Professional Documents
Culture Documents
Drafts - 2on532crete - Dec 5223, 2020
Drafts - 2on532crete - Dec 5223, 2020
Drafts - 2on532crete - Dec 5223, 2020
65
www.hilti.ca
Company: Page: 1
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Concrete - Dec 3, 2020 Date: 2020-12-03
Fastening point:
Specifier's comments:
1 Input data
Anchor type and diameter: Hex Head ASTM F 1554 GR. 36 1 1/4
Item number: not available
Effective embedment depth: hef = 500.0 mm
Material: ASTM F 1554
Evaluation Service Report: Hilti Technical Data
Issued I Valid: -|-
Proof: Design Method CSA A23.3-14 / CIP
Stand-off installation: without clamping (anchor); restraint level (anchor plate): 2.00; eb = 25.4 mm; t = 25.0 mm
2
Hilti Grout: CB-G EG, epoxy, fc,Grout = 103.00 N/mm
Anchor plate :
R lx x ly x t = 500.0 mm x 500.0 mm x 25.0 mm; (Recommended plate thickness: not calculated)
R
- The anchor calculation is based on a rigid anchor plate assumption.
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2020 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
1
Hilti PROFIS Engineering 3.0.65
www.hilti.ca
Company: Page: 2
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Concrete - Dec 3, 2020 Date: 2020-12-03
Fastening point:
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2020 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
2
Hilti PROFIS Engineering 3.0.65
www.hilti.ca
Company: Page: 3
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Concrete - Dec 3, 2020 Date: 2020-12-03
Fastening point:
3 Warnings
• Please consider all details and hints/warnings given in the detailed report!
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2020 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
3
Hilti PROFIS Engineering 3.0.65
www.hilti.ca
Company: Page: 4
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Concrete - Dec 3, 2020 Date: 2020-12-03
Fastening point:
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2020 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan