gas density is not present, safe gas pressure changes depending on the ambient tempera-
operation of the plant cannot be guaranteed. ture, altitude and even atmospheric pressure.
The above factors together can amount up to 20 % of the
The WIKA gas density measuring instruments provide working pressure and thus falsify the measurement signifi-
reliable warnings against dangerously low gas cantly.
concentrations even in extreme environmental conditions. For this reason, all WIKA gas density measuring instruments
If the gas density decreases due to a leakage the magnetic are temperature compensated and hermetically sealed.
snap-action contacts, which are actuated by the pointer,
switch reliably and with repeatable accuracy.
High-voltage test
2 kV, 50 Hz, 1 s (wiring against case)
Electrical connection
Attached cable: length 1 m, with glass bushing
Process connection
G ¼ B according to EN 837, back mount
Stainless steel
Wrench flat 14 mm
Pressure element
Stainless steel, welded
Leak tightness: ≤ 1 · 10-8 mbar · l / s
Test method: spectrometry of helium mass
14012926.03
Alarm contact model 821 Dimensions in mm
X Y Z
Single and double contacts, without galvanic isolation 66.5 36 86
Double contacts, with galvanic isolation 76.5 46 96
Ordering information
Model / nominal size / scale range / process connection / filling pressure / calibration pressure / switch point /
switching function / options
© 2011 WIKA Alexander Wiegand SE & Co. KG, all rights reserved.
The specifications given in this document represent the state of engineering at the time of publishing.
We reserve the right to make modifications to the specifications and materials.