Professional Documents
Culture Documents
Tempering: - Cooling: - : T-T-T Time-Temperature-Transformation By: Juan Camilo Restrepo
Tempering: - Cooling: - : T-T-T Time-Temperature-Transformation By: Juan Camilo Restrepo
-When the process occurs the graphic shows -Is shown in the graphics as a faster
how it will start touching the phase lines, to cooling period.
pass from one crystalline structure to -small grain size
another. -It is called quenching.
-shown in the graph, it says that you start in -it is used to increase toughness and
austenite and start changing during the should be performed after hardening.
cooling process, and it will not become an
reversible process.
Tempering
T-T-T Time-Temperature-
Transformation
By:
Juan Camilo Restrepo
ANNEALING:
-The process that identifies the
annealing is when you have a slowly
cooling period of time.
PHASES: -This treatment could change the
-Martensite: Is a hard form given by the steel physical and chemical properties of
crystalline structure. the material.
-Big grains
-Bainite: is a microstructure that happens in -The heating point should be close to
steel during the application of temperatures the melting
between (100ºc-600ºc).
Annealing
(rodriguez,2015)
(Daniels,2008)
Referencies:
-http://metallurgyfordummies.blogspot.com/2010/04/martensite-formation_08.html
-https://www.researchgate.net/figure/Schematic-diagram-of-the-continuous-annealing-
process_fig1_248253226.
-https://www.intechopen.com/books/simulated-annealing-advances-applications-and-
hybridizations/simulated-annealing-evolution